Ge Jgb860sejss Parts

This small cooktop bracket secures designated components beneath the cooktop surface, keeping them properly positioned and stable. Replace a damaged or missing bracket to restore alignment and reduce movement or rattling during use.

• Provides mounting support for specific under-top components, per model design
• Helps maintain proper alignment and stability of cooktop parts
• Replace when visibly bent, cracked, or corroded

• Disconnect power; for gas models, also shut off gas and allow the unit to cool
• Remove surface components as required (grates/caps/heads for gas; elements/panels for electric) to access under the top
• Lift or remove the cooktop as directed in your model's service information and secure the new bracket with existing hardware
• Reassemble, verify alignment, and for gas units check for leaks if any gas connections were disturbed

Replacement front frame bumper that cushions and supports the appliance's front frame or door trim, helping reduce vibration and prevent metal-on-metal contact—restoring a secure, quiet fit for the door or trim assembly. What it does:

• Cushions the front frame/door trim to prevent wear, chipping, and metal rubbing.
• Helps align and stabilize the door/frame for proper closing and fit.
• Reduces rattling and vibration noise during operation.
• Commonly replaced when the door feels loose, rubs against the cabinet, or makes noise.

• Disconnect power to the appliance before beginning any repair.
• May require removal of the door trim or front panel—use basic hand tools and keep fasteners organized.
• Seat the bumper fully in its mounting location; avoid forcing or deforming the part.

The GE Glass Panel Door Assembly is an OEM part for GE ranges. It forms the main barrier sealing in heat during the cooking process. 

Causes of a bad door assembly can include cracks, chips, or breaks in the glass, damage to handles or hinges over time, or issues with the door seal not forming properly.

Symptoms of a bad door assembly include:

• Improper sealing when closed, allowing heat to escape 
• Difficulty smoothly opening and closing the door  
• Appearance issues such as cracks, fogging or film on the glass
• Warping of the internal panel affecting the door closure

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

The Electrode and Harness Assembly is an OEM part for GE gas ranges. As a critical safety mechanism, it works to detect the presence of gas and spark the burners to life properly during each cooking cycle.

Causes of a faulty assembly can include cracks in electrode materials, failures in wiring insulation or connections, or sensor electrodes clogged with debris over time.  

Symptoms include: 

• Unreliable or intermittent ignition of one or more burners
• Burners that will not light at all using the Ignite function  
• Repeated safety shutoffs during use
• Error codes or sensor fault messages displayed

This GE replacement assembly ensures your appliance's gas detection and ignition system operate dependably to deliver safe, reliable stove-top cooking performance. It is also compatible with Hotpoint, RCA and select Kenmore models.
 

The Door Hinge is an OEM part for GE gas ranges. It acts as the pivot point that allows the oven door to smoothly and securely open and close. 

Symptoms of a bad hinge can include wear and tear over time, damage or bending due to excessive force applied while opening or closing the door, or failure of components that assist the door movement.  

Symptoms of a bad door hinge include:

• The door becoming misaligned and no longer closing or sealing properly 
• Difficulty or resistance when opening and closing the door
• Noise or squeaking coming from the hinge area
• Visual signs of damage or bending to the hinge itself

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Stainless Steel Handle is an OEM replacement part for GE electric range models. It provides a sturdy grip for opening and closing the oven door.

Causes of failure include loosened mounting screws from repetitive use, bent or damaged profile from impact, and corrosion affecting appearance.  

Symptoms of a faulty handle include:

• Difficulty smoothly opening and closing the oven door 
• Risk of pinched fingers if handle wobbles during operation
• Degraded aesthetic and value of the appliance over time

This OEM stainless handle also fits select Hotpoint and RCA electric ranges.

The Safety Valve is an OEM part for GE gas ranges. It automatically shuts off the gas supply if excess pressure is detected, serving as an essential safety component. 

Causes of failure could be debris lodged in the valve opening, worn sealing edges from repeated exposure to extreme temperatures, or damage from impact over time.

Symptoms of a bad safety valve are:

• Inability to ignite or light the oven burners
• Continuous gas leaks even when oven is off 
• Responsiveness issues when adjusting knob valves

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models.

A replacement burner valve cover that protects and conceals the gas valve assembly on compatible ranges, helping keep valve components clear of spills and debris for more reliable burner operation. What it does:

• Covers and protects the gas valve area from food, moisture and spills.
• Helps prevent debris from interfering with valve knobs and internal valve parts.
• Can reduce intermittent ignition or burner performance issues caused by contamination.
• Restores the finished appearance around the valve for safer, cleaner operation.

• Always shut off the gas supply and unplug the appliance before servicing.
• Use basic hand tools; handle the valve area gently to avoid disturbing fittings or tubing.
• After installation, check for gas leaks with a soapy-water solution or a proper leak detector—do not use an open flame.

This replacement oven rack restores a sturdy, level surface for cookware. Replace a bent, rusted, or missing rack to safely position dishes at the proper height for baking and broiling. What it does:

• Supports pans and dishes on a stable, level surface during baking or broiling
• Slides along the oven's side supports to adjust rack positions
• Helps maintain correct spacing from the heat source for recipes
• Replaces racks that are bent, rusted, missing, or have broken welds/stops

• Allow the oven to cool completely and switch off power at the breaker for safety
• Pull the old rack forward to the stop, lift the front to clear the stop tabs, and remove
• Align the new rack with the side rails (stop notches toward the rear if present) and slide it in fully
• Follow your user manual for self-cleaning; many models require removing racks to protect the finish

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

This bake burner is the oven's gas burner assembly that produces the controlled flame for baking and roasting. It restores proper oven heat so food cooks evenly and the oven reaches set temperatures. What it does:

• Provides the primary gas flame for the oven bake function
• Enables even heat distribution across the oven cavity for consistent baking
• Works with the oven burner tube and igniter to light and maintain a steady flame
• Commonly replaced when the oven won't heat, has weak flame, or bakes unevenly

• Disconnect power to the appliance and shut off the gas supply before servicing
• Inspect and replace any damaged gaskets or mounting hardware; follow OEM alignment for proper ignition
• After installation, check for proper ignition and stable flame; perform a leak test on gas fittings

This replacement screw secures appliance components and helps keep panels, brackets, and controls firmly attached for reliable operation. It's a simple, direct fix when a mounting screw is missing, loose, or stripped. What it does:

• Fastens panels, trim, brackets or electrical components to reduce movement and rattling.
• Restores proper alignment of parts that shift when a screw is missing or worn.
• Helps maintain electrical and mechanical connections by keeping components seated.
• Common symptom: loose or vibrating panels, trim gaps, or visibly missing hardware.

• Disconnect power to the appliance before accessing internal components.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Thread gently and avoid overtightening to prevent stripping the mating threads or cracking surrounding parts.
• Keep any removed hardware organized to ensure placement of all required fasteners during reassembly.

The Dual Safety Valve is an OEM part for GE gas ranges. As a critical safety component, it works to automatically shut off the flow of gas in the event of a flame outage, leak, or backdraft.  

Symptoms of a bad safety valve include:

• Inability to ignite or light one or more gas burners  
• Gas smells detected but all control knobs are off
• Repeated unwanted shutting off of burners 
• Difficulty achieving or maintaining desired heat levels

Causes can be jammed or stuck valve components due to dirt or corrosion, cracks in valve material from repeated heating cycles, or loose internal mechanisms. This OEM replacement ensures your appliance operates safely by properly regulating gas flow.

This GE part is also compatible with Hotpoint, RCA, and Kenmore gas rangers. Replace yours today to restore performance and protect your home and family from gas leaks or other hazards.
 

Package of 12

The Latch Automatic is an OEM part for GE gas ranges. It is responsible for securely latching the oven door shut during baking and broiling cycles.  

Causes of a bad latch include normal wear and tear, abuse like slamming the door, or failure of electronic sensors meant to monitor latch position.

Symptoms of a bad automatic latch include:

• The door popping or bouncing open during use  
• Difficulty latching the door fully in the closed position
• Loose movement, wobbling, or shaking of the door when latched

This OEM GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.