Gfd28gelds Parts

The Evaporator Cover is an OEM replacement part for GE refrigerators. It is responsible for covering and protecting the evaporator coils located inside the refrigerator or freezer compartment.

A bad evaporator cover can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as frost buildup, inconsistent cooling, or excessive noise, it may indicate a need to replace the evaporator cover.

Symptoms of a bad evaporator cover include:

• Frost accumulation on the coils
• Uneven cooling or inconsistent temperature
• Excessive noise or vibration during operation

Restore your refrigerator by replacing the faulty evaporator cover with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This bar reinforcement is a replacement support brace that restores strength and alignment to the appliance trim or door assembly. It helps secure panels and prevents sagging or flexing for reliable everyday use. What it does:

• Provides structural support for the door or trim assembly to reduce flex and maintain alignment
• Restores a loose or sagging panel to proper position
• Helps keep connected components stable during normal operation
• Designed to fit into the original mounting points and distribute load where the factory part did

• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power (or gas, if applicable) and remove food/contents from working area before starting

The Refrigerator Slide Lower Freezer is an OEM replacement part for GE refrigerators. It is a sliding component designed to facilitate smooth and effortless access to the lower freezer compartment. This OEM part ensures that the lower freezer drawer can glide in and out seamlessly, allowing for convenient storage and retrieval of frozen items.

Symptoms of a bad Refrigerator Slide Lower Freezer include:

• Difficulty opening or closing the lower freezer drawer
• Freezer drawer catching or sticking during operation
• Noisy or grinding sounds when sliding the drawer
• Drawer not staying in position when opened or closed

Causes of a bad lower freezer slide can include wear and tear from repeated use, damage from mishandling or overloading, or issues with the slide mechanism itself. Over time, the slides may become worn, misaligned, or obstructed, leading to operational problems.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This evaporator block seal is a refrigerator freezer gasket that helps seal the evaporator assembly to limit air and moisture migration, reducing frost buildup and helping the cooling system run efficiently. What it does:

• Seals the evaporator block area to prevent moist air from reaching cold surfaces
• Helps reduce frost and ice accumulation on the evaporator and evaporator cover
• Supports consistent cooling by maintaining the intended airflow path
• Can reduce defrost frequency when the original seal is damaged or worn

• 1 evaporator block seal

• Disconnect power to the appliance before starting any repair
• Replacement typically requires removing the evaporator cover or assembly; handle evaporator fins and components carefully
• Inspect surrounding foam, clips, or adhesive; replace or resecure as needed to ensure a proper seal
• After installation, restore power and verify proper cooling and defrost operation

This evaporator cover houses and protects the freezer evaporator coil while directing airflow for even cooling and helping limit frost buildup. It restores proper airflow routing behind the freezer liner for consistent temperature control. What it does:

• Protects the evaporator coil from contact and debris
• Guides cold air from the evaporator into the freezer compartment
• Helps reduce localized frost accumulation on the coil and liner
• Can address symptoms like poor/freezer cooling, uneven temperatures, or increased frost/icing

• One evaporator cover (housing) as shown

• Disconnect power before beginning any repair
• Remove interior panels and shelves per your model's service instructions to access the evaporator area
• Handle carefully to avoid damaging the cover tabs, mounting points, or nearby wiring/insulation
• After installation, reassemble panels and verify proper fan operation and normal cooling

This selector control provides the hi/lo switching function for the oven/range heating circuit, restoring user control over high and low heat settings. It replaces a failed selector so the range can select the proper heat level reliably. What it does:

• Switches between high and low heat settings for the heating element or burner
• Restores control when heat setting changes do not respond or stick
• Helps eliminate intermittent or no-heat conditions caused by a worn selector
• Matches OEM function and mounting for a direct replacement

• One selector control assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle electrical connections carefully; note wire locations or take a photo before removal
• Use basic hand tools; do not force connectors or mounting tabs

This replacement filter cover houses the filter's RFID tag and secures the cartridge in the refrigerator's filter compartment, restoring proper seating and allowing the dispenser/monitoring system to detect the filter. What it does:

• Protects and secures the water filter cartridge in the filter housing
• Houses the RFID/tag sensor so the appliance can recognize the installed filter
• Helps ensure a proper seal and correct filter seating
• Commonly replaced when the cover is cracked, broken, missing, or the filter won't stay in place
• Resolves filter-detection or filter-status errors when the cover or RFID is damaged

• Remove the filter cartridge before replacing the cover; follow the refrigerator owner's manual for proper removal
• Inspect the filter and housing for damage or debris before installing the new cover
• Align and snap the cover into place until it seats securely; the filter status light resets per the appliance instructions

This rotating bin roller O-ring is a small replacement seal that helps the fridge bin roller spin smoothly and stay secured to its shaft. Replacing a worn ring restores proper roller function and reduces noisy or wobbly drawer movement. What it does:

• Fits around the rotating bin roller to keep the roller centered on its shaft
• Prevents excess play that can cause the bin to wobble or bind
• Helps reduce squeaks and uneven rolling during drawer operation
• Restores reliable rotation after the original O-ring cracks or wears thin

• Basic, clip-on installation; remove the bin and roller assembly to access the O-ring
• Inspect the roller and shaft for debris or damage and clean before installing the new O-ring
• Use proper hand tools and avoid excessive force; replace if the roller or shaft is worn
• Disconnect power to the appliance if removing electrical components or working near lights/controls