Gfe26jsmss Parts

This freezer door gasket forms an airtight seal between the freezer door and cabinet. Replacing a worn seal helps keep cold air in, reduce frost and condensation, and support consistent freezer temperatures.

• Seals the door perimeter to prevent warm air leaks
• Helps maintain stable internal temperature and humidity
• Reduces frost/ice buildup and moisture around the opening
• Common symptoms of failure: torn or warped gasket, poor door seal, frost along edges, temperature fluctuations

• Unplug the refrigerator before starting; open the freezer door
• Warm the new gasket with warm water or a hair dryer on low to relax it for easier installation
• Seat the corners first, then press the gasket evenly into the channel/retainer and ensure uniform contact around the perimeter
• Perform a paper-slip test and allow the gasket to conform after closing the door for several hours

The Damper Assembly is an OEM component specifically designed for GE refrigerators. This assembly is located within the fresh food compartment and functions to control airflow and temperature regulation. 

The damper works with the evaporator fan to carefully moderate circulating air, preventing cold spots and optimizing equal cooling. Consistent temperatures extend the shelf life of perishable goods. 

Causes of a faulty damper assembly can include failure of the plastic gears or axle that coordinate its movements over time. Improper air circulation disrupts the refrigerator's performance.

Symptoms include: 

• Formation of frost or ice buildup in problem areas  
• Inconsistent shelf temperatures from top to bottom
• Foods spoiling more quickly 

This replacement assembly from GE restores dependable temperature control. Upgrade today for continued fresh food preservation abilities matching OEM standards. It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This French-door refrigerator door gasket in Dorian Gray seals the fresh food door to the cabinet, helping keep cold air in, reduce moisture, and maintain stable temperatures for reliable food preservation.

• Creates a tight seal between the refrigerator compartment door and frame on French-door models
• Helps maintain correct internal temperature and reduce air leaks
• Replaces a torn, cracked, shrunken, or warped gasket
• Common symptoms: visible gaps or light around the door, door not sealing, condensation or frost at the door, or temperature fluctuations

• Disconnect power before servicing.
• Let the new gasket warm to room temperature; use warm water or low heat to relax any folds.
• Clean the door channel; seat the gasket corners first, then press the lip fully into the retainer all the way around.
• Close the door and check for even contact; use gentle heat to fine-tune the seal as needed.

This lower freezer basket restores safe, organized storage in the bottom compartment. Replace a bent or missing basket to keep food contained and maintain smooth access to items. What it does:

• Holds and organizes food in the lower freezer compartment
• Engages with existing rails or supports for easy access
• Replaces a cracked, bent, or missing basket to restore fit and function
• Helps prevent items from falling into gaps or interfering with movement

• 1 lower freezer basket

• Empty the area and fully access the lower compartment before removal
• Lift out the old basket; align the new basket on the side rails/supports and set into place
• Do not force; clear any ice buildup on rails/supports before installing
• Wear cut-resistant gloves to protect hands

Restore lost shelf space on your refrigerator door. This fresh food door bin replaces the lower bin, providing secure storage for bottles and condiments and snapping into the door tabs to keep items upright and accessible.

• Provides organized storage in the lower position of the fresh food door
• Attaches to molded door tabs for a secure, stable fit
• Replace if cracked or broken
• Helps prevent items from tipping or falling when the door opens and closes

• Disconnect power and remove items from the affected door area before starting
• Lift the old bin straight up and out of the door tabs
• Align the new bin with the tabs and press down evenly until fully seated—do not force
• Verify the bin is level and secure before reloading items

This is a grommet and it is intended for use on refrigerators and freezers. This is a genuine replacement part made by General Electric. A new grommet might be needed if the current one is visibly worn out or damaged in any way. If there are noises from vibration coming from the lower back area of the fridge there might be need for a new grommet. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with refrigerators and freezers, or units with a compressor and is made by General Electric.

The Stainless Steel Door Handle is an OEM part for GE refrigerators. It is the exterior handle located on the refrigerator and freezer doors that allow for easy opening and closing access.

Causes of a bad door handle can include damage, wear and tear over time that reduces functionality, or corrosion compromising the smooth operation and durable finish of the handle.

Symptoms of a failure include:

• Difficulty opening or closing the refrigerator doors  
• Loose, awkward, or improper movement of the handle
• Chipped paint, rusting, or deterioration of exterior surface
• Reduced aesthetic appeal detracting from overall appliance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This refrigerator meat drawer restores a clean, dedicated space for meats and deli items in the fresh food section. Replace a cracked or missing pan to regain smooth sliding, proper fit, and organized storage.

• Provides a dedicated storage area for meats and deli items in the fresh food compartment
• Slides on existing tracks/rails for easy access and proper seating
• Helps contain drips and spills to protect shelves below
• Typical symptoms: cracked or broken drawer, broken tabs, won't slide or seat correctly, falls off tracks, or missing drawer

• Remove contents and pull the existing drawer straight out; lift slightly to clear the rails
• Clean and inspect the tracks/rails before installing the new drawer
• Align the new drawer with the tracks and slide it in until fully seated—do not force
• Allow the new drawer to reach room temperature before installation; cold plastic can crack if flexed

Size: 10-32 GXTT FLP.595 S

The Ice Maker Fan Motor is an OEM part for GE refrigerators. It is a critical part of the automatic icemaker located inside the fresh food compartment. The fan motor works to rapidly freeze water into bullet-shaped cubes.

Symptoms of a failing fan motor include:

• Slow or ineffective ice production
• Leaks or water overflow from the icemaker assembly
• Strange noises coming from the icemaking area

Causes can be due to the motor brush wearing out over extended use, damage to the fan blade inhibiting spin, or failure of electronic motor components.

Replacing with this genuine GE fan motor restores timely ice harvests. It's compatible with Hotpoint, RCA, and Kenmore models to keep up with household demand for chilled refreshments.

This cam closure is the small pivot piece that helps the refrigerator fresh-food door close and stay aligned. Replacing a worn or broken cam restores smooth door movement and helps the door seal evenly to maintain cooling. What it does:

• Guides the fresh-food door cam so the door pivots and latches correctly.
• Helps correct sticking doors, doors that hang or bind, and uneven gaps that can let cold air escape.
• Replaces a worn, cracked, or broken closure that can cause misalignment or noisy door operation.

• Disconnect power or unplug the refrigerator before beginning any work.
• Remove the door or access trim per the manufacturer's instructions to reach the cam area; keep track of hinge pins and fasteners.
• Pry or pop out the old cam and press the replacement into the cam slot until it snaps into place; check door alignment and operation after installation.

The Manifold & Housing are OEM components specifically designed for GE refrigerators. This part includes both the manifold which distributes water and the outer housing that protects it. 

The manifold & housing work together to deliver filtered water to the refrigerator's dispenser and ice maker. It is responsible for efficiently directing water flow and ensuring reliable operation of components that require water. 

Symptoms of a bad manifold & housing include:

• Low water pressure at the dispenser 
• Streaking or staining around water line connections
• Ice maker or dispenser malfunctions due to lack of water
• Dripping or leaks from manifold or housing areas

This OEM GE part is specifically designed to fit your model fridge. It is also compatible with Hotpoint, RCA, and some Kenmore models for a factory fit and like-new performance.

The Evaporator Cover and Fan Assembly is an OEM part for GE refrigerators. It works to circulate cold air throughout the refrigerator and freezer compartments.

Causes of failure include damage or debris affecting fan rotation. Coil corrosion over time also impacts heat exchange performance.

Symptoms of issues are:

• Abnormally warm refrigerator temperatures
• Frost or ice accumulating inside
• Loud noises from the circulating fan
• Inefficient cooling needing frequent defrosting

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Slide Basket Lower Fz is an OEM part for GE freezers. This slide is responsible for smoothly gliding the freezer basket or drawer in and out, allowing for easy access and organization of frozen food items. It ensures that the freezer basket or drawer operates smoothly, making it effortless to retrieve items and maximize storage space.

A bad lower basket or drawer slide can occur due to wear and tear, damage, or other internal malfunctions. If you notice symptoms such as difficulty in sliding the freezer basket or drawer, sticking or jamming, or the basket or drawer not staying securely in place, it may be time to replace the slide.

Symptoms of a bad slide include:

• Difficulty in sliding the freezer basket or drawer
• Sticking or jamming of the basket or drawer
• Basket or drawer not staying securely in place

Restore organization to your GE freezer by replacing the faulty drawer slide with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

Specs: 8-18 AB IHW 5/8 S

This condenser fan mounting bracket secures the condenser fan motor and blade in the correct position to move air across the coils. Replacing a cracked or bent bracket restores stable mounting, reduces vibration, and helps maintain proper condenser airflow.

• Holds the condenser fan motor/blade assembly in alignment for proper airflow through the condenser
• Maintains clearance to prevent the fan blade from rubbing or contacting nearby components
• Helps reduce rattling, vibration, or scraping noises from the rear of the refrigerator
• Damage or misalignment can contribute to restricted condenser airflow and warmer temperatures

• Disconnect power and pull the refrigerator away from the wall to access the rear service area
• Remove the rear lower access panel; note wiring and hardware locations
• Support the fan motor/blade while removing the old bracket; transfer motor, blade, grommets, and screws to the new bracket
• The fan spins freely with proper clearance and correct airflow direction before reassembly