Gfe26jsmss Parts

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

The Switch Paddle Assembly is an OEM component specifically designed for GE side-by-side refrigerators. This assembly consists of the control switch and controls access for various refrigerator features and functions. 

Causes of a bad switch paddle assembly can include repeated use over time, unintended impacts, liquid spills inside the fridge, or damage to internal wiring/electronics. 

Symptoms of a bad switch paddle assembly include: 

• Faulty or unresponsive control switches  
• Lights or compartments not functioning properly
• The control panel displaying error codes
• Internal refrigerator components running unexpectedly

Replace this assembly to restore full functionality to your refrigerator’s control center. This genuine GE OEM part ensures dependable access to cooling, dispensing, and other common settings. It is compatible with Hotpoint, RCA, and some Kenmore models as well.

The Paddle and Skin Assembly is an OEM part for GE refrigerators. It circulates air directly around the refrigerator dispenser area, helping to prevent frost buildup and ensure cool dispensed water and ice. 

Issues like dispenser malfunctions, slow ice production, or frequent defrosting cycles can indicate an underlying issue with this assembly. Over time, excess frost or moisture exposure can damage components.

Causes of a bad dispenser paddle and skin assembly include worn or broken fan blades, cracks in the housing casing, or obstructed air channels.

Symptoms of a bad Paddle and Skin Assembly include: 

• Frost or moisture accumulation around the dispenser 
• Warm dispensed water/ice  
• Slow or inconsistent ice production
• Abnormal fan noises coming from the rear of the refrigerator

This OEM GE part is designed to directly replace the existing assembly and restore optimal airflow throughout the entire refrigerator. Replace yours today to prevent future dispenser issues.

8-18 CA HX 1/2 S

This wire freezer upper basket restores organized storage in the freezer upper compartment so frozen foods stay contained and easy to access. It replaces a missing or damaged upper basket to improve usable space and convenience. What it does:

• Provides a dedicated storage bin for frozen foods to keep items contained and organized
• Fits into the freezer's upper basket location to replace a cracked, bent, or missing basket
• Prevents items from falling through shelves or shifting during normal use
• Matches the OEM basket shape and mounting points for proper fit on compatible freezers

• Disconnect power to the appliance or unplug the refrigerator before servicing.
• Remove food and any nearby shelves or drawers, then install the basket into the existing supports or rails where the factory basket sat.
• Handle edges carefully and wear gloves if metal edges are sharp; do not force the basket into place.

This hinge cover screw fastens the hinge cover in place, helping keep it secure and protecting the hinge components beneath. Replace a missing or stripped screw to stop the cover from loosening or rattling.

• Secures the hinge cover to the door/cabinet hinge
• Helps protect hinge hardware and wiring under the cover
• Replaces stripped, rusted, or missing hardware
• Common symptoms: loose or missing hinge cover, vibration or rattling at the hinge area

• Disconnect power to the appliance before servicing near the hinge area
• Use the correct screwdriver; start threads by hand to avoid cross-threading
• Align the cover properly and tighten snugly—do not overtighten to prevent stripping
• Keep the door closed during work to minimize movement

This stand off is a small mounting spacer that secures and spaces internal components, restoring proper alignment and reducing panel movement or vibration for quieter, more reliable operation. What it does:

• Provides a solid mounting point to hold panels, brackets or wiring harnesses in place.
• Replaces broken, cracked or missing standoffs that allow components to shift or rub.
• Helps stop rattling, buzzing or misalignment caused by loose mounting points.
• Keeps proper clearance between parts to prevent wear or chafing over time.

• Disconnect power to the appliance before starting any repair.
• Remove the affected panel or access cover to reach the damaged standoff.
• Replace the old standoff with the new part; retain and reuse any existing screws or fasteners unless damaged.
• Hand-tighten mounting hardware and test the appliance; avoid overtightening plastic standoffs.

A replacement ice bucket that collects and stores cubes from the refrigerator ice maker, keeping ice contained and easy to access. Restores tidy ice storage and helps reduce spills and contamination. What it does

• Collects and holds ice produced by the ice maker so cubes stay contained and ready for dispensing or use.
• Positions ice for retrieval by the dispenser or auger assembly, helping prevent jams and misfeeds.
• Shields ice from freezer odors and contaminants while stored in the freezer.
• Replaces a cracked, warped or missing bucket that causes leaks, spills or poor ice handling.

• Always unplug the refrigerator or shut power off at the breaker before removing parts.
• Remove the old bucket by lifting or sliding it out per your model's service steps; align the replacement and slide or snap into place.
• Avoid forcing the bucket; inspect mounting rails and the ice maker area for obstructions before testing.
• After installation, restore power and run a short cycle or dispense a few cubes to confirm correct operation.

The Dispenser Drip Tray is an OEM replacement part for GE refrigerators designed to catch any drips or spills that may occur during the dispensing process, keeping your refrigerator clean and free from mess.

A bad dispenser drip tray can occur due to regular use or accidental damage. If you notice signs of wear, cracks, or if the tray is missing altogether, it may be time to replace it.

Symptoms of a bad dispenser drip tray:

• Drips or spills on the floor or surrounding surfaces
• Difficulty in cleaning or removing the tray
• Unhygienic conditions due to a damaged or missing tray

Restore your refrigerator by replacing the faulty dispenser drip tray with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This right-hand top hinge assembly secures and supports the refrigerator door at the cabinet top, restoring proper door alignment and smooth opening. It's a direct-fit replacement when the upper hinge is cracked, bent, or worn. What it does:

• Supports the upper corner of the door and maintains correct door alignment
• Helps the door open and close smoothly and stay level
• Prevents door sagging that can cause gaps, rubbing, or poor sealing
• Replaces damaged, bent, or broken top hinge hardware that can cause noisy operation

• Disconnect power to the appliance before starting and remove any items from the door
• Support or remove the door per manufacturer instructions before loosening hinge fasteners
• Use proper hand tools and tighten fasteners securely; check door alignment and gasket seal after installation

This ice box door assembly restores a damaged or worn freezer/ice compartment door so the compartment seals and cools correctly. It replaces the entire ice box door to help stop cold-air loss and protect stored frozen items. What it does:

• Replaces a cracked, dented or broken ice box/freezer door
• Restores a proper seal to reduce frost buildup and temperature fluctuations
• Helps stop cold air from escaping, improving cooling performance
• Prevents food from being exposed to warm air and moisture

• Disconnect power to the appliance before starting any repair.
• Remove all contents from the compartment and support the door during removal and installation.
• Installation requires basic hand tools; handle glass or painted surfaces carefully to avoid damage.
• If seals or mounting hardware are worn, inspect and replace separately for best performance.

The Evaporator Cover and Fan is an OEM replacement part for GE refrigerators responsible for maintaining proper airflow and temperature regulation within the refrigerator's freezer compartment. The fan helps distribute the cold air while the cover protects the evaporator coils from any damage or obstruction.

A bad evaporator cover and fan can occur due to wear and tear, damage, or component failure over time. If you notice symptoms such as inconsistent cooling, excessive frost or ice buildup, or unusual noises coming from the freezer, it may indicate a need to replace the evaporator cover and fan.

Symptoms of a bad evaporator cover and fan include:

• Inconsistent cooling
• Excessive frost or ice buildup
• Unusual noises coming from the freezer

Restore your refrigerator by replacing the faulty evaporator cover and fan with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Lower Cabinet Harness is an OEM replacement part for GE refrigerators responsible for providing electrical connections between various components within the lower cabinet of the refrigerator.

A bad lower cabinet harness can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as intermittent or complete loss of power to components within the lower cabinet, flickering lights, or malfunctioning controls, it may indicate a need to replace the wiring harness.

Symptoms of a bad lower cabinet harness include:

• Intermittent or complete loss of power to components within the lower cabinet
• Flickering lights or erratic behavior
• Malfunctioning controls or display

Restore your refrigerator by replacing the faulty lower cabinet harness with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This LED light board assembly provides the replacement LED module that illuminates the control/display area. Restores visibility of panel indicators and display lighting for proper operation and ease of use. What it does:

• Replaces the LED light module that backlights the control/display area and status indicators.
• Restores faded or non-lit control panel lighting that makes buttons and icons hard to see.
• Can resolve intermittent or no-light symptoms caused by a failed LED board.
• Works with the original housing and connectors for a direct-fit replacement.

• One LED light board assembly as shown

• Disconnect power to the appliance before starting any repair to avoid shock.
• Handle the board by edges; avoid touching LED lenses or circuitry to prevent damage.
• Verify connector orientation and seating; secure mounting screws to prevent rattle.

This leveling screw threads into the refrigerator's leveling leg or adjuster bracket to raise or lower the cabinet. Replacing a stripped or missing screw restores stable footing and helps keep doors aligned for proper sealing.

• Provides threaded height adjustment of the leveling leg/roller bracket
• Helps stop rocking or wobbling that can cause vibration and rattling
• Aids in door alignment so doors close and seal properly
• Replace if threads are stripped, screw is bent, seized, or missing

• Disconnect power and turn off the water supply before servicing
• Protect flooring; with assistance, carefully tip the appliance slightly to relieve weight from the adjuster
• Remove the damaged screw; hand-start the new screw to avoid cross-threading, then adjust until level
• Verify the cabinet is stable and doors operate correctly before restoring power

This spring duct door is a replacement spring that helps the duct/vent door open and close properly, restoring correct airflow control and reducing unwanted drafts. What it does:

• Provides tension to the vent/duct door so it opens and closes reliably
• Helps prevent the door from sticking open or closed, improving airflow performance
• Restores proper damper action that keeps unwanted drafts and moisture out when the appliance is idle
• Supports normal operation of the vent/duct assembly without modifying other components

• Designed to install in the duct/vent door assembly; follow the appliance service manual for access steps
• Disconnect power (and gas if applicable) and ensure the appliance is cool before servicing
• Use proper tools and retain all fasteners; verify correct spring orientation before reassembly