Gfe26jsmss Parts

This 12-24 screw secures brackets, panels, and other hardware in GE refrigerator assemblies. Replacing a stripped or missing fastener restores a tight, rattle-free fit and helps keep doors, handles, and internal components properly aligned.

• Fastens components where a #12-24 screw is specified
• Replaces damaged, stripped, corroded, or missing hardware
• Helps resolve loose handles/panels, vibration noises, or minor misalignment caused by missing screws
• OEM-grade hardware for a precise fit in the designated locations

• Disconnect power; turn off water supply if working near water lines
• Match the new screw to the original; start threads by hand to avoid cross-threading
• Support the part being secured (door/handle/panel) during removal and installation
• Use the correct driver/bit that matches the screw head; tighten snugly without overtightening

This evaporator wire harness delivers power and control signals to the evaporator fan and defrost components. Replace a damaged harness to restore stable cooling and dependable automatic defrost performance. What it does:

• Provides plug-in electrical connections for evaporator-compartment components
• Carries power and control signals for cooling and defrost cycles
• Enables proper airflow across the evaporator and effective frost removal
• Common clues of a failing harness: heavy frost on the back wall, evaporator fan not running, intermittent cooling, or burned/brittle wires or connectors

• 1 evaporator wire harness assembly

• Disconnect power to the refrigerator before servicing
• Access the harness behind the freezer/evaporator cover; remove drawers/shelves and the rear panel
• If iced over, allow ice to melt—do not use sharp tools on coils or wiring
• Route and secure the new harness exactly like the original; fully seat each connector

The Door Closure Spring is an OEM replacement part for GE refrigerators. This spring ensures that the refrigerator door closes securely and maintains a tight seal, preserving the freshness of your food and preventing energy loss. The door closure spring provides the necessary tension to keep the refrigerator door properly aligned and closed. It helps to prevent air leaks and maintain consistent temperature levels inside the refrigerator.

A bad door closure spring can occur due to wear and tear over time or accidental damage. If you notice symptoms such as a loose or sagging refrigerator door, difficulty in keeping the door closed, or a compromised seal, it may be time to replace the door closure spring.

Symptoms of a bad door closure spring include:

• Loose or sagging refrigerator door
• Difficulty in keeping the door closed
• Compromised seal resulting in temperature fluctuations

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This duct door assembly replaces the vent door that covers the dryer exhaust opening, helping direct airflow and keeping the vent closed when the dryer is off. Restores proper vent sealing and prevents drafts or pests. What it does:

• Replaces a broken, bent or stuck vent door that won't open or close smoothly
• Helps ensure exhaust air exits the dryer housing instead of leaking into the cabinet
• Reduces drafts and keeps out dust or small pests when the dryer is idle
• Stops rattling caused by a loose or damaged duct door

• Disconnect power (and gas supply if applicable) before servicing the appliance.
• Access may require removing the dryer's rear or top panel—keep track of fasteners.
• Handle trim and door edges carefully to avoid bending; align hinges before tightening.

This control display is the stainless-steel front panel and user interface assembly that lets you set and view oven or cooktop functions. It restores a visible, responsive control surface for accurate temperature and function selection. What it does:

• Houses the touchpads/buttons and display used to select cooking modes, set temperatures, and start/stop cycles
• Replaces a cracked, faded, or unresponsive control surface to regain clear display and reliable button input
• Helps address symptoms like blank or unreadable display characters, non-responsive buttons, or cosmetic damage to the control face
• Interfaces with the appliance's control electronics to show status, time, and error indicators

• One stainless-steel control display assembly

• High-level replacement; disconnect power at the breaker before beginning to avoid shock
• Handle display by edges to avoid fingerprints or scratching stainless finish
• Depending on model, panel may attach with screws or clips and connect to wiring harness—do not force connectors

This condenser fan and housing assembly circulates air across the condenser coils to help your refrigerator dissipate heat and run efficiently. Replaces a damaged or worn housing and fan to restore proper airflow and cooling performance. What it does

• Moves air over condenser coils so the compressor can shed heat and maintain cooling
• Prevents overheating and helps the system run more efficiently
• Can stop loud fan noise, rattling, or reduced cooling when the fan or housing is damaged
• Restores correct airflow when the original housing is cracked, bent, or obstructed

• One condenser fan and housing assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing rear or bottom access panels; keep track of fasteners
• Handle sheet metal edges and fan blades carefully to avoid cuts and damage
• After installation, verify fan spins freely and recheck connections; confirm proper cooling

This steel pin hinge secures and pivots the appliance door, restoring proper alignment and smooth opening/closing. Durable metal construction replaces worn or bent hinges to help maintain a consistent door seal and fit. What it does:

• Provides the pivot point that allows the door to swing open and closed
• Restores proper door alignment and prevents sagging or uneven gaps
• Helps the door close fully to maintain appliance temperature and efficiency
• Replaces corroded, bent, or broken hinge pins that cause noisy or stiff operation

• Unplug the appliance or disconnect power before starting work; for refrigerators also turn off water if applicable
• Support the door when removing the old hinge to prevent injury or damage
• Use basic hand tools;

This top LED cover is the replacement light lens that protects and diffuses the refrigerator's top LED assembly for even interior lighting and a finished look. Replaces a cracked, yellowed, or missing lens to restore light distribution. What it does:

• Protects the LED module from dust, moisture, and impacts
• Diffuses and softens LED output for even interior illumination
• Prevents glare and visible hot spots from exposed LEDs
• Helps maintain a clean, finished appearance inside the appliance
• Can address symptoms like uneven lighting, visible LED bulbs, or a cracked/warped lens

• Disconnect power to the appliance before starting any work.
• Handle the lens gently to avoid scratching or cracking; wear gloves if needed.
• Removal/installation typically involves releasing retaining clips or removing a few screws—retain fasteners for reuse.
• Align the cover over the LED assembly and secure until it snaps or fasteners are tightened; test lighting after restoring power.

This stop door closes the refrigerator dispenser opening to help keep cold air in and protect the dispenser area from debris. Replacing a damaged stop door restores proper sealing and smooth dispenser operation. What it does:

• Seals the dispenser opening when not in use to reduce cold-air loss
• Helps prevent debris and pests from entering the dispenser chute
• Works with the dispenser actuator/lever to open and close the door during dispensing
• A worn or broken stop door can cause visible gaps, drafts, or debris falling into the dispenser

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser bezel or inner liner panels
• Handle the door carefully to avoid scratching or breaking the mounting tabs
• Verify proper alignment and actuator engagement before reassembling

This port gasket seals the port opening to prevent air and moisture exchange and help maintain proper refrigerator/freezer temperatures. Durable material provides a tight seal to support efficient cooling and help reduce frost buildup. What it does

• Forms a protective seal around the port to reduce air leaks and moisture intrusion
• Helps maintain consistent internal temperatures and can reduce frost accumulation near the port
• Minimizes energy loss caused by gaps or worn seals
• Supports proper operation of components behind the port by keeping the area sealed

• Disconnect power to the appliance before inspecting or replacing the gasket
• Remove the old gasket carefully to avoid damaging surrounding trim or components
• Align the replacement gasket and press into place; ensure a continuous, even seal

This air tower assembly directs and channels cold air inside the fresh-food compartment to help maintain even cooling and proper airflow. It replaces a damaged or cracked duct that can cause uneven temperatures. What it does

• Routes conditioned air from the evaporator into the fresh-food section for consistent cooling.
• Helps prevent warm spots and reduces localized thawing or food spoilage.
• Restores proper airflow if existing tower is cracked, broken, or blocked.
• Can reduce frost build-up caused by disrupted airflow pathways.

• Disconnect power before starting any service to avoid electrical shock.
• Remove interior shelves and panels as needed for access; handle plastic parts gently to avoid cracking.
• Inspect surrounding seals and ducts during replacement; secure with factory fasteners only.

This drawer bracket secures and supports a refrigerator drawer, restoring proper alignment and smooth operation. Replace a broken or cracked bracket to prevent sagging drawers and ensure contents slide correctly. What it does:

• Supports the drawer assembly and keeps the drawer level during opening and closing
• Restores proper drawer alignment when original bracket is cracked or damaged
• Prevents drawer sagging or binding that can catch or stick
• Helps maintain smooth sliding and proper engagement with the drawer track

• One drawer bracket

• Designed for direct replacement; remove drawer and any trim to access mounting location
• Compare the part to the original before installation to confirm orientation and screw hole alignment
• Use appropriate hand tools; do not force the bracket to avoid cracking adjacent plastic parts
• Disconnect power only if accessing components where electrical parts could be disturbed