Gfe28ggkjww Parts

This right-hand slide bracket assembly replaces the damaged or worn guide that supports a refrigerator/freezer drawer, restoring smooth, stable opening and closing. It mounts on the cabinet side to guide the drawer slide. What it does:

• Provides the right-side support and track for a drawer slide to engage and move smoothly
• Prevents the drawer from binding, tilting, or falling out when opening or closing
• Restores proper alignment for even drawer operation
• Helps eliminate scraping, sticking, or noisy drawer movement

• Remove all contents from the drawer and open to access the bracket before starting
• Basic hand tools (screwdriver or nut driver) are typically required; keep screws and fasteners from the old bracket for reuse if undamaged
• Disconnect power or follow appliance-specific safety procedures before working near electrical components

This diverter and badge assembly replaces the dispenser diverter on compatible refrigerators, restoring proper flow direction and the finished exterior badge for the dispenser area. It helps stop leaks and stabilizes the dispenser trim. What it does:

• Directs dispenser water/ice flow through the correct outlet to prevent misdirected dispensing
• Secures the dispenser badge/trim to the appliance front for a finished appearance
• Helps stop leaks or drips caused by a damaged or worn diverter
• Reduces wobble or looseness at the dispenser face when the badge/clamp is intact

• One diverter & badge assembly

• Disconnect power (and water supply if applicable) before beginning work
• Access may require removing the dispenser bezel or door trim—follow your model's service instructions
• Handle plastic components gently to avoid cracking; replace any damaged fasteners or seals

The Basket Bottom Asm is an OEM part for GE refrigerators. This assembly is specifically designed to fit in the bottom freezer compartment, providing a convenient and organized storage solution for your frozen foods.

A bad bottom freezer basket assembly can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as broken wires, a loose fit, or difficulty in sliding the basket, it may be time to replace it with a new one.

Symptoms of a bad bottom freezer basket assembly include:

• Broken wires
• Loose fit in the freezer compartment
• Difficulty in sliding the basket in and out

Improve your freezer storage and organization by replacing the faulty bottom freezer basket assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This left-side vegetable pan is the replacement food-storage tray that holds produce and fits into the refrigerator crisper area for organized storage. It restores proper support and containment for fruits and vegetables. What it does:

• Provides a stable tray for storing fruits and vegetables in the crisper compartment
• Replaces cracked, warped, or broken pans that can let produce sit unevenly or fall through
• Helps keep items contained and easier to organize when the drawer is removed
• Works with the refrigerator's crisper assembly to maintain normal storage function

• One left-side vegetable pan

• Remove food and any loose components before installing to avoid damage or injury
• Slide the pan into the left crisper slot until it seats; ensure proper alignment with drawer rails
• Handle glass or plastic panels carefully to avoid chips or cracks

This sound-deadening mastic helps quiet refrigerator operation by damping vibration on components and panels. Replace deteriorated or missing mastic to reduce rattles, buzzing, and metal-to-metal contact for smoother, quieter performance. What it does:

• Damps vibration between sealed-system tubing, compressor mounts, and cabinet surfaces
• Helps reduce humming, rattling, or buzzing noises from the rear/bottom of the unit
• Replaces hardened, cracked, or fallen-off mastic
• Helps prevent metal-to-metal contact that can amplify noise

• Sound-deadening mastic

• Unplug the appliance before accessing the rear compartment
• Remove old material and clean surfaces; ensure they are dry before applying the mastic
• Press firmly to secure; do not obstruct fans, vents, or moving parts
• Avoid stressing or puncturing sealed-system tubing;

This arc handle assembly replaces a broken or cracked refrigerator door pull to restore a secure grip and the door's finished appearance. It installs where the original arc-style handle mounts on the fresh food or freezer door. What it does:

• Replaces a damaged or loose arc-style door handle to restore normal door opening and closing
• Provides a comfortable handhold and helps maintain door alignment when pulling
• Restores the appliance's exterior look when the original handle is chipped, cracked, or worn
• Matches OEM fit and mounting points for a straightforward replacement when compatible

• One arc handle assembly (handles, mounting hardware)

• Disconnect power or follow manufacturer safety guidance for your model before working near the door hinge area
• Use basic hand tools; remove door trim or access caps if applicable to reach mounting screws
• Save all original screws/fasteners unless new hardware is explicitly listed as included

A rubber tubing grommet that fits a factory hole to protect and cushion refrigerant/water tubing and help prevent chafing or leaks. Simple, durable replacement that restores a sealed pass-through for tubing. What it does:

• Cushions and protects tubing where it passes through sheet metal or plastic openings
• Helps prevent chafing, rubbing and premature tubing wear
• Provides a cleaner, more secure tubing pass-through to reduce leak risk
• Commonly used on water lines, refrigerant lines or small-diameter tubing in appliances

• One tubing grommet

• Disconnect power and water supply before servicing the appliance
• Remove access panels as needed to reach the tubing hole; press-fit the grommet into the opening and route tubing through the slit
• Replace grommet if cracked, torn or excessively worn; ensure tubing is properly seated in the grommet
• Do not use sharp tools that could damage the grommet or tubing during installation

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

This screw hinge center adjuster is a replacement hinge screw that helps align and secure the appliance door for smooth opening and a proper seal. Designed to restore correct door positioning and prevent sagging or uneven gaps. What it does:

• Replaces the center hinge screw/adjuster used in the door hinge assembly
• Helps realign the door to correct sagging, uneven gaps, or misalignment
• Secures hinge parts to maintain stable door movement and a tight seal
• Compatible with common symptom: door rubbing, dragging, or not closing evenly

• One screw hinge center adjuster

• Basic hand tools required; support the door during removal and installation
• Follow manufacturer service manual steps for hinge removal and door alignment
• Keep fasteners snug but avoid over-tightening to prevent stripping
• Turn off power to powered doors/controls and work with care around edges

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety

This wheel overmold assembly replaces a worn front wheel to restore smooth drum rotation and reduce noise. It mounts to the dryer front support to help the drum roll evenly and prevent metal-on-metal wear. What it does:

• Provides a cushioned wheel surface that supports the dryer drum and improves rotation
• Reduces squeaking, scraping and grinding caused by a worn or damaged front wheel
• Helps maintain proper drum alignment for even tumbling and reduced wear on seals
• Extends the life of the front support by preventing direct metal contact

• Disconnect power before beginning repair to avoid electrical hazard
• Access the front support assembly per your dryer's service instructions; inspect adjacent rollers and glides for wear
• Fit the overmold onto the wheel hub and secure per OEM guidance; verify smooth drum rotation before reassembly
• If other support components show wear, replace them to prevent premature failure

The Door Light Switch is an OEM part for GE refrigerators. It is designed to control the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed.

Causes of a bad door light switch can include wear and tear over time, electrical malfunctions, or physical damage from regular use. A faulty switch can lead to improper functioning of the refrigerator light, impacting visibility inside the unit.

Symptoms of a bad Door Light Switch include:

• Refrigerator light not turning on or off correctly
• Light flickering or remaining dim
• Light staying on even when the door is closed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Cover Latch is an OEM part for GE refrigerators. This part serves as a cover for the latch handle, ensuring a seamless look for the appliance while protecting the latch handle from damage and wear.

Causes of a bad Cover Latch can include wear and tear over time, impact or mishandling that leads to cracks or breaks, or general deterioration due to prolonged use.  

Symptoms of a bad Cover Latch include:

• Visible cracks or breaks
• The latch handle not being properly covered
• Difficulty in operating the latch handle
• Loose or missing cover latch

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.