Gfe28gynefs Parts

This refrigerator shelf assembly provides a sturdy, easy-to-clean surface for storing food and containers. Restores proper shelf support and organization so items sit level and slide smoothly for access. What it does:

• Replaces a cracked, chipped, or missing shelf to restore usable storage space
• Supports food containers and helps keep stored items organized and stable
• Front trim helps retain items and provides a finished appearance
• Fits into existing shelf tracks or support ledges for secure placement

• One shelf assembly

• Unplug the refrigerator or disconnect power before servicing to avoid shock
• Remove food and any items from adjacent shelves before installing
• Slide the shelf into the existing tracks or seat it on the shelf supports until fully seated
• If glass is broken, wear protective gloves and eye protection when removing the old shelf

This left-side freezer holder slide secures and guides the freezer drawer for smooth opening and closing. Replacing a worn or broken slide restores proper drawer alignment and helps prevent sagging or sticking. What it does:

• Supports the freezer drawer on the left side and keeps it aligned during use
• Guides drawer movement for smooth opening and closing
• Replaces damaged, bent, or missing slides that cause binding or uneven drawer travel
• Helps prevent the drawer from sagging, slipping, or coming off its track

• Disconnect power before servicing to avoid electrical hazards
• Remove freezer contents and a drawer or panel as needed for access
• Compare the old slide to ensure correct left/right orientation before installing
• Use basic hand tools; do not force parts—replace any damaged mounting hardware

This silicon controlled rectifier (SCR) switches and regulates power to heating or motor circuits, helping the appliance control temperature and run cycles reliably. It's a direct-fit electronic switching component used in a variety of control systems. What it does:

• Acts as an electronic switch to regulate AC power to heating elements or motors
• Helps control temperature output and maintain consistent cycle performance
• Can prevent unwanted continuous current flow when functioning properly
• Commonly replaced when ovens, ranges, or dryers fail to heat or cycle correctly

• One silicon controlled rectifier (SCR) as shown

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the SCR by its body; avoid touching terminals and static-sensitive areas
• Verify proper orientation and secure mounting; follow OEM wiring and torque practices

This PEX water line provides a flexible, durable water supply connection for compatible appliances, restoring proper water delivery for dispensers and ice makers. It resists kinking and corrosion for reliable flow. What it does:

• Carries potable water from the household supply to the appliance water valve or dispenser.
• Restores water flow when the original line is cracked, pinholed, or damaged.
• Helps prevent leaks compared with brittle or corroded rigid tubing.
• Supports normal dispenser and ice maker operation when installed correctly.

• One PEX water line.

• Turn off and disconnect the water supply and power before starting work.
• Drain remaining water from the line and fittings to avoid spills.
• Use the correct fittings and follow manufacturer torque recommendations; hand-tighten then final snug with wrench.
• After installation, slowly restore water, check all connections for leaks, and test dispenser/ice maker operation.

This right-hand slide bracket assembly replaces the damaged or worn guide that supports a refrigerator/freezer drawer, restoring smooth, stable opening and closing. It mounts on the cabinet side to guide the drawer slide. What it does:

• Provides the right-side support and track for a drawer slide to engage and move smoothly
• Prevents the drawer from binding, tilting, or falling out when opening or closing
• Restores proper alignment for even drawer operation
• Helps eliminate scraping, sticking, or noisy drawer movement

• Remove all contents from the drawer and open to access the bracket before starting
• Basic hand tools (screwdriver or nut driver) are typically required; keep screws and fasteners from the old bracket for reuse if undamaged
• Disconnect power or follow appliance-specific safety procedures before working near electrical components

This left-side vegetable pan is the replacement food-storage tray that holds produce and fits into the refrigerator crisper area for organized storage. It restores proper support and containment for fruits and vegetables. What it does:

• Provides a stable tray for storing fruits and vegetables in the crisper compartment
• Replaces cracked, warped, or broken pans that can let produce sit unevenly or fall through
• Helps keep items contained and easier to organize when the drawer is removed
• Works with the refrigerator's crisper assembly to maintain normal storage function

• One left-side vegetable pan

• Remove food and any loose components before installing to avoid damage or injury
• Slide the pan into the left crisper slot until it seats; ensure proper alignment with drawer rails
• Handle glass or plastic panels carefully to avoid chips or cracks

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

This sound-deadening mastic helps quiet refrigerator operation by damping vibration on components and panels. Replace deteriorated or missing mastic to reduce rattles, buzzing, and metal-to-metal contact for smoother, quieter performance. What it does:

• Damps vibration between sealed-system tubing, compressor mounts, and cabinet surfaces
• Helps reduce humming, rattling, or buzzing noises from the rear/bottom of the unit
• Replaces hardened, cracked, or fallen-off mastic
• Helps prevent metal-to-metal contact that can amplify noise

• Sound-deadening mastic

• Unplug the appliance before accessing the rear compartment
• Remove old material and clean surfaces; ensure they are dry before applying the mastic
• Press firmly to secure; do not obstruct fans, vents, or moving parts
• Avoid stressing or puncturing sealed-system tubing;

This case corner cap is a molded corner cover that restores the finished appearance of a refrigerator cabinet and protects edges from dings and wear. It replaces a cracked, chipped or missing corner and helps keep cabinet panels aligned. What it does

• Covers and protects the cabinet/door corner from impact damage and wear
• Restores a uniform finished appearance for cosmetic repair
• Helps maintain panel alignment at the corner to reduce gaps and rubbing
• Commonly replaced when the corner is cracked, broken, loose or missing

• Disconnect power and remove food from the area before starting repairs.
• Remove any trim or fasteners securing the old cap; install the replacement by snapping or fastening into place as designed.
• Avoid forcing the cap; ensure clips or tabs align to prevent damage.
• If clips or underlying trim are damaged, replace those parts as needed for a secure fit.

This M6-1.0 screw secures appliance components where a metric fastener is required, restoring proper fit and reducing movement or noise. Use it to replace a missing or stripped fastener for stable panel and bracket attachment. What it does:

• Replaces a lost or damaged M6 fastener to restore secure connections
• Prevents panels, brackets, or assemblies from vibrating or shifting
• Helps eliminate rattling or misalignment caused by a missing screw
• Matches the OEM fit where an M6-1.0 × 16mm fastener is specified

• One M6-1.0 screw (16mm length)

• Disconnect power and follow all appliance safety precautions before servicing
• Use the correct metric driver or hex key to avoid stripping the head
• Tighten to snug only; avoid overtightening which can strip threads or damage parts
• Replace only with the identical OEM part number for proper fit and function

This left-hand door closure replaces the left hinge/closure assembly that helps the refrigerator door latch and close smoothly, restoring proper door alignment and seal for consistent cooling performance. What it does

• Guides and secures the left refrigerator door during closing to help maintain a tight seal.
• Helps prevent door sagging, misalignment, and gaps that can cause warm air leaks or frost buildup.
• Restores smooth, predictable door movement and reliable latching.
• Works with existing hinge components; designed as a direct-fit OEM replacement.

• One left-hand door closure assembly.

• Disconnect power to the appliance before beginning work and remove all food from door shelves if necessary.
• Typical install requires removing the door from the hinge, swapping the closure assembly, then realigning and reinstalling the door.
• Use proper hand tools; avoid forcing parts to prevent damage to the door or hinge.

This center hinge (right) is the replacement pivot that supports and aligns the refrigerator door at the middle hinge point, helping restore smooth door movement and proper door alignment for reliable closing. What it does:

• Supports the mid-section of the refrigerator door and provides the pivot point for opening and closing.
• Restores correct door alignment to help the door seal and close more consistently.
• Replaces worn or damaged hinge hardware that can cause door sag, rubbing, or uneven gaps.
• Helps stop noisy or binding door movement when the existing hinge is bent, loose, or worn.

• Always support the door before removing any hinge hardware to prevent the door from falling or shifting.
• Remove the top/center hinge fasteners in sequence; retain or replace original screws and pins as required.
• Use basic hand tools; avoid overtightening fasteners which can restrict hinge movement.

This left-side center hinge secures and pivots the refrigerator door at the middle hinge location, restoring proper door alignment and smooth opening. It replaces a bent or worn center hinge to help maintain an even door gap and seal. What it does:

• Provides the pivot point for the refrigerator door at the center hinge location
• Restores correct door alignment when hinge is bent, worn, or broken
• Helps prevent uneven door gaps that can lead to poor sealing or cold loss
• Enables smooth opening and closing of the door by stabilizing movement

• Disconnect power and empty door shelves before starting; follow manufacturer instructions
• Support the door while removing or installing the hinge to avoid dropping or damaging the door
• Use appropriate hand tools; do not overtighten fasteners which can restrict door movement

A rubber tubing grommet that fits a factory hole to protect and cushion refrigerant/water tubing and help prevent chafing or leaks. Simple, durable replacement that restores a sealed pass-through for tubing. What it does:

• Cushions and protects tubing where it passes through sheet metal or plastic openings
• Helps prevent chafing, rubbing and premature tubing wear
• Provides a cleaner, more secure tubing pass-through to reduce leak risk
• Commonly used on water lines, refrigerant lines or small-diameter tubing in appliances

• One tubing grommet

• Disconnect power and water supply before servicing the appliance
• Remove access panels as needed to reach the tubing hole; press-fit the grommet into the opening and route tubing through the slit
• Replace grommet if cracked, torn or excessively worn; ensure tubing is properly seated in the grommet
• Do not use sharp tools that could damage the grommet or tubing during installation

This middle door cover is the molded interior trim piece that restores the refrigerator door's appearance and protects internal components and insulation. Replacing a damaged cover improves fit and looks without changing door function. What it does:

• Covers and protects internal door cavities, wiring and insulation behind the middle section
• Restores a secure mounting surface for door bins and shelves
• Replaces cracked, warped or cosmetically damaged trim that allows gaps or loose fittings
• Helps maintain a proper door seal by ensuring correct bin/shelf alignment

• One middle door cover (dark gray)

• Disconnect power to the appliance before servicing
• Remove door bins/shelves and any fasteners that secure the cover; keep hardware for reuse
• Align tabs and screw holes, then install using the original fasteners; do not force the part into place