Ghs1854xps-4 Parts

This interior light shield protects and diffuses the refrigerator light, helping produce even illumination while covering the bulb. It restores a finished look and prevents direct contact with the lamp for safer operation. What it does:

• Covers the interior light to diffuse and soften illumination for better visibility
• Protects the bulb from accidental impact and food contact
• Helps prevent direct glare from the lamp
• Replaces cracked, yellowed, missing, or loose light covers that reduce light output

• Disconnect power before servicing the appliance to avoid shock
• Handle the plastic shield carefully to avoid cracking during removal/installation
• Usually snaps or screws into place; align tabs with housing and press gently

This molded water reservoir stores and directs water for the refrigerator's dispenser and ice system, restoring normal water flow and reducing leaks when the original tank is cracked or damaged. Fits specific Frigidaire refrigerator configurations. What it does:

• Holds and routes water from the household supply to the dispenser and ice maker
• Replaces a cracked, warped, or leaking reservoir that causes pooling or loss of water flow
• Restores proper water pressure to downstream valves and components when the tank is compromised
• Helps prevent contaminants from entering the dispenser system when installed intact

• One water tank (reservoir) as shown

• Disconnect power and shut off the water supply before starting work
• Drain any remaining water from lines and the old tank to avoid spills
• Handle the tank carefully to avoid damaging fittings; replace any worn gaskets or clips as needed

This tube clamp secures small tubing and lines inside the appliance to prevent movement and reduce wear. It keeps hoses and tubes routed properly so they don't rub against sharp edges or vibrate during operation. What it does:

• Holds water, drain or refrigerant tubing in place to prevent sagging and chafing
• Reduces vibration and rattling from loose lines
• Helps prevent tubing wear that can lead to leaks or pinch damage
• Keeps hoses routed neatly for reliable appliance operation

• Disconnect power and shut off water supply before beginning any repair
• Remove any access panels needed to reach the clamp location; use caution around sharp sheet metal
• Replace only the damaged clamp with the same style and secure tubing firmly but without over-tightening
• If tubing shows damage where it was rubbing, replace or repair the tubing before reinstalling the clamp

This mechanical refrigerator thermostat regulates interior temperature, letting the compressor cycle on and off to maintain your set cooling level. It's a direct replacement for worn or unresponsive temperature controls to restore consistent cooling. What it does:

• Senses cabinet temperature and signals the compressor to run or stop to maintain setpoint
• Replaces a thermostat that won't hold temperature, causes continuous running, or prevents cooling
• Works with manual temperature-control knobs (mechanical sensing and switching)
• Typical failure symptoms: refrigerator too warm, too cold, or compressor that runs constantly or not at all

• Disconnect power before attempting any service to avoid shock or damage
• Access may require removing control panels or shelves; keep track of mounting screws and orientation
• Confirm wiring and terminal placement match the old thermostat before final connection

This water inlet tube supplies water from the refrigerator's supply to the dispenser and ice maker, restoring proper flow and preventing routing issues. It's a direct-fit replacement that helps stop leaks and restore water delivery. What it does:

• Directs water from the house supply to the refrigerator's internal water system.
• Restores water flow to the dispenser and ice maker when a damaged tube is blocking supply.
• Prevents leaks and water pooling caused by cracked, pinched, or corroded inlet tubing.
• Works with other inlet fittings and valves to maintain proper water routing.

• Shut off the refrigerator power and water supply before starting any work.
• Remove access panels as needed and relieve any residual water pressure in the line.
• Use proper tubing connectors and tighten fittings to manufacturer torque—inspect for leaks after restoring water.
• If you find additional damaged fittings or clamps, replace them to ensure a leak-free install.

This label module cover is a replacement outer cover that protects the control module label and front-top trim area while restoring a clean, finished appearance. It fits over the module opening and matches white appliance trim. What it does:

• Protects the control module label and underlying components from dirt and accidental contact
• Restores a clean, undamaged appearance when the original cover is cracked, faded, or missing
• Keeps important model/serial/label information visible and secure
• Helps prevent loose wires or small debris from contacting the module area

• One label module cover (white), as shown

• Disconnect power to the appliance before starting any work
• Typically installs by snapping into the control-module opening or fastening with screws—retain any original fasteners
• Handle carefully to avoid cracking the new plastic during alignment