Ghws3605frr-Flwasher Parts

This guide pin bushing cushions and aligns a rotating guide pin, helping the appliance drum or assembly run smoothly and quietly. Replaces worn bushings to reduce noise and prevent pin-to-housing wear. What it does

• Provides a low-friction bearing surface for a guide pin or shaft.
• Keeps the pin centered to prevent wobble and misalignment during operation.
• Reduces noise and metal-on-metal wear caused by a worn or damaged bushing.
• Helps maintain proper movement of the drum/assembly for consistent performance.

• One guide pin bushing.

• Disconnect power before beginning any repair to avoid shock or injury.
• Access may require removing panels, the drum or related assemblies; follow service manual steps.
• Inspect surrounding parts (pin, housing, clips) and replace any damaged components.
• Use appropriate tools and avoid forcing the bushing into place; follow the OEM service instructions for torque/spec guidance.

This guide drain hose directs defrost and condensate water from the evaporator area to the refrigerator drain, helping prevent water pooling and soft-food leaks inside the cabinet. It's a simple replacement to restore proper drainage. What it does:

• Routes defrost and condensate water to the drain pan or outlet
• Helps keep the internal drain path clear and reduces overflow risk
• Positions and secures the drain hose to prevent kinks or pinching
• Supports consistent drainage after defrost cycles

• Disconnect power to the appliance before beginning any work
• Access may require removing interior panels or rear cover depending on model
• Route the hose as shown in the service diagram and secure it in the guide to avoid kinks
• Check for proper drainage and leaks after reassembly

This knob retainer secures a control knob to its switch/timer shaft, keeping your selections engaged and the knob firmly in place. Replace a worn or missing retainer to restore a solid feel and dependable operation.

• Holds the control knob securely on the switch/timer shaft
• Restores positive engagement when turning the knob
• Common fix for a loose, slipping, wobbly, or falling-off knob
• Helps resolve intermittent selection when the knob doesn't grip the shaft

• Disconnect power before servicing
• Pull off the knob to access the retainer
• Align the new retainer with the shaft and press firmly until fully seated
• Reinstall the dial/knob and verify proper engagement

This cap secures a refrigerator water filter in its housing and helps maintain a watertight connection. It keeps the filter seated so water flows through the filter instead of around it, reducing leaks and poor dispensing. What it does:

• Secures the water filter cartridge in the housing so it stays properly seated
• Forms a seal at the filter opening to prevent water leaks
• Directs filtered water into the dispenser/ice system when installed correctly
• A cracked, warped, or missing cap can cause leaks, loose filter fit, or reduced dispensing performance

• Turn off the water supply and dispense water to relieve pressure before servicing
• Inspect the housing O-ring and replace if damaged; install cap by hand-tightening until snug
• Do not overtighten; overtightening can damage the cap or housing
• If leaks persist after installation, recheck seating and O-ring condition or replace damaged components

This hose sump is the molded drain hose elbow that routes washer drain water from the tub area to the drain/pump. It restores proper drainage routing and helps stop leaks where the tub outlet meets the drain hose. What it does

• Channels drain water from the washer tub to the drain/pump assembly
• Replaces cracked, split or hardened elbows that can cause leaks at the base of the washer
• Helps restore proper water flow so the washer can drain completely
• Fits where a molded sump/drain elbow is used between the tub outlet and drain hose

• One hose sump

• Disconnect power and shut off water before starting any repair
• Drain residual water from the tub and disconnect the old hose before removing
• Secure new sump with the existing hose clamp(s) and confirm a snug, leak-free fit
• If clamps or adjacent hoses are corroded or damaged, replace them to ensure a reliable seal

This cup siphon is the dishwasher detergent siphon cup that helps move detergent from the dispenser into the wash cycle for consistent cleaning performance. Replaces a damaged or worn detergent siphon cup. What it does

• Channels liquid or powdered detergent from the dispenser cup into the washer during the appropriate cycle.
• Prevents detergent from remaining trapped in the dispenser, helping restore proper wash chemistry.
• Commonly used when detergent isn't dispensing, the dispenser cup leaks, or the dishwasher leaves residue on dishes.
• Simple, literal replacement part — restores the dispenser's intended detergent flow.

• One detergent cup siphon.

• Disconnect power and water to the appliance before servicing.
• Remove the old dispenser assembly per your user/service manual; this part typically installs into the dispenser housing and secures by clip or press-fit.
• Handle plastic components carefully to avoid cracking; replace any damaged clips or seals as needed.

This replacement badge is the small logo emblem that mounts to the appliance exterior to restore original appearance and branding. It provides a clean, professional look when the original emblem is missing, faded, or damaged. What it does:

• Replaces a missing, cracked, or faded exterior logo emblem
• Restores factory appearance on doors, panels, or control bezels
• Helps identify the appliance and maintain resale value
• Cosmetic-only part; does not affect appliance operation

• Surface-mount installation; may use adhesive or snap-fit depending on model—inspect original attachment method before installing
• Clean and dry mounting surface thoroughly for best adhesion
• Handle carefully to avoid scratching finished surfaces

This short shipping bolt assembly secures internal components during transport and protects the appliance from movement-related damage. Use it when preparing the appliance for moving or to replace missing/damaged shipping hardware. What it does:

• Secures compressor/mounting bracket and other components during shipping to prevent movement
• Helps prevent noise, vibration, or impact damage that can occur during transport
• Replaces missing or broken shipping hardware that should be installed before moving the appliance
• Not a regular service fastener—intended for shipping and transport protection only

• One short shipping bolt assembly (exact OEM configuration)

• Follow the appliance OEM shipping instructions; only install while the unit is being moved or transported
• Always unplug the appliance and follow proper safety procedures before handling hardware
• Tighten to the manufacturer's specified torque if provided; do not overtighten
• Keep removed shipping bolts in a safe place after installation for future moves

This funnel cleanout is the replacement funnel-shaped drain piece that directs water and debris toward the drain pump, helping restore proper draining and reduce clog buildup. Fits in the washer drain path to aid cleanout and flow. What it does:

• Channels water and loose debris from the tub to the drain pump area to reduce blockages
• Helps clear standing or slow-draining water when inspected/cleaned
• Reduces the chance of items lodging before the pump inlet
• Common symptom link: slow drain, water remaining in tub, or unusual draining noises

• Disconnect power and water supply before accessing internal components
• Remove access panels to reach the drain area
• Inspect surrounding hoses and pump for debris while replacing the funnel