Glb30tdsa Parts

This is a replacement screw used to secure appliance components and panels so assemblies stay stable and aligned. It provides a straightforward fix when a mounting fastener is missing, stripped, or damaged. What it does

• Secures panels, brackets, or trim to prevent movement and vibration
• Stops rattling or loose parts caused by missing or damaged screws
• Restores proper fit and alignment of the affected assembly
• Works wherever the OEM-designated screw of this size and thread is required

• Turn power off or unplug the appliance before working on electrical areas
• Use the proper-size driver to avoid stripping the head
• Start threads by hand, then tighten until snug — do not overtighten
• If the original screw is corroded or the hole is damaged, inspect mating parts for repair before installing

This is a genuine mounting screw used to secure appliance components and panels for a safe, stable fit. It replaces a lost or damaged fastener to restore proper alignment and reduce rattles or loose trim. What it does:

• Secures panels, trim, brackets or small assemblies to the appliance frame
• Prevents vibration-related noise and loose or sagging parts
• Restores proper fit after repair or disassembly
• Useful when the original screw is stripped, missing, or broken

• One mounting screw

• Use the correct screwdriver or bit to avoid stripping the head
• Power off and unplug the appliance before servicing when applicable
• Keep removed hardware organized to ensure correct reassembly
• If threads are damaged, replace with the specified OEM screw only

This small mounting retainer clip secures panels and components in place on your appliance, helping keep parts aligned and reducing rattles. A simple replacement when a worn or broken clip allows loose or misaligned panels. What it does:

• Holds trim, panels, or wiring channels in position to prevent movement and noise
• Restores proper fit where a cracked or missing clip lets parts sag or separate
• Helps maintain seals and component alignment for normal operation
• Works as a direct-fit replacement clip used on specified Frigidaire assemblies

• One mounting retainer clip

• Disconnect power before starting any repair to avoid shock or injury
• Access the clip location by removing the outer panel or trim per your model's service instructions
• Remove the broken clip and press or snap the replacement into the existing mounting slot until fully seated
• If fasteners are present, reuse OEM screws; do not force clips into damaged plastic

This replacement frame restores the appliance's front trim and secures the control/door area for a finished look and proper panel alignment. Use it to repair bent, cracked, or loose trim and return the unit to safe, stable operation. What it does:

• Replaces damaged or warped front cabinet trim to restore proper panel fit and appearance
• Secures the control panel/door edges and helps maintain correct alignment
• Prevents gaps that can collect dirt or interfere with door operation
• Common symptom: visible cracks, dents, separation or loose trim around the front panel

• One replacement frame

• Disconnect power to the appliance before starting any repair
• Remove exterior trim screws or clips holding the old frame; retain fasteners unless replacements are provided
• Handle edges and any attached glass or plastic carefully to avoid damage or injury

This small retaining clip secures trim, panels, or components in place to prevent rattling or detachment during normal operation. It's a simple, low-profile fastener that restores fit and function where the original clip has broken or gone missing. What it does:

• Holds panels, bezels, or wiring harnesses in position to stop vibration and movement
• Replaces worn, broken or missing clips that cause loose trim or gaps
• Helps maintain proper alignment of adjacent parts for reliable operation
• Works as a direct-fit fastening solution where the original clip is used

• One retaining clip

• Disconnect power to the appliance before attempting any repair
• Access may require removing panels or trim; use appropriate screwdrivers or trim tools
• Install by aligning the clip with the mating slot or hole and pressing firmly until it snaps into place

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

The Drain Hose is an OEM part for Whirlpool built-in dishwashers. As the tube removes wastewater after each cycle, it plays a key part in sanitizing dishes. 

Causes of a bad Drain Hose can include mineral deposits inside over many years reducing flow. Cracks may also form from constant flexing as it transport water to the garbage disposer or sink drain.

Symptoms of a bad drain hose include:

• Puddles or pooling inside the dishwasher 
• Incomplete drainage leaving residue on dishes
• Leaks around hose connections

This genuine Whirlpool replacement is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore too. 

Color: White

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This fold-down tine row mounts on the lower dishrack to hold plates and bowls upright. It creates adjustable slots and folds flat to make space for pots, pans, and other large items.

• Holds dishes securely in the lower rack; folds down for flexible loading
• Restores support when the original tine row is bent, rusted, or missing
• Helps prevent items from tipping when tines won't stay up or are broken
• Attaches to existing mounting points on the rack and pivots up/down

• Disconnect power to the dishwasher
• Slide out the lower rack and place it on a stable surface
• Release the locking tabs/clips holding the old tine row and remove it
• Snap the new tine row into the same mounting points; verify it locks upright and folds smoothly

This dishwasher rack tine row replaces a damaged or missing row so plates, lids, and shallow pans stand upright during the wash. Restores stable loading and spacing to help items stay put and get consistent spray coverage.

• Creates vertical dividers on the rack to hold dishes upright and separated
• Helps maintain spacing for effective spray coverage and drying
• Common symptoms of failure: bent or broken tines, row won't stay secured, or missing section
• When worn, dishes can tip over, reduce capacity, or cleaning performance may suffer

• Power off the dishwasher; wear gloves to avoid sharp edges
• Slide out and remove the affected rack for easier access
• Release locking tabs or clips to remove the old row; transfer any reusable end clips or retainers
• Snap the new tine row securely into place and reinstall the rack

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

This cup shelf attaches to the upper rack and flips down to hold small cups, lids, and utensils securely during the wash. It helps organize the rack and improves cleaning by keeping lightweight items in place.

• Provides a stable surface for small cups and accessories on the upper rack
• Flips up when not in use to free rack space
• Helps prevent small items from being tossed by spray action
• Commonly replaced when cracked, warped, or missing

• Unplug the appliance or turn off power and water before service
• Open the dishwasher, lower the upper rack, and locate the mounting points
• Align and snap the cup shelf onto the rack tines or brackets
• Ensure it pivots smoothly and locks in the up/down positions before use

Replace a damaged lower-rack silverware basket to keep forks, knives and spoons organized and secure during dishwasher cycles. This OEM-style cutlery basket restores proper utensil spacing for more consistent cleaning and easier unloading. What it does:

• Holds silverware and small utensils upright in the dishwasher lower rack for improved wash coverage
• Keeps utensils separated to reduce nesting and help water reach all surfaces
• Prevents loose cutlery from falling through the rack and blocking spray arms
• Commonly replaced when the basket is cracked, missing sections, or no longer holds utensils securely

• Remove the lower rack, lift out the old basket and set the replacement into the same position
• No special tools typically required; verify the basket snaps or sits securely in the rack
• Handle sharp utensils carefully during removal/installation
• If rack rails or holders are damaged, inspect those components separately before completing the install