Gne25jskffss/Dl308174 Parts

A short 8-32 x 3/8 hex washer head screw used to secure small appliance panels and components. Simple replacement for stripped or missing fasteners to restore proper fit and prevent rattles or loose parts. What it does:

• Secures panels, brackets, and small assemblies in place
• Helps eliminate vibration-related noise from loose parts
• Replaces missing, damaged, or corroded screws to restore proper alignment
• Fits standard 8-32 threaded holes requiring a 3/8" length screw

• One 8-32 x 3/8 hex washer head screw

• Use the correct 8-32 driver to avoid stripping the head
• Tighten snugly but avoid over-torquing to prevent thread damage
• Disconnect power and follow appliance safety procedures before accessing internal components
• Replace only like-for-like fasteners in load-bearing or safety-critical locations

This bracket support is a small mounting bracket that secures and stabilizes appliance components, helping keep panels and assemblies aligned for proper operation and reduced vibration. It's a direct-fit replacement when the original bracket is broken or missing. What it does

• Provides a sturdy mounting point to hold panels or internal components in place
• Restores proper alignment to doors, panels or assemblies that sit on the bracket
• Reduces rattling or vibration caused by a loose or damaged bracket
• Helps prevent wear or damage from parts shifting during use

• Unplug the appliance and shut off water/gas (if applicable) before starting work
• Use the original mounting screws; replace damaged fasteners as needed
• Handle sharp sheet-metal edges carefully and wear gloves and eye protection

This water line cover protects and conceals the refrigerator's water supply tubing behind the lower kickplate for a finished look and reduced risk of accidental snagging. Durable plastic shields tubing from contact and helps keep the area tidy. What it does:

• Covers and protects the refrigerator water supply line from accidental pulls or abrasion
• Keeps the tubing out of sight for a neater appearance
• Helps reduce noise from loose tubing contact with other components
• Supports proper routing of the water line to the ice maker/water dispenser

• One water line cover

• Disconnect power and shut off the water supply before servicing
• Remove the kickplate or access panel per the owner's manual to reach mounting points
• Align cover with the routing area and secure with existing clips or fasteners; do not force or modify

This clip retainer combo secures appliance panels and trim, restoring proper fit and preventing rattling or sagging. It replaces worn or broken retainers so doors, drawers, or trim pieces stay aligned and stable. What it does:

• Holds and aligns trim or panel pieces to the appliance cabinet
• Prevents loose, vibrating, or sagging panels and trim
• Replaces cracked or broken retainers that no longer secure parts
• Restores a flush, finished appearance and reduces noise from vibration

• Disconnect power to the appliance before beginning any repair
• Remove the affected panel or trim per the appliance service instructions
• Press or snap the retainer into the mounting location until it seats fully; reinstall panel/trim
• If clips are brittle or adjacent fasteners are damaged, inspect and replace as needed

This pantry divider is a replacement shelf divider for the refrigerator pantry compartment that restores proper organization and prevents items from shifting. It fits into the pantry shelving system to help keep tall or narrow items separated and upright. What it does:

• Replaces a cracked, broken or missing pantry divider to re-establish shelf organization and containment
• Helps prevent jars, bottles and condiments from tipping or sliding during door use
• Restores the intended divider spacing to keep items separated for easier access
• Compatible with the pantry shelf track system used in the refrigerator's pantry compartment

• Slide or snap the divider into the pantry shelf track; ensure it seats fully before use
• No special tools typically required; review your refrigerator's shelf/pantry layout before installation
• Handle carefully to avoid chipping plastic edges; discard old broken pieces safely

This top interface is the outer control-panel surface for select GE ranges and ovens, finished in Dorian Gray to match the appliance trim. It restores the look and provides a clean surface for the control buttons and display. What it does:

• Serves as the front surface for the appliance control area and covers the underlying switch and display components.
• Restores cosmetic appearance when the original panel is faded, scratched, or discolored.
• Helps maintain a stable, accessible surface for control buttons and touch areas.
• Resolves issues where dirt, wear, or damage prevents reliable button actuation or clear display visibility.

• One top interface panel (Dorian Gray) as shown

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Removal typically requires accessing the console by removing screws and gently separating the panel from the console assembly.
• Handle with care to avoid scratching the finish; align clips and fasteners before tightening.

This ice maker support is a replacement mounting bracket that holds the ice maker assembly securely in the freezer, restoring proper alignment and stability for reliable ice production and dispensing. What it does:

• Secures the ice maker assembly to the freezer cabinet to prevent shifting or sagging
• Helps maintain proper alignment so the ice maker fills and cycles reliably
• Can stop noises or intermittent operation caused by a loose mount
• Works with the ice maker housing and related fasteners to keep components in place

• High-level replacement: typically unclips or fastens with screws; access requires opening the freezer compartment
• Disconnect power to the appliance before attempting any service to avoid electrical shock
• Keep track of removed fasteners and panels for reassembly; test ice maker operation after installation
• If the ice maker or other components are damaged, replace those parts separately as needed

This replacement divider restores organization inside the refrigerator, keeping items separated and preventing shifting for neater storage. It fits into the shelf or crisper area to help maintain usable space and order. What it does:

• Separates and organizes food items on a shelf or in a crisper/drawer
• Helps prevent small items from sliding or toppling during door use
• Replaces cracked, broken, or missing dividers to restore function
• Compatible with units that use this exact divider design and mounting

• Unplug the appliance or disconnect power before beginning work.
• Remove food and any affected shelves/drawers for easier access.
• Inspect mounting grooves or clips and align the divider before seating firmly.
• If the divider is glass or fragile, handle carefully and use gloves to avoid cuts.

This water filter cover is the replacement housing that secures and seals the refrigerator's water filter cartridge, keeping the filter in place and helping prevent leaks and debris entry. Restores proper fit and appearance. What it does:

• Secures the water filter cartridge in the filter bay to maintain a proper seal
• Helps direct water flow to and from the filter for normal dispensing and icemaking
• Protects the filter from dust and debris that can affect water quality
• Can reduce or stop minor leaks caused by a cracked or missing cover
• Restores the finished look of the filter area

• One water filter cover

• Turn off refrigerator water supply and dispense any remaining water before starting
• Disconnect power or follow manufacturer safety instructions to avoid electrical hazard
• Typically installs by aligning and snapping or fastening into the filter compartment; keep original fasteners if present
• After installation, turn water back on and check for leaks; run water through dispenser to purge air

This condenser fan and housing assembly circulates air over the refrigerator condenser to help dissipate heat and maintain efficient cooling. Replaces a worn or damaged condenser fan unit to restore proper airflow and reduce overheating. What it does:

• Moves air across the condenser coils to support the refrigeration cycle and prevent heat buildup
• Helps the compressor run within normal temperature by improving condenser cooling
• Commonly used to fix noisy, non-spinning, or damaged condenser fan problems
• Restores proper airflow when the original fan blade, motor mount or housing is cracked or bent

• Disconnect power to the appliance before beginning any service to avoid electrical shock
• Access typically requires removing lower kickplate or rear access panel—keep fasteners for reassembly
• Inspect wiring connectors and mounting points; replace only if explicitly specified for this part