Gne25jsknfss Parts

This refrigerator door gasket replaces a worn or damaged door seal to restore a tight closure. A proper seal helps keep cold air in, reduce moisture and frost, and maintain consistent temperatures for better food preservation.

• Forms an airtight seal between the door and cabinet to contain cold air
• Helps maintain stable internal temperatures and efficiency
• Can reduce condensation or frost around the door opening
• Helps with symptoms like a door not sealing, gaps, or warm spots inside

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Remove the old gasket and clean the door channel and mating surfaces
• Warm the new gasket in hot water to relax bends; press fully into the door channel starting at the corners
• After installation, ensure even contact all around; use low, controlled heat only if needed to smooth waves, and avoid overheating plastics

The Overload PTCR Combo is an OEM part for GE refrigerators. This assembly includes both the start relay and the overload. The start relay is responsible for providing an extra boost of power to kick-start the compressor, while the overload acts as a safety mechanism to protect the compressor from electrical overload. Together, they help maintain cooling and prevent damage to the compressor.

A bad start relay and overload combo can occur due to electrical malfunctions or wear and tear over time. If you notice symptoms such as the refrigerator not cooling properly, unusual noises coming from the compressor, or the compressor not starting at all, it may be time to replace the combo.

Symptoms of a bad start relay and overload combo include:

• Inadequate cooling in the refrigerator
• Unusual noises coming from the compressor
• Failure of the compressor to start

Restore the proper function of your GE refrigerator's compressor by replacing the faulty start relay and overload combo with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Shelf Cantilever Assembly is an OEM part for GE refrigerator shelves. It is a specialized set of brackets and brackets that securely mounts glass shelves to side rails for flexible organization within refrigerator interiors. 

Symptoms of failure include:  

• Shelves detaching from side rail mounts suddenly  
• Leaning or sagging of shelves unable to properly bear weight
• Cracked or broken componentry rendering assembly unusable

Causes relate to normal metal fatigue from hundreds of pounds of varying contents over many years. Exposure to sharp items may also damage mounting points.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models. 

The Manifold & Housing are OEM components specifically designed for GE refrigerators. This part includes both the manifold which distributes water and the outer housing that protects it. 

The manifold & housing work together to deliver filtered water to the refrigerator's dispenser and ice maker. It is responsible for efficiently directing water flow and ensuring reliable operation of components that require water. 

Symptoms of a bad manifold & housing include:

• Low water pressure at the dispenser 
• Streaking or staining around water line connections
• Ice maker or dispenser malfunctions due to lack of water
• Dripping or leaks from manifold or housing areas

This OEM GE part is specifically designed to fit your model fridge. It is also compatible with Hotpoint, RCA, and some Kenmore models for a factory fit and like-new performance.
 

This vegetable pan support assembly holds and guides the crisper/vegetable drawer so it opens smoothly and keeps the cover/shelf above level. Replace a damaged support to restore proper drawer alignment and prevent sagging or sticking. What it does:

• Supports the crisper/vegetable drawer and the cover/shelf it rides on
• Maintains level alignment to reduce binding, scraping, or tipping
• Provides a stable track point for smooth drawer movement
• Common symptoms: drawer tilts, binds, or falls; shelf sags; visible cracks or broken tabs on the support

• 1 vegetable pan support assembly

• Unplug the refrigerator before servicing
• Remove the crisper drawer and cover/shelf to access the support
• Match the new support's orientation to the original; transfer any reusable hardware if applicable
• Seat the support fully and securely before reinstalling the cover/shelf and drawer; test drawer travel

This replacement air tower assembly is the vertical duct that channels chilled air through the refrigerator compartment. Replacing a damaged tower restores proper airflow to help maintain even temperatures and consistent cooling from top to bottom.

• Directs cold air from the evaporator to vents in the fresh food section
• Helps balance temperatures and reduce warm spots
• Often replaced when the original is cracked, broken, or warped
• Common symptoms: weak airflow from refrigerator vents and uneven cooling in the fresh food compartment

• Disconnect power to the refrigerator before servicing.
• Remove shelves and bins for access; release tabs or remove screws securing the old tower.
• Transfer any clips or sensors from the original, if present; seat and secure the new tower.
• Restore power and verify airflow from the vents.

The Damper Assembly is an OEM component specifically designed for GE refrigerators. This assembly is located within the fresh food compartment and functions to control airflow and temperature regulation. 

The damper works with the evaporator fan to carefully moderate circulating air, preventing cold spots and optimizing equal cooling. Consistent temperatures extend the shelf life of perishable goods. 

Causes of a faulty damper assembly can include failure of the plastic gears or axle that coordinate its movements over time. Improper air circulation disrupts the refrigerator's performance.

Symptoms include: 

• Formation of frost or ice buildup in problem areas  
• Inconsistent shelf temperatures from top to bottom
• Foods spoiling more quickly 

This replacement assembly from GE restores dependable temperature control. Upgrade today for continued fresh food preservation abilities matching OEM standards. It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This is a grommet and it is intended for use on refrigerators and freezers. This is a genuine replacement part made by General Electric. A new grommet might be needed if the current one is visibly worn out or damaged in any way. If there are noises from vibration coming from the lower back area of the fridge there might be need for a new grommet. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with refrigerators and freezers, or units with a compressor and is made by General Electric.

The Main Control Board is an OEM part for GE refrigerators. This printed circuit board monitors and regulates all primary refrigerator functions through microprocessor control and digital signal processing. 

Symptoms of a bad main control board include:

• Unpredictable or complete failure of cooling systems  
• Fault codes are displayed but compression fails to restart 
• Sensors stop functioning or show erroneous readings
• Lights, alarms, and door functions become nonresponsive

Causes can be water exposure compromising components or failures due to typical wear like cracked solder joints over many years of duty cycles.

This GE OEM replacement ensures optimized performance through intelligence monitoring. With advanced circuitry, it restores full refrigerator and freezer temperature control along with dependent features. Compatible with some Hotpoint, RCA, and Kenmore models.
 

The Stainless Steel Door Handle is an OEM part for GE refrigerators. It is the exterior handle located on the refrigerator and freezer doors that allow for easy opening and closing access.

Causes of a bad door handle can include damage, wear and tear over time that reduces functionality, or corrosion compromising the smooth operation and durable finish of the handle.

Symptoms of a failure include:

• Difficulty opening or closing the refrigerator doors  
• Loose, awkward, or improper movement of the handle
• Chipped paint, rusting, or deterioration of exterior surface
• Reduced aesthetic appeal detracting from overall appliance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Size: 10-32 GXTT FLP.595 S

The Grommet and Tube Icemaker Assembly is an OEM part for GE refrigerators. This assembly features a sealing grommet that fits snugly around refrigerant tubes entering the icemaker system. It prevents air leaks while allowing flexible movement of insulated tubing.

Symptoms of a bad grommet assembly include:

• Frost or condensation building up around the tube entry point  
• Difficulties with the icemaker maintaining proper freezing temperatures

Causes can be splits or cracks in the rubber grommet developing after years of fluctuating fridge temperatures contracting and expanding the material. 

This GE OEM replacement restores the crucial refrigerant line seal into the icemaker. Its durable grommet protects the refrigeration circuitry to ensure efficient icemaking for the life of the appliance. Compatible with some Hotpoint, RCA, and Kenmore side-by-side refrigerator configurations.
 

This hex-head screw secures refrigerator components where a 12-24 x 7/8 in fastener is specified. Replacing a missing, stripped, or rusted screw restores a tight, reliable fit for brackets, panels, and assemblies and helps eliminate vibration and rattles.

• Fastens panels, brackets, and other assemblies in the refrigerator at locations calling for this size hardware
• Replaces worn, stripped, or missing screws to restore secure mounting
• Helps correct loose or misaligned components and reduce vibration noise
• OEM size: 12-24 thread, 7/8 in length; hex head

• Disconnect power and, if applicable, shut off the water supply before service
• Match the screw to the original location; replace one at a time to maintain alignment
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use an appropriate nut driver or socket that fits the hex head

This cam closure is the small pivot piece that helps the refrigerator fresh-food door close and stay aligned. Replacing a worn or broken cam restores smooth door movement and helps the door seal evenly to maintain cooling. What it does:

• Guides the fresh-food door cam so the door pivots and latches correctly.
• Helps correct sticking doors, doors that hang or bind, and uneven gaps that can let cold air escape.
• Replaces a worn, cracked, or broken closure that can cause misalignment or noisy door operation.

• Disconnect power or unplug the refrigerator before beginning any work.
• Remove the door or access trim per the manufacturer's instructions to reach the cam area; keep track of hinge pins and fasteners.
• Pry or pop out the old cam and press the replacement into the cam slot until it snaps into place; check door alignment and operation after installation.

This cable clamp secures refrigerator wiring to the cabinet, keeping harnesses organized and protected. Replacing a missing or damaged clamp helps prevent chafing and vibration noise while maintaining proper clearance from fans and other moving components.

• Anchors wire harnesses in their designed routing
• Helps prevent insulation wear from rubbing or vibration
• Keeps wires clear of sharp edges and moving parts
• Common signs it's needed: missing/broken clamp, loose or dangling wires, or new rattling/buzzing noises

• Disconnect power before servicing
• Access the clamp location and note original wire routing
• Position the clamp and secure with the existing fastener; do not overtighten
• Ensure wires aren't pinched and have clearance from the fan/compressor before restoring power

Specs: 8-18 AB IHW 5/8 S