Gne25jsknfss Parts

This striker top mullion replaces the top striker piece that the refrigerator door latch catches on, restoring proper door engagement and a tight seal. Useful when the striker is worn, damaged, or misaligned. What it does

• Provides the mating strike surface for the door latch so the door stays securely closed.
• Helps maintain an even door seal to reduce cold-air leaks and temperature loss.
• Stops door misalignment or rattling caused by a worn or broken striker.
• Compatible with standard mullion assemblies that use a separate top striker piece.

• One striker top mullion.

• Disconnect power and remove food from the door area before starting work.
• Inspect the surrounding mullion and latch for wear; replace damaged components as needed.
• Handle edges carefully; mounting screws or clips may be required.

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

This switch actuator is the small control lever that presses a switch inside the appliance control panel so the user's button or dial can change settings. It restores reliable physical actuation for responsive controls. What it does

• Transfers user input from a button or dial to the internal switch so circuits can change state
• Replaces a broken, worn, or missing actuator that causes unresponsive buttons or stuck controls
• Helps restore proper control-panel operation without replacing the whole switch assembly
• Works with the original internal switch mechanism to maintain OEM fit and function

• Disconnect power to the appliance before any service to avoid shock or injury.
• Access the control panel or console per the service guide; actuator is usually secured to the front control or switch housing.
• Remove only the damaged actuator and install the replacement; do not force parts or modify components.

This sound damper cushions the refrigerator compressor to reduce vibration and minimize noise for quieter operation. It helps protect the compressor from metal-on-metal contact and dampens normal operating sounds. What it does:

• Cushions compressor mounting to absorb vibration and reduce noise
• Prevents metal-on-metal contact that can cause rattling or buzzing
• Helps stabilize the compressor to reduce wear from vibration
• Commonly used when compressor noise, rattling, or increased vibration is noticed

• One sound damper

• Always disconnect power to the appliance before beginning any repair
• Access the compressor area (rear lower cabinet); remove any panels as needed
• Remove the old damper and press the replacement onto the compressor mounting foot until fully seated
• If mounting hardware is damaged or the compressor mount appears worn, replace mounting parts.

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Shelf Door Module is an OEM replacement part for GE refrigerators. This door shelf can fit both left and right doors, depending on your refrigerator model. For models with an external ice and water dispenser, the door shelf bin will be used on the right door only.

Causes of a bad shelf door module can include damage from unexpected door impacts or overloading the shelves over time. Repeated interior cleansings using improper chemicals may also degrade gaskets and seals.

Symptoms of a bad shelf door module include: 

• Difficulty opening or closing the shelves smoothly  
• Leaks or wet shelves from failed door seals
• Loss of an organized storage section inside
• Restricted access to shelves due to misalignment

This OEM part is also compatible with Hotpoint, RCA and some Kenmore models. 

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

The Evaporator Fan Motor is an OEM part for GE refrigerators. This part is responsible for circulating air over the refrigerator's evaporator coils to ensure a uniform distribution of cold air within the unit.  

Causes for a fan motor to fail can include electrical issues, such as blown fuses or faulty wiring, wear and tear from prolonged use, and obstruction caused by ice buildup or debris. 

Symptoms of a malfunctioning Evaporator Fan Motor include:

• The refrigerator or freezer section is not cooling efficiently.
• A noticeable increase in the temperature of the fridge or freezer compartments.
• Strange noises, such as humming or buzzing, emanating from the fan area.
• The fan fails to run when the refrigerator is active, indicating a potential motor failure.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Door Bin is an OEM replacement part for GE refrigerators. It is designed to provide storage space and organization on the lower right side of your refrigerator door.

A bad lower door bin can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as a cracked or broken bin, difficulty in storing items on the door, or items falling off the shelf, it may indicate a faulty or malfunctioning lower door bin.

Symptoms of a bad lower door bin include:

• Cracked or broken bin
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's lower right door by replacing the faulty shelf bin with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This access cover closes a service opening on the refrigerator cabinet, protecting internal components and restoring a secure, finished fit. Replacing a cracked or missing cover helps keep debris out and supports proper operation and airflow paths.

• Covers the machine/service compartment to shield wiring, fan, and other components from contact and debris
• Helps maintain designed airflow through the compartment when properly installed
• Reduces vibration and rattling when the cover is secured
• Replace if the cover is missing, cracked, warped, or no longer fastens securely

• Disconnect power before servicing
• Remove any retaining screws/clips and note the cover's orientation and vent/slot alignment
• Transfer any original grommets or insulation to the new cover if present
• Reinstall with existing hardware; do not overtighten; ensure openings/vents remain unobstructed

The Water Filter Head and Insulation Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for securely holding the water filter in place and insulating it from external temperature changes, which helps maintain the temperature of the filtered water, ensuring that it remains cool.

A bad water filter head and insulation assembly can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as water leaks around the filter area, reduced water flow, or a decrease in the effectiveness of the water filter, it may indicate a need to replace this assembly.

Symptoms of a bad water filter head and insulation assembly include:

• Water leaks around the filter area
• Reduced water flow or weak water pressure
• A decrease in the taste or quality of the filtered water

Restore you refrigerator by replacing the faulty water filter head and insulation assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Gear Pinion is an OEM component specifically designed for GE French door refrigerators. This part is responsible for the smooth operation of door hinges and closing mechanisms. 

The gear pinion works together with other inner door components to evenly distribute strength across the refrigerator’s motion system. This ensures doors move fluidly and stay securely sealed when closed. 

Causes of a bad gear pinion can include wear from repetitive use over many years, stress from overloading the doors, or misalignment of connecting mechanisms.

Symptoms of a bad gear pinion include: 

• Doors not closing or latching properly
• Binding or sticking movement  
• Noise or vibration when opening/closing
• Increased effort required to operate doors

Note: Right-hand side

Replace this precision gear with a genuine GE OEM part to restore dependable door functionality. This product is also compatible with Hotpoint, RCA, and Kenmore refrigerator models.
 

This vegetable drawer replaces a cracked, broken or missing refrigerator crisper bin and restores secure storage for produce. Keeps fruits and vegetables organized and helps reduce spills and loose items in the lower compartment. What it does:

• Provides a dedicated bin for fruits and vegetables to keep produce organized
• Slides into the refrigerator crisper compartment on the existing rails
• Replaces damaged or missing drawers that allow items to fall or shift
• Helps contain minor spills for easier cleanup

• Empty the drawer and surrounding area before removal; remove food items first
• Pull drawer straight out to the stops, then lift to clear the tracks; reverse to install
• Do not force the drawer; check rails/tracks for damage and replace rails if worn
• Disconnect power only if removing nearby electrical components—this is a mechanical part

The Center Hinge is an OEM part for GE refrigerators. It is responsible for connecting and supporting the refrigerator doors, allowing them to open and close smoothly.

A bad center hinge can be caused by wear and tear over time, excessive weight or force applied to the doors, or damage due to accidental impact or mishandling.

Symptoms of a bad center hinge include:

• Difficulty in opening or closing the refrigerator doors.
• Squeaking or grinding noises when opening or closing the doors.
• The doors not staying securely closed.
• Uneven alignment of the doors.

Replace your worn-out or damaged center hinge with this genuine OEM part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.