Gne27jsmdfss Parts

The Quick Space Shelf is an OEM part for GE refrigerators. It sits on sliding tracks and provides an adjustable shelving solution inside the fresh food compartment. 

Symptoms of a bad Quick Space Shelf include:

• Difficulty sliding smoothly along trackways due to dirt, grime, or misalignment
• Instability or sagging from broken plastic shelf supports  
• Shelving tracks that fail to keep the shelf locked into position

Causes of failure can be normal wear and tear over time, accidental impacts, or overloading beyond its weight capacity. Trapped debris may also interfere with proper functionality.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Glass Shelf is an OEM replacement part for GE refrigerators. It provides storage space for refrigerated items on a temperature-controlled surface. 

Causes of a bad glass shelf can include chips or cracks from repeated loading/unloading of items, sagging or bowing from long-term weight pressure, or damage due to impacts within the refrigerator.

Symptoms of a bad glass shelf include:

• Items falling through shelf or sliding off surfaces  
• Visible fractures, chips, or broken glass
• Shelf sagging low or bowing up in the middle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Temperature Sensor Grille is an OEM part for GE refrigerators. This grille covers and protects the temperature sensor, ensuring it accurately measures the internal temperature of the refrigerator.  

Causes of a bad grille can include physical damage from impacts, regular wear and tear, or the buildup of dust and debris that can obstruct airflow.  

Symptoms of a bad temperature sensor grille include:

• Inaccurate temperature readings
• The refrigerator running continuously or not cooling properly
• Visible damage or obstruction on the grille
• The sensor becoming loose or dislodged

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Door Handle is an OEM part for GE refrigerators. This door handle is designed to provide a sturdy and reliable way to open your freezer door. It allows you to effortlessly open and close the freezer door, providing a comfortable grip for everyday use.

A bad freezer door handle can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as a loose or broken handle, difficulty in opening or closing the freezer door, or an unsightly appearance, it may be time to replace the handle.

Symptoms of a bad freezer door handle include:

• Loose or broken handle
• Difficulty in opening or closing the freezer door
• Scratched or worn-out appearance

Restore the function of your GE freezer by replacing the faulty door handle with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Glass Shelf is a genuine OEM replacement part designed specifically for GE refrigerators. This glass shelf is located on the left side of the refrigerator compartment and provides a stable and convenient surface for storing various food items.

A faulty left glass shelf can occur due to regular wear and tear, accidental damage, or misalignment. If you notice signs such as cracks, chips, or a sagging shelf, it may be time to replace the glass shelf.

Symptoms of a bad left glass shelf include:

• Cracks or chips on the surface
• Sagging or instability
• Difficulty in storing or accessing items

Restore your refrigerator by replacing the faulty left glass shelf with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Defrost Heater is an OEM part for GE refrigerators. This part melts any frost that accumulates on the evaporator coils during the cooling cycle, ensuring that the refrigerator operates efficiently and prevents ice build-up.

Common causes of a bad defrost heater include wear and tear over time, electrical failures, or damage from excessive frost or ice accumulation.

Symptoms of a bad Defrost Heater include:

• Frost or ice buildup on the evaporator coils
• The refrigerator or freezer not maintaining proper temperatures
• Longer defrost cycles or the defrost cycle not working at all
• Unusual noises during the defrost cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Bucket is an OEM part for GE freezers. This part is specifically designed to store ice cubes, providing a convenient solution for keeping your drinks cool and refreshing. This ice bucket ensures proper storage and easy access to ice whenever you need it. It is made of high-quality materials that can withstand the freezing temperatures of your freezer and the daily demands of ice storage.

A bad ice bucket can occur due to accidental damage, wear and tear, or other factors. If you notice symptoms such as cracks, leaks, or difficulty in accessing the ice from your current bucket, it may be time to replace it with a new one.

Symptoms of a bad ice bucket include:

• Cracks or damage
• Leaks or drips
• Difficulty accessing ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This fan-mount grommet fits the evaporator or condenser fan assembly to isolate vibration and keep the motor aligned. Replacing a worn grommet can quiet rattles and prevent the fan blade from rubbing the housing. What it does:

• Isolates the fan motor from its bracket to reduce vibration and operating noise
• Helps maintain proper fan motor and blade alignment/clearance
• Replaces cracked, flattened, hardened, or missing grommets
• Typical symptoms: rattling, buzzing, or vibration sounds from the freezer or rear machine compartment

• 1 fan motor grommet

• Disconnect power before servicing; pull the refrigerator forward for rear access if needed
• Evaporator fan: remove the freezer's rear panel; condenser fan: remove the rear service panel
• Support the motor, remove the fan blade and mounting hardware as needed, replace the grommet, and reassemble
• Ensure the fan spins freely and does not contact the shroud before restoring power

The Tube Lead is an OEM part for GE refrigerators. It is responsible for routing water through the unit.

Causes of a bad tube lead can include mineral accumulation restricting flow, loosened compression fittings, or cracked/split tubing exposing water to air.

Symptoms of an issue with the water line tube lead include:

• Slow or inconsistent water and ice production
• Water pressure or temperature fluctuations at the dispenser
• Leaks in the refrigerator's exterior bottom panel

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

RFID board that reads the filter's RFID chip and communicates with the refrigerator control to manage filter status and water dispensing. Replacing a failed board restores proper filter recognition and allows dispensing when a valid filter is installed.

• Reads/authenticates RFID-enabled water filters and reports status to the main control
• Enables or disables water dispensing based on filter presence/validity
• Supports filter-life tracking and "replace filter" indications on the display
• Failure symptoms include "filter not detected," replace light won't reset, or no water dispense after a filter change

• Disconnect power before service; shut off water if working around the filter/housing
• Access the board near the filter area; note connector orientation; transfer any mounting clips/covers as needed
• Handle electronics by the edges and use ESD precautions
• Restore power, install a compatible RFID-enabled filter, and dispense water to confirm recognition and flow

This support pin restores secure support for interior components in your refrigerator, helping shelves or bins stay aligned and level. Replace a worn or missing pin to stop wobble and keep stored items stable.

• Provides a mounting point for a refrigerator shelf, bin, or bracket
• Helps keep components aligned and prevents sagging or dropping
• Replaces a broken, worn, or missing pin
• Common symptoms: shelf/bin tilts, won't stay in place, or pin is visibly damaged

• Disconnect power and remove items from the area before servicing
• Note the orientation of the original pin to match during reinstallation
• Remove the damaged pin and seat the new pin fully; reuse original fastener/hardware if applicable
• Verify the shelf or bin sits securely before restoring power

The Overload PTCR Combo is an OEM part for GE refrigerators. This assembly includes both the start relay and the overload. The start relay is responsible for providing an extra boost of power to kick-start the compressor, while the overload acts as a safety mechanism to protect the compressor from electrical overload. Together, they help maintain cooling and prevent damage to the compressor.

A bad start relay and overload combo can occur due to electrical malfunctions or wear and tear over time. If you notice symptoms such as the refrigerator not cooling properly, unusual noises coming from the compressor, or the compressor not starting at all, it may be time to replace the combo.

Symptoms of a bad start relay and overload combo include:

• Inadequate cooling in the refrigerator
• Unusual noises coming from the compressor
• Failure of the compressor to start

Restore the proper function of your GE refrigerator's compressor by replacing the faulty start relay and overload combo with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Manifold & Housing are OEM components specifically designed for GE refrigerators. This part includes both the manifold which distributes water and the outer housing that protects it. 

The manifold & housing work together to deliver filtered water to the refrigerator's dispenser and ice maker. It is responsible for efficiently directing water flow and ensuring reliable operation of components that require water. 

Symptoms of a bad manifold & housing include:

• Low water pressure at the dispenser 
• Streaking or staining around water line connections
• Ice maker or dispenser malfunctions due to lack of water
• Dripping or leaks from manifold or housing areas

This OEM GE part is specifically designed to fit your model fridge. It is also compatible with Hotpoint, RCA, and some Kenmore models for a factory fit and like-new performance.
 

The Stainless Steel Door Handle Kit is an OEM replacement part for GE refrigerators. It is designed to replace the existing door handles to improve the appearance and function.

Causes of a bad door handle can include normal wear and tear over time or accidental damage. If you notice cracks, discoloration, or any other damage to the handle, it is recommended to replace it with this genuine OEM part.

Symptoms of a faulty door handle include:

• Difficulty in opening or closing the refrigerator door
• Loose or wobbly handle
• Chips, scratches or worn-out appearance

Color: Stainless Note: Includes all 3 handles for French Door model.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement air tower assembly is the vertical duct that channels chilled air through the refrigerator compartment. Replacing a damaged tower restores proper airflow to help maintain even temperatures and consistent cooling from top to bottom.

• Directs cold air from the evaporator to vents in the fresh food section
• Helps balance temperatures and reduce warm spots
• Often replaced when the original is cracked, broken, or warped
• Common symptoms: weak airflow from refrigerator vents and uneven cooling in the fresh food compartment

• Disconnect power to the refrigerator before servicing.
• Remove shelves and bins for access; release tabs or remove screws securing the old tower.
• Transfer any clips or sensors from the original, if present; seat and secure the new tower.
• Restore power and verify airflow from the vents.

This freezer door gasket forms an airtight seal between the freezer door and cabinet. Replacing a worn seal helps keep cold air in, reduce frost and condensation, and support consistent freezer temperatures.

• Seals the door perimeter to prevent warm air leaks
• Helps maintain stable internal temperature and humidity
• Reduces frost/ice buildup and moisture around the opening
• Common symptoms of failure: torn or warped gasket, poor door seal, frost along edges, temperature fluctuations

• Unplug the refrigerator before starting; open the freezer door
• Warm the new gasket with warm water or a hair dryer on low to relax it for easier installation
• Seat the corners first, then press the gasket evenly into the channel/retainer and ensure uniform contact around the perimeter
• Perform a paper-slip test and allow the gasket to conform after closing the door for several hours