Gne27jsmdfss Parts

The Slide Basket Lower Fz is an OEM part for GE freezers. This slide is responsible for smoothly gliding the freezer basket or drawer in and out, allowing for easy access and organization of frozen food items. It ensures that the freezer basket or drawer operates smoothly, making it effortless to retrieve items and maximize storage space.

A bad lower basket or drawer slide can occur due to wear and tear, damage, or other internal malfunctions. If you notice symptoms such as difficulty in sliding the freezer basket or drawer, sticking or jamming, or the basket or drawer not staying securely in place, it may be time to replace the slide.

Symptoms of a bad slide include:

• Difficulty in sliding the freezer basket or drawer
• Sticking or jamming of the basket or drawer
• Basket or drawer not staying securely in place

Restore organization to your GE freezer by replacing the faulty drawer slide with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This condenser fan mounting bracket secures the condenser fan motor and blade in the correct position to move air across the coils. Replacing a cracked or bent bracket restores stable mounting, reduces vibration, and helps maintain proper condenser airflow.

• Holds the condenser fan motor/blade assembly in alignment for proper airflow through the condenser
• Maintains clearance to prevent the fan blade from rubbing or contacting nearby components
• Helps reduce rattling, vibration, or scraping noises from the rear of the refrigerator
• Damage or misalignment can contribute to restricted condenser airflow and warmer temperatures

• Disconnect power and pull the refrigerator away from the wall to access the rear service area
• Remove the rear lower access panel; note wiring and hardware locations
• Support the fan motor/blade while removing the old bracket; transfer motor, blade, grommets, and screws to the new bracket
• The fan spins freely with proper clearance and correct airflow direction before reassembly

The Cold Water Tank is an OEM replacement part for GE refrigerators. This tank is responsible for storing and supplying cold water to the dispenser, keeping it cool and ready for dispensing. 

A bad cold water tank can occur due to regular use or accidental damage. If you notice symptoms such as lukewarm or room temperature water coming from the dispenser, reduced water flow, or leaks around the tank area, it may indicate a need to replace this part.

Symptoms of a bad cold water tank include:

• Lukewarm or room temperature water from the dispenser
• Reduced water flow or weak water pressure
• Leaks or drips around the tank area

Restore your refrigerator by replacing the faulty cold water tank with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

8-18 CA HX 1/2 S

This wire freezer upper basket restores organized storage in the freezer upper compartment so frozen foods stay contained and easy to access. It replaces a missing or damaged upper basket to improve usable space and convenience. What it does:

• Provides a dedicated storage bin for frozen foods to keep items contained and organized
• Fits into the freezer's upper basket location to replace a cracked, bent, or missing basket
• Prevents items from falling through shelves or shifting during normal use
• Matches the OEM basket shape and mounting points for proper fit on compatible freezers

• Disconnect power to the appliance or unplug the refrigerator before servicing.
• Remove food and any nearby shelves or drawers, then install the basket into the existing supports or rails where the factory basket sat.
• Handle edges carefully and wear gloves if metal edges are sharp; do not force the basket into place.

This hinge cover screw fastens the hinge cover in place, helping keep it secure and protecting the hinge components beneath. Replace a missing or stripped screw to stop the cover from loosening or rattling.

• Secures the hinge cover to the door/cabinet hinge
• Helps protect hinge hardware and wiring under the cover
• Replaces stripped, rusted, or missing hardware
• Common symptoms: loose or missing hinge cover, vibration or rattling at the hinge area

• Disconnect power to the appliance before servicing near the hinge area
• Use the correct screwdriver; start threads by hand to avoid cross-threading
• Align the cover properly and tighten snugly—do not overtighten to prevent stripping
• Keep the door closed during work to minimize movement

This stand off is a small mounting spacer that secures and spaces internal components, restoring proper alignment and reducing panel movement or vibration for quieter, more reliable operation. What it does:

• Provides a solid mounting point to hold panels, brackets or wiring harnesses in place.
• Replaces broken, cracked or missing standoffs that allow components to shift or rub.
• Helps stop rattling, buzzing or misalignment caused by loose mounting points.
• Keeps proper clearance between parts to prevent wear or chafing over time.

• Disconnect power to the appliance before starting any repair.
• Remove the affected panel or access cover to reach the damaged standoff.
• Replace the old standoff with the new part; retain and reuse any existing screws or fasteners unless damaged.
• Hand-tighten mounting hardware and test the appliance; avoid overtightening plastic standoffs.

This cup fill is the molded water cup that directs water into the refrigerator ice maker so it forms full, even ice cubes. It replaces a cracked or clogged cup to restore normal ice maker fill performance. What it does:

• Channels the incoming water supply into the ice maker mold for consistent cube formation
• Helps prevent leaks or overflows caused by cracked, split, or misshapen cups
• Common fix when the ice maker fills slowly, unevenly, or not at all
• Works with compatible GE ice maker assemblies that use a molded fill cup

• One cup fill

• Disconnect power and shut off the water supply before starting work
• Remove the ice maker assembly or access panel per your model's service instructions
• Inspect surrounding seals and the inlet area; replace if cracked or damaged
• Reconnect water and power, then run a few cycles to check for leaks

8-18 hi/lo 5/8

This right-hand top hinge assembly secures and supports the refrigerator door at the cabinet top, restoring proper door alignment and smooth opening. It's a direct-fit replacement when the upper hinge is cracked, bent, or worn. What it does:

• Supports the upper corner of the door and maintains correct door alignment
• Helps the door open and close smoothly and stay level
• Prevents door sagging that can cause gaps, rubbing, or poor sealing
• Replaces damaged, bent, or broken top hinge hardware that can cause noisy operation

• Disconnect power to the appliance before starting and remove any items from the door
• Support or remove the door per manufacturer instructions before loosening hinge fasteners
• Use proper hand tools and tighten fasteners securely; check door alignment and gasket seal after installation

The Lower Cabinet Harness is an OEM replacement part for GE refrigerators responsible for providing electrical connections between various components within the lower cabinet of the refrigerator.

A bad lower cabinet harness can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as intermittent or complete loss of power to components within the lower cabinet, flickering lights, or malfunctioning controls, it may indicate a need to replace the wiring harness.

Symptoms of a bad lower cabinet harness include:

• Intermittent or complete loss of power to components within the lower cabinet
• Flickering lights or erratic behavior
• Malfunctioning controls or display

Restore your refrigerator by replacing the faulty lower cabinet harness with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This LED light board assembly provides the replacement LED module that illuminates the control/display area. Restores visibility of panel indicators and display lighting for proper operation and ease of use. What it does:

• Replaces the LED light module that backlights the control/display area and status indicators.
• Restores faded or non-lit control panel lighting that makes buttons and icons hard to see.
• Can resolve intermittent or no-light symptoms caused by a failed LED board.
• Works with the original housing and connectors for a direct-fit replacement.

• One LED light board assembly as shown

• Disconnect power to the appliance before starting any repair to avoid shock.
• Handle the board by edges; avoid touching LED lenses or circuitry to prevent damage.
• Verify connector orientation and seating; secure mounting screws to prevent rattle.

This leveling screw threads into the refrigerator's leveling leg or adjuster bracket to raise or lower the cabinet. Replacing a stripped or missing screw restores stable footing and helps keep doors aligned for proper sealing.

• Provides threaded height adjustment of the leveling leg/roller bracket
• Helps stop rocking or wobbling that can cause vibration and rattling
• Aids in door alignment so doors close and seal properly
• Replace if threads are stripped, screw is bent, seized, or missing

• Disconnect power and turn off the water supply before servicing
• Protect flooring; with assistance, carefully tip the appliance slightly to relieve weight from the adjuster
• Remove the damaged screw; hand-start the new screw to avoid cross-threading, then adjust until level
• Verify the cabinet is stable and doors operate correctly before restoring power

The Evaporator Cover and Fan is an OEM replacement part for GE refrigerators responsible for maintaining proper airflow and temperature regulation within the refrigerator's freezer compartment. The fan helps distribute the cold air while the cover protects the evaporator coils from any damage or obstruction.

A bad evaporator cover and fan can occur due to wear and tear, damage, or component failure over time. If you notice symptoms such as inconsistent cooling, excessive frost or ice buildup, or unusual noises coming from the freezer, it may indicate a need to replace the evaporator cover and fan.

Symptoms of a bad evaporator cover and fan include:

• Inconsistent cooling
• Excessive frost or ice buildup
• Unusual noises coming from the freezer

Restore your refrigerator by replacing the faulty evaporator cover and fan with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Pcb Asm Humidity Board is an OEM part for GE refrigerators. This humidity control board regulates the humidity levels within the refrigerator's crispers or drawers. It allows you to adjust and maintain the ideal humidity level for different types of produce, extending their shelf life and preserving their quality.

Symptoms of a bad humidity control board include:

• Inconsistent humidity levels
• Excessive moisture buildup
• Rapid spoilage of produce

A bad humidity control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as inconsistent humidity levels, excessive moisture buildup, or produce spoiling quickly, it may be time to replace the humidity control board.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This drawer bracket secures and supports a refrigerator drawer, keeping it aligned and stable for smooth opening and closing. A direct-fit replacement that restores proper drawer function and prevents sagging or misalignment. What it does:

• Supports and stabilizes the drawer to maintain proper alignment
• Keeps the drawer track engaged for smooth sliding action
• Prevents the drawer from sagging or detaching when loaded
• Helps stop rattling or uneven movement caused by a damaged bracket

• Disconnect power to the appliance before beginning any repair
• Remove drawer contents and slide out the drawer to access the bracket area
• Inspect mounting points and hardware; replace any worn screws or clips as needed
• Tighten fasteners securely but avoid over-torquing to prevent damage