Gne27jymtffs Parts

The Quick Space Shelf is an OEM part for GE refrigerators. It sits on sliding tracks and provides an adjustable shelving solution inside the fresh food compartment. 

Symptoms of a bad Quick Space Shelf include:

• Difficulty sliding smoothly along trackways due to dirt, grime, or misalignment
• Instability or sagging from broken plastic shelf supports  
• Shelving tracks that fail to keep the shelf locked into position

Causes of failure can be normal wear and tear over time, accidental impacts, or overloading beyond its weight capacity. Trapped debris may also interfere with proper functionality.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Glass Shelf is an OEM replacement part for GE refrigerators. It provides storage space for refrigerated items on a temperature-controlled surface. 

Causes of a bad glass shelf can include chips or cracks from repeated loading/unloading of items, sagging or bowing from long-term weight pressure, or damage due to impacts within the refrigerator.

Symptoms of a bad glass shelf include:

• Items falling through shelf or sliding off surfaces  
• Visible fractures, chips, or broken glass
• Shelf sagging low or bowing up in the middle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Restore a solid, comfortable grip on your bottom freezer drawer. Replacing a worn or damaged handle improves everyday usability and refreshes the refrigerator's stainless appearance.

• Provides a sturdy handhold to open and close the freezer drawer
• Replaces cracked, loose, or missing handle; restores look and function
• Helps resolve wobbling or difficulty opening due to a compromised handle
• Attaches to the freezer drawer front using existing mounting hardware on applicable models

• Disconnect power and protect surrounding surfaces before starting.
• Remove the old handle and retain existing mounting hardware for reuse.
• Align the new handle with the mounting studs/brackets and tighten fasteners until secure—do not overtighten.
• Check drawer operation and handle stability after installation.

The Ice maker is an OEM component for GE side-by-side refrigerators featuring an internal ice production system. Precisely engineered to harvest cubes and eject them for convenient access, it provides invaluable functionality. A reliable ice supply relies on a functioning ice maker.

Causes of failure often relate to the wearing of plastic gears and rollers over extended use, water damage causing sensor degradation over time, or mineral buildup limiting water and energy delivery.   

Symptoms include:

• Reduced or ceased ice production even when the refrigerator was cooling properly  
• Clumped ice clogs rather than individual cubes dispensing
• Strange noises or vibrations coming from the ice compartment  

Replacing with this genuine GE icemaker restores a workhorse feature through precise component integration and resilient materials selection. Compatible replacements suit Hotpoint, RCA, or Kenmore units.

The Ice Bucket is an OEM part for GE freezers. This part is specifically designed to store ice cubes, providing a convenient solution for keeping your drinks cool and refreshing. This ice bucket ensures proper storage and easy access to ice whenever you need it. It is made of high-quality materials that can withstand the freezing temperatures of your freezer and the daily demands of ice storage.

A bad ice bucket can occur due to accidental damage, wear and tear, or other factors. If you notice symptoms such as cracks, leaks, or difficulty in accessing the ice from your current bucket, it may be time to replace it with a new one.

Symptoms of a bad ice bucket include:

• Cracks or damage
• Leaks or drips
• Difficulty accessing ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Tube Lead is an OEM part for GE refrigerators. It is responsible for routing water through the unit.

Causes of a bad tube lead can include mineral accumulation restricting flow, loosened compression fittings, or cracked/split tubing exposing water to air.

Symptoms of an issue with the water line tube lead include:

• Slow or inconsistent water and ice production
• Water pressure or temperature fluctuations at the dispenser
• Leaks in the refrigerator's exterior bottom panel

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

RFID board that reads the filter's RFID chip and communicates with the refrigerator control to manage filter status and water dispensing. Replacing a failed board restores proper filter recognition and allows dispensing when a valid filter is installed.

• Reads/authenticates RFID-enabled water filters and reports status to the main control
• Enables or disables water dispensing based on filter presence/validity
• Supports filter-life tracking and "replace filter" indications on the display
• Failure symptoms include "filter not detected," replace light won't reset, or no water dispense after a filter change

• Disconnect power before service; shut off water if working around the filter/housing
• Access the board near the filter area; note connector orientation; transfer any mounting clips/covers as needed
• Handle electronics by the edges and use ESD precautions
• Restore power, install a compatible RFID-enabled filter, and dispense water to confirm recognition and flow

This support pin restores secure support for interior components in your refrigerator, helping shelves or bins stay aligned and level. Replace a worn or missing pin to stop wobble and keep stored items stable.

• Provides a mounting point for a refrigerator shelf, bin, or bracket
• Helps keep components aligned and prevents sagging or dropping
• Replaces a broken, worn, or missing pin
• Common symptoms: shelf/bin tilts, won't stay in place, or pin is visibly damaged

• Disconnect power and remove items from the area before servicing
• Note the orientation of the original pin to match during reinstallation
• Remove the damaged pin and seat the new pin fully; reuse original fastener/hardware if applicable
• Verify the shelf or bin sits securely before restoring power

This full-width drawer cover sits above the lower refrigerator drawer to create a flat shelf surface and support the drawer below. Replacing a cracked frame or broken glass restores storage capacity and smooth, reliable drawer operation.

• Forms the shelf surface above the full-width pantry/deli drawer
• Supports stored items and helps maintain proper spacing in the fresh food section
• Provides support so the drawer slides and aligns correctly
• Replace if the glass is broken, the frame is cracked, the shelf sags, or the drawer binds/misaligns

• Unplug the refrigerator before starting.
• Remove the full-width drawer; lift the old cover straight up off its side supports. Handle glass carefully.
• Set the new cover onto the supports and ensure it is fully seated; reinstall the drawer.
• Restore power and verify smooth drawer movement.

This freezer door gasket forms an airtight seal between the freezer door and cabinet. Replacing a worn seal helps keep cold air in, reduce frost and condensation, and support consistent freezer temperatures.

• Seals the door perimeter to prevent warm air leaks
• Helps maintain stable internal temperature and humidity
• Reduces frost/ice buildup and moisture around the opening
• Common symptoms of failure: torn or warped gasket, poor door seal, frost along edges, temperature fluctuations

• Unplug the refrigerator before starting; open the freezer door
• Warm the new gasket with warm water or a hair dryer on low to relax it for easier installation
• Seat the corners first, then press the gasket evenly into the channel/retainer and ensure uniform contact around the perimeter
• Perform a paper-slip test and allow the gasket to conform after closing the door for several hours

The Damper Assembly is an OEM component specifically designed for GE refrigerators. This assembly is located within the fresh food compartment and functions to control airflow and temperature regulation. 

The damper works with the evaporator fan to carefully moderate circulating air, preventing cold spots and optimizing equal cooling. Consistent temperatures extend the shelf life of perishable goods. 

Causes of a faulty damper assembly can include failure of the plastic gears or axle that coordinate its movements over time. Improper air circulation disrupts the refrigerator's performance.

Symptoms include: 

• Formation of frost or ice buildup in problem areas  
• Inconsistent shelf temperatures from top to bottom
• Foods spoiling more quickly 

This replacement assembly from GE restores dependable temperature control. Upgrade today for continued fresh food preservation abilities matching OEM standards. It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This French-door refrigerator door gasket in Dorian Gray seals the fresh food door to the cabinet, helping keep cold air in, reduce moisture, and maintain stable temperatures for reliable food preservation.

• Creates a tight seal between the refrigerator compartment door and frame on French-door models
• Helps maintain correct internal temperature and reduce air leaks
• Replaces a torn, cracked, shrunken, or warped gasket
• Common symptoms: visible gaps or light around the door, door not sealing, condensation or frost at the door, or temperature fluctuations

• Disconnect power before servicing.
• Let the new gasket warm to room temperature; use warm water or low heat to relax any folds.
• Clean the door channel; seat the gasket corners first, then press the lip fully into the retainer all the way around.
• Close the door and check for even contact; use gentle heat to fine-tune the seal as needed.

Restore lost shelf space on your refrigerator door. This fresh food door bin replaces the lower bin, providing secure storage for bottles and condiments and snapping into the door tabs to keep items upright and accessible.

• Provides organized storage in the lower position of the fresh food door
• Attaches to molded door tabs for a secure, stable fit
• Replace if cracked or broken
• Helps prevent items from tipping or falling when the door opens and closes

• Disconnect power and remove items from the affected door area before starting
• Lift the old bin straight up and out of the door tabs
• Align the new bin with the tabs and press down evenly until fully seated—do not force
• Verify the bin is level and secure before reloading items

The Stainless Steel Refrigerator Handle is an OEM component specifically designed for GE refrigerators.

Symptoms of a bad refrigerator handle can include:

• Difficulty opening or closing the refrigerator door  
• Looseness, wobble or excess play in the handle mechanism
• Cracking, breaking or other visible damage to plastic parts
• Protruding sharp edges or rust developing on metal surfaces

Causes of a bad refrigerator handle can include normal wear and tear over years of repeated opening and closing use. Exposure to moisture or accidental impacts may also damage plastic or metal components.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Size: 10-32 GXTT FLP.595 S

This DC evaporator fan motor moves air across the evaporator coils and circulates chilled air throughout the compartments. Replacing a failing motor restores proper airflow to help maintain even temperatures and reduce frost buildup. What it does

• Circulates air across the evaporator to distribute cold air through the refrigerator and freezer
• Helps maintain stable temperatures and supports proper defrost performance
• Common symptoms of a failing motor include no or weak airflow, fan not running, loud or intermittent fan noise, frost/ice on the rear panel, or freezer cold while fresh food is warm

• 1 DC evaporator fan motor

• Disconnect power to the appliance before servicing
• Remove shelves/drawers and the evaporator cover to access the fan area
• Note wire/connector orientation; transfer the fan blade and mounting hardware from the old motor if your model uses separate parts
• Ensure the blade spins freely with proper clearance before restoring power and verifying airflow