Gne27jymtffs Parts

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This condenser fan and housing assembly circulates air across the condenser coils to help your refrigerator dissipate heat and run efficiently. Replaces a damaged or worn housing and fan to restore proper airflow and cooling performance. What it does

• Moves air over condenser coils so the compressor can shed heat and maintain cooling
• Prevents overheating and helps the system run more efficiently
• Can stop loud fan noise, rattling, or reduced cooling when the fan or housing is damaged
• Restores correct airflow when the original housing is cracked, bent, or obstructed

• One condenser fan and housing assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing rear or bottom access panels; keep track of fasteners
• Handle sheet metal edges and fan blades carefully to avoid cuts and damage
• After installation, verify fan spins freely and recheck connections; confirm proper cooling

This top LED cover is the replacement light lens that protects and diffuses the refrigerator's top LED assembly for even interior lighting and a finished look. Replaces a cracked, yellowed, or missing lens to restore light distribution. What it does:

• Protects the LED module from dust, moisture, and impacts
• Diffuses and softens LED output for even interior illumination
• Prevents glare and visible hot spots from exposed LEDs
• Helps maintain a clean, finished appearance inside the appliance
• Can address symptoms like uneven lighting, visible LED bulbs, or a cracked/warped lens

• Disconnect power to the appliance before starting any work.
• Handle the lens gently to avoid scratching or cracking; wear gloves if needed.
• Removal/installation typically involves releasing retaining clips or removing a few screws—retain fasteners for reuse.
• Align the cover over the LED assembly and secure until it snaps or fasteners are tightened; test lighting after restoring power.

This switch actuator is the replacement lever that engages a refrigerator door/dispenser switch so controls respond reliably. It restores proper switch actuation to help items like lights, dispensers, or ice/water controls work correctly. What it does:

• Replaces a worn or broken actuator that fails to depress the switch plunger
• Allows the door or dispenser mechanism to trigger the switch reliably
• Helps resolve symptoms such as lights not turning on, dispenser or ice/water functions not responding, or intermittent switch behavior
• Works with the corresponding OEM door/dispenser switch assembly to restore normal operation

• One switch actuator

• Disconnect power (unplug or shut off breaker) before starting work
• Access may require removing the door panel or dispenser bezel; keep fasteners and trim organized
• Inspect the mating switch and surrounding parts for damage; replace the switch if the plunger is worn or broken

This duct air tower assembly directs cold air through the freezer/refrigerator cabinet to maintain even cooling and proper airflow. Replaces a damaged or cracked air tower to reduce warm spots and restore consistent circulation. What it does:

• Channels cold air from the evaporator into the cabinet, helping maintain uniform temperatures.
• Helps prevent localized warm spots and food spoilage caused by disrupted airflow.
• Restores proper defrost/airflow routing if the original duct is cracked, warped, or missing.
• Works with the evaporator/airflow system—symptoms include uneven cooling, frost buildup, or reduced airflow.

• One duct air tower assembly

• Disconnect power to the appliance before beginning any repair.
• Access requires removing interior panels/shelves—handle plastic parts gently to avoid cracking.
• Inspect mating seals and clips; replace any damaged fasteners for a secure fit.

This heater and wiring harness assembly supplies and routes power to the appliance's heating element so the unit produces heat reliably. Replacing a damaged harness restores safe electrical connections and proper heating performance. What it does:

• Provides the heater element with power and connects the element to the appliance wiring and controls
• Replaces frayed, burned, or broken wires that can cause intermittent or no-heat conditions
• Restores proper electrical continuity to prevent overheating or arcing at damaged terminals
• Helps resolve symptoms like no heat, intermittent heating, visible burn marks on wires, or tripped thermal cutouts

• Disconnect power (and gas supply if applicable) before starting any repair.
• Inspect the heater element, thermal fuse, and connectors while replacing the harness; replace any damaged components per OEM guidance.
• Use exact OEM part number match and secure all connectors; loose connections can cause arcing or failure.

This stop door closes the refrigerator dispenser opening to help keep cold air in and protect the dispenser area from debris. Replacing a damaged stop door restores proper sealing and smooth dispenser operation. What it does:

• Seals the dispenser opening when not in use to reduce cold-air loss
• Helps prevent debris and pests from entering the dispenser chute
• Works with the dispenser actuator/lever to open and close the door during dispensing
• A worn or broken stop door can cause visible gaps, drafts, or debris falling into the dispenser

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser bezel or inner liner panels
• Handle the door carefully to avoid scratching or breaking the mounting tabs
• Verify proper alignment and actuator engagement before reassembling

This drawer bracket secures and supports a refrigerator drawer, restoring proper alignment and smooth operation. Replace a broken or cracked bracket to prevent sagging drawers and ensure contents slide correctly. What it does:

• Supports the drawer assembly and keeps the drawer level during opening and closing
• Restores proper drawer alignment when original bracket is cracked or damaged
• Prevents drawer sagging or binding that can catch or stick
• Helps maintain smooth sliding and proper engagement with the drawer track

• One drawer bracket

• Designed for direct replacement; remove drawer and any trim to access mounting location
• Compare the part to the original before installation to confirm orientation and screw hole alignment
• Use appropriate hand tools; do not force the bracket to avoid cracking adjacent plastic parts
• Disconnect power only if accessing components where electrical parts could be disturbed