Gne29gmkes Parts

This screw set replaces worn or missing fasteners used on the freezer door assembly to restore secure attachment of door components. Ideal for fixing loose panels and reducing rattling so the door sits and seals properly. What it does:

• Secures freezer door components and trim to the door assembly.
• Restores proper fit and alignment when screws are corroded, stripped, or missing.
• Helps eliminate door rattles and loose panels that can affect door seating.
• Matches OEM fastener type and lengths used on the freezer door assembly.

• Screw set for freezer door

• Disconnect power and empty the door area before starting work.
• Use the correct screwdriver or bit to avoid stripping heads; install screws until snug—do not overtighten.
• Keep removed parts in order and follow OEM instructions for reassembly.

This is a replacement #8-18 by 1/2-inch appliance screw used to secure panels, trim, and internal components. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and small components
• Restores secure mounting when a screw is missing or worn
• Stops rattling and vibration caused by loose or stripped fasteners
• Compatible with applications that call for a #8-18 x 1/2" screw

• One screw (8-18 x 1/2 in)

• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; stop when the component is snug to prevent damage
• If screw threads are damaged, replace with the correct thread size rather than forcing
• Disconnect power before working on electrical components or panels that expose wiring

This trough drain collects and channels defrost water from the freezer evaporator to the drain tube, helping prevent pooled water and icing in the freezer compartment. Designed to match OEM fit and function for a direct replacement. What it does

• Captures defrost meltwater from the evaporator area and directs it to the drain system
• Helps prevent water pooling and ice buildup around the evaporator and freezer floor
• Restores normal defrost drainage when original trough is cracked, warped, or clogged
• Works with the freezer's drain heater and drain tube to keep water flowing during defrost cycles

• One trough drain

• Remove power to the appliance before accessing the evaporator/freezer cavity
• Replacement may require partial disassembly of interior liners, shelves or evaporator cover; follow OEM service instructions
• Inspect and clear the drain tube and drain heater when replacing the trough to ensure full system function

This guide roller is the replacement wheel that supports and guides the refrigerator vegetable/crisper pan, helping the drawer slide properly and stay aligned for reliable access. Designed to restore smooth, stable drawer movement. What it does:

• Supports the vegetable/crisper pan and rides in the drawer track to keep the drawer aligned.
• Reduces binding or catching when opening and closing the drawer.
• Replaces worn or broken rollers that cause the drawer to tilt, jam, or make scraping noises.
• Helps maintain even weight distribution so the drawer opens and closes reliably.

• Disconnect power to the refrigerator before beginning any repair.
• Remove the vegetable/crisper pan/drawer to access the roller and replace the old roller with the new one.
• Use basic hand tools as required; follow OEM instructions for reassembly.

This gasket seals the fan-front housing in the appliance to help maintain proper airflow and reduce air bypass. Replacing a worn gasket restores a tight seal for more consistent cooling and quieter operation. What it does:

• Seals the fan/front housing to prevent air leakage that can disrupt airflow and cooling
• Cushions the fan assembly to help reduce vibration and noise caused by a loose or damaged seal
• Helps maintain proper circulation so the refrigeration system can run efficiently
• Can prevent moisture buildup and reduce frost in the fan area when sealing is restored

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove access panels or shelving as needed to reach the fan housing; keep hardware for reassembly
• Inspect the mating surfaces and clean away debris before installing the new gasket for a proper seal
• Repair those before installing the gasket

This cover connector secures the fan housing and wiring in the refrigerator's fan assembly, helping protect components and maintain proper airflow. It's a direct-fit replacement designed to restore correct fan enclosure alignment. What it does

• Holds the fan housing and wiring connectors in place to prevent rubbing or disconnection
• Protects fan assembly wiring from damage and helps maintain reliable airflow
• Can address symptoms such as intermittent fan operation, unusual fan noise from misalignment, or airflow-related cooling issues
• Works as part of the fan enclosure to keep components positioned for proper function

• Disconnect power before beginning any service to avoid shock or injury
• Installation typically requires removing the fan housing or access panel; handle plastic parts carefully to avoid breaking tabs
• Inspect adjacent wiring and fan blades for damage while replacing the connector

2 wire insulator.

A short 8-32 x 3/8 hex washer head screw used to secure small appliance panels and components. Simple replacement for stripped or missing fasteners to restore proper fit and prevent rattles or loose parts. What it does:

• Secures panels, brackets, and small assemblies in place
• Helps eliminate vibration-related noise from loose parts
• Replaces missing, damaged, or corroded screws to restore proper alignment
• Fits standard 8-32 threaded holes requiring a 3/8" length screw

• One 8-32 x 3/8 hex washer head screw

• Use the correct 8-32 driver to avoid stripping the head
• Tighten snugly but avoid over-torquing to prevent thread damage
• Disconnect power and follow appliance safety procedures before accessing internal components
• Replace only like-for-like fasteners in load-bearing or safety-critical locations

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

A 1/4" clip connector that secures a quick-disconnect terminal to appliance wiring for a reliable electrical connection. Replaces worn or loose connectors to restore consistent contact at spade terminals. What it does:

• Provides a secure spade/quick-disconnect connection between wires and component terminals
• Restores power to components when original connector is corroded, cracked, or loose
• Helps prevent intermittent operation caused by poor terminal contact
• Designed for use on appliance wiring where 1/4" quick-disconnects are required

• One 1/4" clip connector

• Always disconnect power to the appliance before inspecting or replacing electrical connectors
• Remove the old connector and ensure wire size and terminal type match this 1/4" connector before installing
• Fully seat the terminal and ensure a snug, non-wobbly fit; avoid forcing mismatched terminals
• If wiring is damaged, replace or repair the wire per the manufacturer's service instructions

This left-side support secures and stabilizes the refrigerator door/side assembly for proper alignment and function. Replacing a worn or damaged support helps reduce door sag, improve sealing, and stop rubbing or unusual noises. What it does:

• Supports the left side of the door/side assembly to maintain proper alignment
• Prevents door sag that can cause poor sealing or uneven closing
• Reduces rattling or rubbing caused by a loose or broken support
• Restores proper fit to help the gasket seal and temperature control

• Disconnect power and empty the door area before starting any repair
• Follow OEM instructions for door removal/realignment; some screws/fasteners must be removed and re-torqued
• Handle adjacent trim or glass carefully to avoid damage

This cover harness is the factory-style electrical connector assembly that links components behind the appliance cover, restoring secure, routed wiring and reliable connections for proper operation. What it does:

• Provides factory routing and secure electrical connections between controls and internal components
• Replaces damaged, frayed or corroded wiring that can cause intermittent operation
• Helps prevent loose terminals and arcing that may lead to component failures
• Used when cover-mounted connectors or wiring no longer seat or pass power reliably

• One cover harness

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle wiring and terminals carefully; do not force connectors—align and seat fully
• Route harness as original, using existing clips and fasteners to avoid pinching or chafing

This ground harness is a factory-style wire assembly that provides a safe electrical return path to reduce shock and interference risks. It restores proper grounding for affected appliance circuits and helps maintain safe operation. What it does:

• Connects appliance metal chassis/components to the ground system to prevent stray voltage and reduce shock risk
• Provides the ground path for control boards and other electrical components to function correctly
• Common symptom: appliance shows electrical faults, intermittent operation, or visible arcing at connection points
• Used when original ground wire is damaged, corroded, or has a failed connector

• One ground harness (wire assembly) as pictured

• Always unplug the appliance or disconnect power at the breaker before starting work
• Match connector types and routing to the original harness; secure all fasteners and strain reliefs
• Inspect mounting points and mating terminals for corrosion; replace fasteners if damaged

This LED jumper harness connects LED lights and lighting assemblies to the fridge's wiring, restoring reliable power and signal to LED circuits. It's a direct-replacement wiring jumper for lighting systems that need a damaged or worn harness replaced. What it does:

• Transfers power and signal between LED modules and the appliance wiring harness
• Replaces damaged, frayed, or corroded jumper wiring that can cause flickering or loss of light
• Helps restore consistent interior or dispenser lighting when the LED circuit is interrupted
• Maintains OEM routing for correct fit and connector alignment

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Handle connectors carefully; align and seat plugs fully but avoid excessive force.
• Route the harness away from sharp edges, hinges, and moving parts; secure with existing clips or ties.

This door harness with switch completes door-open/close circuits so door-activated functions work reliably and the interior light responds properly. It replaces a worn or damaged door switch harness to restore normal operation. What it does:

• Provides the wiring and switch that detects door open/closed position
• Restores proper operation of interior light and other door-activated functions
• Replaces frayed, broken, or intermittently working door harnesses
• Helps stop lights from staying on or failing to turn on when the door opens

• Disconnect power to the appliance before beginning work
• Handle connectors and wiring gently to avoid damage
• Access typically requires removing the door panel or liner; retain fasteners for reassembly