Gne29gmkes Parts

This right-hand vegetable pan assembly replaces a cracked or damaged crisper pan so produce stays supported and drawers slide smoothly. It restores the refrigerator's storage area for fruits and vegetables. What it does:

• Supports and contains produce in the right-side crisper area to prevent items from falling into lower compartments.
• Provides a flat, stable surface so the associated drawer slides and seats correctly.
• Stops leaks or pooling caused by cracks or breaks in the original pan.
• Helps eliminate drawer binding or uneven alignment when the pan is damaged.

• Remove food and the crisper drawer before replacing the pan; reinstall drawer carefully to ensure proper seating.
• No special tools typically required; slide or snap the pan into the existing tracks per the fridge's hardware layout.
• Inspect surrounding rails and stops for damage; replace any broken hardware before installing the new pan.
• Handle edges carefully and recycle the old part according to local regulations.

The Pcb Asm Humidity Board is an OEM part for GE refrigerators. This humidity control board regulates the humidity levels within the refrigerator's crispers or drawers. It allows you to adjust and maintain the ideal humidity level for different types of produce, extending their shelf life and preserving their quality.

Symptoms of a bad humidity control board include:

• Inconsistent humidity levels
• Excessive moisture buildup
• Rapid spoilage of produce

A bad humidity control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as inconsistent humidity levels, excessive moisture buildup, or produce spoiling quickly, it may be time to replace the humidity control board.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This left-hand door side assembly is the cabinet-mounted control panel support that secures the refrigerator's control and user-interface components for reliable operation and a finished door appearance. What it does:

• Provides the left-side mounting and housing for the fridge control panel and associated switches
• Keeps control components aligned and secured to the door for consistent operation
• Restores proper fit and finish when the original door-side control housing is cracked, loose or damaged
• Can help resolve symptoms like a loose control panel, rattling at the door edge, or exposed electronics

• One left-hand door side control assembly

• Disconnect power to the appliance before starting work to avoid electrical shock
• Remove door panels or trim as needed to access mounting screws; keep hardware for reassembly
• Align assembly carefully and tighten fasteners snugly but do not overtighten plastic threads

This left-side condenser bin holds and protects the refrigerator condenser assembly, keeping airflow pathways clear for efficient cooling and helping prevent debris contact. It's a direct-fit replacement that restores proper condenser support and clearance. What it does

• Secures and positions the condenser coil/assembly to maintain correct airflow
• Shields the condenser from debris that can reduce cooling efficiency
• Prevents condenser contact with other components that can cause rubbing or noise
• Common symptoms: loud/rattling noises near the base, damaged or loose plastic housing, or reduced cooling performance linked to condenser obstruction

• Disconnect power before servicing to avoid electrical shock.
• Handle plastic parts carefully to avoid cracking; confirm clips and mounting tabs align before fastening.
• Use basic hand tools; keep small fasteners organized to prevent loss.

This left-side lower freezer slide restores smooth drawer movement and proper alignment in the freezer compartment. It replaces a worn or damaged slide to help the drawer open and close reliably. What it does:

• Replaces the left lower freezer drawer slide that guides the drawer on its track
• Restores smooth, even sliding and prevents the drawer from sticking or binding
• Helps keep the drawer properly aligned so it opens and closes without catching
• Useful when the existing slide is bent, cracked, or worn and affects drawer operation

• Disconnect power and remove food from the drawer area before starting
• Typically installs onto the freezer cabinet and drawer track; basic hand tools may be required
• Align slide with factory mounting points and secure hardware; test drawer movement after installation

Size: 8 - 18 ab.

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion

This 1/4-20 hex washer head screw secures panels and components in place, restoring proper fit and eliminating movement. It fits common appliance assemblies that use a 7/8" long, 1/4-20 threaded fastener. What it does:

• Fastens panels, brackets, and assemblies that use a 1/4-20 thread
• Restores secure fit when original screw is missing, stripped, or loose
• Helps stop rattling, vibration, and misalignment caused by loose hardware
• Matches common OEM head style for tool-ready installation with a socket or wrench

• Disconnect power to the appliance before servicing where applicable
• Use the correct 1/4-20 socket or wrench; install hand-tight then snug—do not overtighten
• Replace like-for-like: head style, thread size, and length before installing
• If fastener holes or threads are damaged, repair or retap before reuse

A left-hand closure door assembly that replaces a worn or broken door closure to restore proper sealing and smooth drawer/door operation. Helps stop drafts and keeps compartments closing correctly for reliable performance. What it does

• Guides and supports the left-side door/drawer as it closes to ensure proper alignment.
• Helps form a tight seal to reduce air leakage and maintain interior temperature.
• Prevents rattling or catching that can occur when the closure is damaged or worn.
• Commonly replaced when the door doesn't stay closed, binds, or leaves a visible gap.

• Disconnect power to the appliance before starting any repair.
• Basic hand tools are typically required; access may involve removing a drawer or trim panel.
• Handle parts carefully to avoid damaging surrounding panels or gaskets.

A left-hand hinge center assembly that secures the refrigerator door at the center hinge to restore proper support and alignment. Replaces a worn or damaged hinge center to reduce door sagging and improve smooth opening. What it does:

• Provides a stable pivot point at the door's center hinge for correct alignment and support.
• Helps stop door binding, uneven gaps, and rubbing by restoring proper hinge geometry.
• Transfers load between upper and lower hinge halves so the door closes and seals correctly.
• Designed as a direct-replacement service part matching OEM fit and function.

• Support the door before starting—remove or brace the door to prevent it from falling.
• Disconnect power to the appliance if working near electrical components or the light switch.
• Remove hinge fasteners and replace with the new hinge center; tighten hardware securely but do not over-torque.
• Check door alignment and operation after installation; adjust hinge mounting as needed for an even gap.

This damper controls airflow to the refrigerator vegetable/produce pan to help maintain proper humidity and cooling for fresh food. Replacing a worn damper restores balanced airflow and helps keep produce crisper. What it does:

• Opens and closes the vent to regulate cold air entering the vegetable/produce pan
• Helps maintain proper humidity and temperature in the crisper area
• Commonly used when produce becomes wilty or the fresh-food compartment cools unevenly
• Prevents overcooling or insufficient airflow to the crisper drawer

• Disconnect power to the appliance before attempting repair
• Remove shelves/drawers as needed for access; handle glass shelves carefully
• Verify damper orientation and secure mounting before reassembly

This left-side freezer holder slide secures and guides the freezer drawer for smooth opening and closing. Replacing a worn or broken slide restores proper drawer alignment and helps prevent sagging or sticking. What it does:

• Supports the freezer drawer on the left side and keeps it aligned during use
• Guides drawer movement for smooth opening and closing
• Replaces damaged, bent, or missing slides that cause binding or uneven drawer travel
• Helps prevent the drawer from sagging, slipping, or coming off its track

• Disconnect power before servicing to avoid electrical hazards
• Remove freezer contents and a drawer or panel as needed for access
• Compare the old slide to ensure correct left/right orientation before installing
• Use basic hand tools; do not force parts—replace any damaged mounting hardware

A replacement 1/4-20 screw that secures panels, brackets, and components on compatible appliances for reliable fit and safe operation. Use this fastener to restore proper assembly and reduce rattles or loose parts. What it does:

• Threads into 1/4-20 tapped holes to hold panels, braces, or hardware
• Restores secure attachment where a missing or stripped screw allowed panels or trim to shift
• Helps eliminate vibration noise caused by loose fasteners
• Matches OEM fit for correct alignment and clearance

• Disconnect power to the appliance before servicing to avoid electrical hazards
• Use the correct driver or socket to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten securely but do not overtighten
• Keep hardware and small parts away from children and pets

A hex washer-head screw that secures panels and components in household appliances, helping restore stable, rattle-free mounting. Ideal when a mounting screw is missing, stripped, or rusted. What it does:

• Fastens panels, brackets, and internal components with a 1/4-20 thread for secure connections
• Replaces missing or damaged screws that cause loose panels or vibration noises
• Restores proper alignment of parts to prevent rattling and wear
• Works where a hex washer-head profile is required for flush, locked seating

• One hex washer-head screw, 1/4-20 x 3/4

• Use the correct 1/4-inch hex or socket driver to avoid stripping the head
• Power off and unplug the appliance before accessing internal components
• Do not overtighten; snug until secure to avoid damaging threads or parts
• If screw threads are damaged, replace with the matching OEM part for best fit

This PEX water line provides a flexible, durable water supply connection for compatible appliances, restoring proper water delivery for dispensers and ice makers. It resists kinking and corrosion for reliable flow. What it does:

• Carries potable water from the household supply to the appliance water valve or dispenser.
• Restores water flow when the original line is cracked, pinholed, or damaged.
• Helps prevent leaks compared with brittle or corroded rigid tubing.
• Supports normal dispenser and ice maker operation when installed correctly.

• One PEX water line.

• Turn off and disconnect the water supply and power before starting work.
• Drain remaining water from the line and fittings to avoid spills.
• Use the correct fittings and follow manufacturer torque recommendations; hand-tighten then final snug with wrench.
• After installation, slowly restore water, check all connections for leaks, and test dispenser/ice maker operation.