Gne29gynbfs Parts

This left hinge top pin assembly secures and guides the refrigerator door at the upper hinge, helping maintain proper alignment and a tight door seal for reliable cooling performance. Designed to replace a worn or damaged top hinge pin. What it does:

• Provides the pivot point for the upper edge of the refrigerator door to open and close smoothly
• Restores correct door alignment to prevent sagging or uneven gaps
• Helps the door seat fully to maintain an effective seal and consistent internal temperature
• Reduces noise or binding caused by a worn or bent hinge pin

• Unplug the appliance or disconnect power before starting any repair
• Support the door securely (use a second person or proper support) before removing the hinge to prevent falls or damage
• Tighten hinge fasteners to the manufacturer's torque specifications when reinstalling
• If other hinge components appear worn or bent, inspect and replace as needed for proper function

This PCB cover assembly protects and secures a range of control electronics, keeping the control board safe from dust, debris and accidental contact. It restores the original housing and helps maintain reliable board operation. What it does:

• Shields the control PCB from moisture, crumbs and physical damage
• Helps prevent shorts caused by loose wires or foreign objects
• Keeps wiring and connectors routed and secured to reduce strain
• Restores proper fit and spacing over the control board for normal operation

• One PCB cover assembly

• Disconnect power to the appliance before servicing to avoid shock
• Handle the control board and connectors carefully; avoid touching components and use anti-static precautions if available
• Use basic hand tools to remove mounting screws/clips and secure the cover in the original position
• If you see damaged wiring or a compromised control board, replace components as needed before reassembly

A pair of white hinge endcap assemblies that restore door fit and finish on compatible refrigerators. These endcaps cover and protect the hinge area while improving door alignment and appearance. What it does:

• Caps the refrigerator hinge to protect hinge hardware from dust and damage
• Helps maintain proper door alignment for smooth opening and closing
• Restores finished look when cracked, chipped, or missing endcaps are visible
• Can reduce rubbing or catching caused by broken or worn endcap pieces

• Two (2) white hinge endcap assemblies

• Designed for replacement on the top/bottom hinge locations; verify correct side before installing
• Basic hand tools typically required; support the door when removing hinge fasteners to prevent injury or damage
• Disconnect power if work requires reaching electrical components near the hinge area

This hinge endcap assembly replaces worn or cracked door hinge end caps to restore a finished appearance and ensure the hinge pivots cleanly. Replaces damaged end caps on refrigerator/freezer doors and keeps the hinge area protected. What it does:

• Covers and protects the end of a door hinge to prevent binding and wear
• Helps maintain proper door alignment and smooth opening/closing
• Restores cosmetics where end caps are cracked, broken, or missing
• Fits the hinge pivot area and resists daily wear

• Disconnect power to the appliance and remove food/items from the door as needed before servicing.
• Remove the door per the manufacturer instructions to access hinge end caps if required.
• Use basic hand tools; keep screws and small parts organized during reassembly.
• If hinge or mounting hardware is damaged, inspect and replace as needed for safe operation.

A replacement damper gasket that seals the refrigerator air damper to help maintain proper air flow between compartments. Restores the damper seal so the cooling system can regulate temperatures more effectively. What it does:

• Seals the air damper opening to prevent unwanted air exchange between compartments
• Helps maintain proper airflow paths for consistent cooling and temperature balance
• Can reduce cold-air leakage and related temperature swings or excess frost near the damper
• Helps stop drafts or whistling noises caused by a worn or damaged damper seal

• One gasket damper

• Disconnect power to the appliance before beginning any repair
• Access may require removing interior panels or the damper housing—follow your model's service instructions
• Handle the gasket gently to avoid tearing; ensure it seats fully and evenly around the damper opening
• If the damper housing or mounting clips are damaged, replace them as needed for a proper seal

This left-side support secures and stabilizes the refrigerator door/side assembly for proper alignment and function. Replacing a worn or damaged support helps reduce door sag, improve sealing, and stop rubbing or unusual noises. What it does:

• Supports the left side of the door/side assembly to maintain proper alignment
• Prevents door sag that can cause poor sealing or uneven closing
• Reduces rattling or rubbing caused by a loose or broken support
• Restores proper fit to help the gasket seal and temperature control

• Disconnect power and empty the door area before starting any repair
• Follow OEM instructions for door removal/realignment; some screws/fasteners must be removed and re-torqued
• Handle adjacent trim or glass carefully to avoid damage

This silicon controlled rectifier (SCR) is a replacement power-switching semiconductor that helps control high-current flow to heating elements or motors, restoring proper power regulation and appliance function. What it does:

• Acts as a high-current electronic switch on appliance control circuits to regulate power to heating elements, motors, or similar loads
• Allows the control board to turn high-voltage circuits on and off with low-voltage signals
• Failure can cause no heat, intermittent heating, loss of power to a controlled component, or erratic operation
• Designed to handle repeated switching cycles under normal appliance operating conditions

• One silicon controlled rectifier module

• Disconnect all power before servicing to avoid shock or injury
• Handle as an electronic component; avoid static discharge and mechanical stress
• May require soldering or secure mounting to a heatsink or chassis—follow the appliance wiring diagram

This cover harness is the factory-style electrical connector assembly that links components behind the appliance cover, restoring secure, routed wiring and reliable connections for proper operation. What it does:

• Provides factory routing and secure electrical connections between controls and internal components
• Replaces damaged, frayed or corroded wiring that can cause intermittent operation
• Helps prevent loose terminals and arcing that may lead to component failures
• Used when cover-mounted connectors or wiring no longer seat or pass power reliably

• One cover harness

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle wiring and terminals carefully; do not force connectors—align and seat fully
• Route harness as original, using existing clips and fasteners to avoid pinching or chafing

This ground harness is a factory-style wire assembly that provides a safe electrical return path to reduce shock and interference risks. It restores proper grounding for affected appliance circuits and helps maintain safe operation. What it does:

• Connects appliance metal chassis/components to the ground system to prevent stray voltage and reduce shock risk
• Provides the ground path for control boards and other electrical components to function correctly
• Common symptom: appliance shows electrical faults, intermittent operation, or visible arcing at connection points
• Used when original ground wire is damaged, corroded, or has a failed connector

• One ground harness (wire assembly) as pictured

• Always unplug the appliance or disconnect power at the breaker before starting work
• Match connector types and routing to the original harness; secure all fasteners and strain reliefs
• Inspect mounting points and mating terminals for corrosion; replace fasteners if damaged

This LED jumper harness connects LED lights and lighting assemblies to the fridge's wiring, restoring reliable power and signal to LED circuits. It's a direct-replacement wiring jumper for lighting systems that need a damaged or worn harness replaced. What it does:

• Transfers power and signal between LED modules and the appliance wiring harness
• Replaces damaged, frayed, or corroded jumper wiring that can cause flickering or loss of light
• Helps restore consistent interior or dispenser lighting when the LED circuit is interrupted
• Maintains OEM routing for correct fit and connector alignment

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Handle connectors carefully; align and seat plugs fully but avoid excessive force.
• Route the harness away from sharp edges, hinges, and moving parts; secure with existing clips or ties.

This door harness with switch completes door-open/close circuits so door-activated functions work reliably and the interior light responds properly. It replaces a worn or damaged door switch harness to restore normal operation. What it does:

• Provides the wiring and switch that detects door open/closed position
• Restores proper operation of interior light and other door-activated functions
• Replaces frayed, broken, or intermittently working door harnesses
• Helps stop lights from staying on or failing to turn on when the door opens

• Disconnect power to the appliance before beginning work
• Handle connectors and wiring gently to avoid damage
• Access typically requires removing the door panel or liner; retain fasteners for reassembly

This housing wire is the replacement wiring housing used with the ice maker assembly in the freezer compartment. It protects and routes ice-maker wiring to help maintain reliable ice production and prevent wire chafing. What it does

• Protects and organizes ice maker wiring inside the freezer to prevent damage and shorts
• Helps maintain a secure connection between the ice maker and freezer harness
• Commonly replaced when wiring housing is cracked, torn, or allowing wire exposure
• Can resolve intermittent ice maker operation or electrical arcing caused by damaged wire insulation

• One housing wire assembly as shown

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Access may require removing the ice maker or freezer liner
• Handle wiring and connectors carefully to avoid damage; replace any worn connectors or clips

This stopper divider holds and positions a refrigerator drawer or shelf divider to keep contents separated and prevent sliding. Durable molded plastic replaces a worn or broken stop to restore proper drawer alignment and function. What it does:

• Stops and anchors the refrigerator drawer/divider to prevent shifting during normal use
• Restores correct drawer travel and alignment when the original stop is cracked or missing
• Helps maintain organized storage by keeping divider panels in place
• Works with compatible OEM drawer and divider assemblies to ensure proper fit

• One stopper divider part as shown

• Basic hand tools may be required; inspect mounting area for debris or damaged clips before installing
• Align and snap or slide the stopper into the factory location until it seats securely
• Do not force parts into place; replace damaged clips or supports if the stopper will not seat properly
• Unplug or power off the appliance before inspecting interior components for safety

Protective plastic cover that shields the appliance main control board from dust, moisture and accidental contact. Keeps the control electronics enclosed for safer operation and easier servicing without touching the board. What it does:

• Protects the main control board from spills, dust and physical contact that can cause shorts or damage
• Helps prevent accidental contact with live terminals during use or maintenance
• Keeps wiring and connectors secured and routed away from moving parts
• Restores the original enclosure for a proper OEM fit and finish
• Useful when the existing cover is cracked, warped or missing

• Always disconnect power to the appliance before servicing electrical components
• Remove interior panels or shelves as needed for access; retain mounting screws for reinstallation
• Align cover tabs and screw holes carefully to avoid stressing the board or connectors
• If the control board shows signs of damage, inspect or replace the board before reassembly

This deli pan top rear cover replaces the rear trim piece on the deli/warming top, restoring a finished appearance and protecting internal components from food, grease and spills. Keeps the deli area sealed and easier to clean. What it does

• Covers and protects the rear edge of the deli/warming pan top assembly.
• Shields wiring and internal components from food debris and grease buildup.
• Restores a proper fit and finish when the original rear trim is cracked, broken or missing.
• Helps maintain a clean, hygienic deli surface and simplifies wiping and maintenance.

• One deli pan top rear cover.

• Disconnect power to the appliance before beginning any service.
• Removal may require releasing clips or removing a few screws; keep hardware for reassembly.
• Handle the cover gently to avoid cracking; align tabs/clips before seating.

This replacement freezer drawer front restores the look and function of a damaged or worn lower freezer drawer on compatible GE refrigerators. It provides the exterior panel that secures and finishes the drawer assembly. What it does

• Replaces a cracked, dented, or discolored freezer drawer front to restore appearance
• Provides the structural front panel that attaches to the freezer drawer bin
• Helps the drawer close and align properly when mounted correctly
• Works with existing mounting hardware and handle

• One freezer drawer front (slate)

• Remove food and the freezer drawer bin before installation; handle and trim may need to be transferred from the old front
• Use proper tools and keep fasteners organized; follow manufacturer disassembly steps for your model
• Disconnect power if working near electrical components or lighting assemblies