Gne29gynbfs Parts

This right-hand freezer holder slide secures a freezer shelf or drawer in place so it operates smoothly and stays aligned. It replaces a worn or broken slide to restore proper shelf support and prevent slipping or binding. What it does

• Guides and supports the freezer shelf/drawer on the right side for smooth in-and-out movement
• Replaces cracked, broken, or worn plastic slide hardware
• Helps stop shelves or drawers from sagging, catching, or sliding out unexpectedly
• Works with the freezer compartment's shelving system to maintain proper alignment

• Disconnect power to the appliance before beginning any repair
• Typically replaces the existing right-side slide; remove the shelf/drawer to access mounting points
• Handle plastic parts gently to avoid cracking; inspect adjacent clips or supports for wear

Size: 8-32 t. Includes 12 screws.

This holder element assembly secures the appliance's heating element in the correct position so the element stays stable for consistent operation and safe performance. It's a direct-fit replacement for worn or damaged holders. What it does:

• Secures and supports the heating element inside the appliance to maintain proper alignment
• Prevents element sagging or contact with other components that can cause noise or arcing
• Helps reduce vibration and movement that can lead to intermittent heating
• Common symptom: visible holder damage, loose or shifted element, unusual noise during operation

• Disconnect power (unplug or switch off breaker) before starting any repair
• Allow appliance and element to fully cool before handling
• Handle the element and holder carefully to avoid bending or damaging the element

This tube clamp secures flexible water tubing to its fitting in refrigerators. It helps maintain a tight seal to prevent leaks and keeps lines from slipping off under normal operating pressure.

• Holds plastic or rubber tubing firmly on a barbed fitting or nipple
• Helps prevent drips and leaks at tube connection points
• Addresses loose or disconnected water lines
• Useful when tubing slips off or won't stay seated

• Disconnect power and shut off the water supply before servicing
• Position the clamp over the tube and fitting; compress with pliers and release to lock in place
• Ensure the clamp is centered and fully seated; tug-test the tube
• Restore water and power; check all connections for leaks

This hinge cap is the small trim piece that covers your refrigerator door hinge. Replacing a cracked or missing cap protects the hinge from dust and restores a clean, finished look to the door area.

• Covers and protects the door hinge hardware from dust and debris
• Restores a clean, factory-finished appearance
• Helps keep the hinge area clear for smooth door movement
• Replace when the original cap is cracked, loose, discolored, or missing

• Disconnect power before servicing the appliance
• Support the door to prevent movement while working near the hinge
• Remove the old cap; align and press the new cap onto the hinge until fully seated; reuse the original fastener if your model uses one
• Verify the cap is secure and does not rub as the door opens/closes

This right-hand hinge top pin assembly supports and lets a refrigerator or freezer door pivot smoothly, restoring proper alignment and door operation. Use it to correct sagging, misaligned doors, or noisy pivoting. What it does:

• Provides the pivot point for the door's top hinge to enable smooth opening and closing.
• Restores proper door alignment to fix uneven gaps or doors that rub or stick.
• Helps eliminate grinding or squeaking noises from a worn or damaged hinge area.
• Supports the door weight to prevent further sagging or seal damage.

• Unplug the appliance or switch off power before servicing to reduce shock risk.
• Support the door when removing hinge fasteners to prevent dropping or damage.
• Use basic hand tools; follow OEM procedure for loosening/tightening hinge hardware and torque if specified by manufacturer.

This door case wiring harness connects the refrigerator door components to the main cabinet harness, restoring reliable power and signal routing for lights, dispensers, and sensors. Replaces a damaged or frayed harness to help resolve intermittent or non-working door functions. What it does:

• Transfers power and control signals between the door and cabinet wiring
• Restores operation for door-mounted lights, dispensers, and sensors affected by broken wiring
• Prevents shorts or intermittent failures caused by frayed or pinched wires
• Matches OEM routing and connector locations for a direct-replacement fit

• One door case wiring harness

• Disconnect power to the appliance before starting work to avoid shock or injury
• Handle connectors gently and route wiring per cabinet clips to avoid pinching
• Verify connector orientation and seating; secure any retained clips or screws

This right-hand vegetable pan assembly replaces a cracked or damaged crisper pan so produce stays supported and drawers slide smoothly. It restores the refrigerator's storage area for fruits and vegetables. What it does:

• Supports and contains produce in the right-side crisper area to prevent items from falling into lower compartments.
• Provides a flat, stable surface so the associated drawer slides and seats correctly.
• Stops leaks or pooling caused by cracks or breaks in the original pan.
• Helps eliminate drawer binding or uneven alignment when the pan is damaged.

• Remove food and the crisper drawer before replacing the pan; reinstall drawer carefully to ensure proper seating.
• No special tools typically required; slide or snap the pan into the existing tracks per the fridge's hardware layout.
• Inspect surrounding rails and stops for damage; replace any broken hardware before installing the new pan.
• Handle edges carefully and recycle the old part according to local regulations.

The Pcb Asm Humidity Board is an OEM part for GE refrigerators. This humidity control board regulates the humidity levels within the refrigerator's crispers or drawers. It allows you to adjust and maintain the ideal humidity level for different types of produce, extending their shelf life and preserving their quality.

Symptoms of a bad humidity control board include:

• Inconsistent humidity levels
• Excessive moisture buildup
• Rapid spoilage of produce

A bad humidity control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as inconsistent humidity levels, excessive moisture buildup, or produce spoiling quickly, it may be time to replace the humidity control board.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This left-hand door side assembly is the cabinet-mounted control panel support that secures the refrigerator's control and user-interface components for reliable operation and a finished door appearance. What it does:

• Provides the left-side mounting and housing for the fridge control panel and associated switches
• Keeps control components aligned and secured to the door for consistent operation
• Restores proper fit and finish when the original door-side control housing is cracked, loose or damaged
• Can help resolve symptoms like a loose control panel, rattling at the door edge, or exposed electronics

• One left-hand door side control assembly

• Disconnect power to the appliance before starting work to avoid electrical shock
• Remove door panels or trim as needed to access mounting screws; keep hardware for reassembly
• Align assembly carefully and tighten fasteners snugly but do not overtighten plastic threads

This left-side condenser bin holds and protects the refrigerator condenser assembly, keeping airflow pathways clear for efficient cooling and helping prevent debris contact. It's a direct-fit replacement that restores proper condenser support and clearance. What it does

• Secures and positions the condenser coil/assembly to maintain correct airflow
• Shields the condenser from debris that can reduce cooling efficiency
• Prevents condenser contact with other components that can cause rubbing or noise
• Common symptoms: loud/rattling noises near the base, damaged or loose plastic housing, or reduced cooling performance linked to condenser obstruction

• Disconnect power before servicing to avoid electrical shock.
• Handle plastic parts carefully to avoid cracking; confirm clips and mounting tabs align before fastening.
• Use basic hand tools; keep small fasteners organized to prevent loss.

This left-side lower freezer slide restores smooth drawer movement and proper alignment in the freezer compartment. It replaces a worn or damaged slide to help the drawer open and close reliably. What it does:

• Replaces the left lower freezer drawer slide that guides the drawer on its track
• Restores smooth, even sliding and prevents the drawer from sticking or binding
• Helps keep the drawer properly aligned so it opens and closes without catching
• Useful when the existing slide is bent, cracked, or worn and affects drawer operation

• Disconnect power and remove food from the drawer area before starting
• Typically installs onto the freezer cabinet and drawer track; basic hand tools may be required
• Align slide with factory mounting points and secure hardware; test drawer movement after installation

Size: 8 - 18 ab.

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion

This 1/4-20 hex washer head screw secures panels and components in place, restoring proper fit and eliminating movement. It fits common appliance assemblies that use a 7/8" long, 1/4-20 threaded fastener. What it does:

• Fastens panels, brackets, and assemblies that use a 1/4-20 thread
• Restores secure fit when original screw is missing, stripped, or loose
• Helps stop rattling, vibration, and misalignment caused by loose hardware
• Matches common OEM head style for tool-ready installation with a socket or wrench

• Disconnect power to the appliance before servicing where applicable
• Use the correct 1/4-20 socket or wrench; install hand-tight then snug—do not overtighten
• Replace like-for-like: head style, thread size, and length before installing
• If fastener holes or threads are damaged, repair or retap before reuse