Grss2352af Parts

This housing assembly is the outer cabinet component that supports and protects internal appliance parts, restoring structural fit and appearance. Use it to replace cracked or damaged housings that expose internal components or cause misalignment. What it does:

• Replaces the appliance's outer housing to restore proper fit and protection
• Protects internal wiring, controls, and mechanical parts from damage and debris
• Helps correct alignment issues caused by a warped or broken cabinet
• Reduces rattles and vibration when the original housing is damaged

• 1 housing assembly

• Designed to mount to the appliance frame; some trim or panels may need temporary removal
• Inspect surrounding seals, fasteners, and clips; replace any damaged hardware
• Use appropriate hand tools and disconnect power before beginning work

This replacement screw fastens appliance components such as panels, brackets, and covers. Installing a new fastener restores a snug, rattle-free fit when the original screw is missing, stripped, or corroded.

• Secures covers, brackets, or trim to the cabinet or liner
• Replaces missing, stripped, or rusted hardware
• Helps reduce vibration and rattling from loose parts
• Supports proper alignment and stability of assemblies

• Disconnect power before servicing the appliance
• Use the correct driver/bit and start threads by hand to avoid cross-threading
• Do not overtighten, especially into plastic or thin sheet metal
• Retain and reinstall any original washers or spacers, if present

Specs: .875`` long

Replacement deli pan that fits into the refrigerator deli drawer to contain and organize meats, cheeses, and other small items. Restores storage function and makes access and cleanup easier. What it does:

• Provides a removable bin for storing deli meats, cheeses and other small food items
• Helps contain spills and crumbs to keep the drawer area cleaner
• Replaces pans that are cracked, warped, broken, missing, or that prevent the drawer from seating properly
• Intended for use as the deli drawer insert; check your owner's manual for fit

• Remove all contents and slide out the old pan; position the replacement and slide it into the drawer until it seats
• Typically no tools are required; follow your appliance's model-specific instructions if available
• Wash the pan before first use per your owner's manual or care instructions
• If the drawer does not seat or close properly after installation, check service documentation

This factory screw fastens refrigerator components and panels. It replaces missing or damaged hardware so parts stay aligned and secure, reducing looseness and rattles caused by vibration. What it does:

• Secures panels, brackets, and trim per your model's design
• Helps maintain alignment and reduce vibration-related loosening or noise
• Replaces missing, stripped, or corroded hardware
• Restores a snug fit when threads or heads are worn

• One screw

• Disconnect power; turn off the water supply if working near ice or dispenser systems
• Use the correct driver; start threading by hand to avoid cross-threading
• Tighten until snug—do not overtighten to prevent stripping or cracking adjacent plastic
• Refer to your model's diagram to confirm location and quantity used

Replacement solenoid that restores electromechanical action for the appliance component it controls, helping restore reliable operation when a worn or failed solenoid prevents movement or actuation. What it does:

• Converts electrical input into mechanical motion to move or hold a controlled mechanism.
• Energizes to engage the component and de-energizes to release it.
• Common symptoms of a failing solenoid: the controlled function doesn't respond, intermittent operation, or a humming/no-movement sound.
• Used as a direct replacement for a failed or sticking solenoid to return normal operation.

• Always disconnect power to the appliance before starting work.
• If the solenoid controls water, shut off the water supply before replacing.
• Match wiring connectors and mounting points; secure the part in the original orientation.
• After installation, restore power/water and test the controlled function for proper operation.

This refrigerator bracket is the OEM mounting piece that secures a specific internal assembly in place. Replacing a cracked or missing bracket restores a solid fit, proper alignment, and smooth, rattle-free operation of the attached component.

• Provides a rigid mounting point for the designated refrigerator component
• Maintains proper alignment to help the assembly operate correctly
• Helps reduce vibration and movement that can cause noise or wear
• Typical signs of failure: broken tabs, stripped holes, loose or misaligned parts

• Disconnect power; turn off water supply if working near ice/water components
• Access the area per your product's diagram; retain and reuse existing screws/fasteners
• Transfer any clips, spacers, or grommets from the old bracket to the new one
• The mounted component seats fully and operates before reassembling panels/shelves

The Dairy door Assembly is an OEM part for Frigidaire refrigerators. It is designed to securely hold and organize products on the door, keeping them easily accessible and fresh.

A bad bin assembly can be caused by wear and tear, damage, or improper handling. When the assembly becomes faulty, it can result in issues such as a loose or broken door bin, difficulty in opening or closing the bin, or inadequate temperature control for items.

Symptoms of a bad bin assembly include:

• Unstable or wobbly storage for dairy products
• Difficulty in accessing or retrieving items from the bin
• Spoiled items due to temperature fluctuations

This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This is the door handle for select microwave ovens. It gives you a solid grip to open and close the door and refreshes the unit's appearance when the original handle is broken, loose, or discolored.

• Provides a sturdy grasp for daily door operation
• Helps restore proper door opening/closing when the old handle is cracked or loose
• Cosmetic refresh for worn or yellowed handles
• Common symptoms: handle cracked, missing, or wobbly; difficulty opening the door

• Unplug the microwave before servicing for safety
• The handle mounts from the inside of the door; door panel disassembly is required
• Transfer and reuse existing screws; take care not to overtighten into plastic
• Support the door and note screw locations to ease reassembly

Removable silverware basket for the dishwasher lower rack that keeps forks, knives and spoons separated and upright during wash cycles, helping prevent items from shifting, nesting, or blocking spray for better cleaning results. What it does:

• Holds cutlery and small utensils securely to improve wash coverage and reduce nesting.
• Keeps sharp items contained to help protect dishes and reduce movement during cycles.
• Replaces cracked, broken, or missing baskets that allow silverware to fall through the rack.
• Easy to clean—simply rinse or place in the dishwasher top rack if needed.

• Typically installs without tools: slide out the lower rack and set the basket into the designated rack area.
• Ensure the basket is oriented correctly and does not obstruct rack travel or spray arms before running a cycle.
• Inspect surrounding rack tines and clips for damage while replacing the basket.
• Refer to the appliance owner's manual or service guide for model-specific instructions and safety information.

This water inlet tube routes potable water from the refrigerator's inlet/valve to the dispenser and ice-making components, helping restore normal water delivery and prevent leaks when damaged. What it does

• Channels water from the inlet valve to the dispenser/ice maker assembly.
• Replaces cracked, kinked, or clogged tubing that can cause leaks or reduced flow.
• Helps stop visible dripping, puddling, or intermittent water flow at the dispenser.
• Works as a direct-fit plumbing replacement when the original tube is damaged.

• One water inlet tube

• Turn off refrigerator power and shut off the water supply before starting.
• Inspect fittings and seals; replace any damaged ferrules or gaskets for a watertight connection.
• Use basic hand tools; avoid sharp bends or kinks when routing the tube.
• After installation, restore water and power, then check all connections for leaks.

This drawer roller allows your refrigerator's bin or crisper drawer to glide smoothly along its track. Replacing a worn or missing roller helps restore easy opening and closing and prevents drawers from sticking or binding.

• Supports the drawer as it slides on the rail/track
• Helps correct stiff, rough, or noisy drawer movement
• Can reduce uneven sliding or a drawer that pops off the track
• Common wear item when drawers are overloaded or used heavily

• Unplug the refrigerator before servicing
• Remove the affected drawer to access the roller
• Note roller orientation and reuse existing fasteners if applicable
• Test drawer travel after replacement to ensure smooth operation

A lower door hinge bracket that supports the bottom door hinge, restoring proper door alignment and smooth opening. Replace a bent or broken bracket to secure the hinge assembly and reduce door sag or binding. What it does:

• Provides structural support for the refrigerator/freezer bottom door hinge so the door opens and closes smoothly
• Helps prevent door sag, gaps, scraping, or uneven sealing caused by a damaged hinge bracket
• Replaces a bent, cracked, or corroded bracket that no longer holds the hinge pin securely
• Works as part of the hinge assembly; inspect hinge pin and mounting hardware when replacing

• Disconnect power to the appliance before servicing and remove food/items from the door area for safety
• Support the door securely while removing hinge fasteners to prevent it from falling or shifting
• Use correct hand tools; avoid overtightening fasteners which can strip threads or distort the bracket
• Check door alignment and seal after installation; replace any worn hinge pins or screws if needed

Replacement door stop that limits refrigerator door swing to prevent over-rotation and protect the hinge and cabinet. Restores controlled door travel so the appliance door opens and stops where it should. What it does:

• Limits how far the door can open to prevent damage to the hinge, door, or surrounding cabinetry
• Reduces stress on the hinge assembly and helps maintain proper door alignment
• Common symptom fix: door swings past normal stop, scrapes cabinet, or does not hold open properly
• Mounts at the hinge area to control travel and stop movement at the correct point

• Disconnect power to the appliance or follow the manufacturer's safety recommendations before starting
• Use basic hand tools; you may need to loosen or remove the hinge or door to access the stop
• Reuse existing screws/fasteners unless new hardware is supplied; tighten securely but avoid over-torquing plastic parts
• After installation, check door alignment and operation; make minor hinge adjustments if needed

This anti-twist pin secures mating parts to stop unwanted rotation and keeps linked components aligned for reliable operation. Replace a worn or broken pin to restore proper fit and reduce twisting, rubbing and noise. What it does:

• Keeps connected components from rotating or shifting, preserving alignment and part engagement.
• Helps prevent rubbing, scraping, or noisy operation caused by a loose or missing pin.
• Replaces a damaged or worn locating/retention pin that can allow assemblies to bind or move out of position.
• Simple mechanical replacement that restores intended part geometry and fit.

• Disconnect power to the appliance before servicing to avoid electrical or motion hazards.
• Remove any covers or panels as needed to access the pin; keep track of fasteners and orientation.
• Install the pin in the same orientation as the original; components move freely and are properly engaged before reassembly.

This rivet is a metal fastener used to permanently secure panels, brackets, or internal components in your appliance. Replacing a damaged or missing rivet restores a tight fit and helps prevent vibration, rattles, and looseness.

• Permanently joins thin metal parts where screws or nuts aren't used
• Maintains alignment and structural integrity of housings and frames
• Helpful when panels or components are loose, rattling, or won't stay secured
• Direct replacement for a worn, broken, corroded, or drilled-out factory rivet

• Disconnect power and shut off gas/water (as applicable) before servicing
• Support the part being fastened; drill out the old rivet head if needed
• A hand riveter/rivet tool may be required to set the new rivet
• Wear eye and hand protection during drilling/riveting