Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a burner that won't ignite or has a weak flame. This burner head replacement solves low flame and ignition issues on gas cooktops and ranges.
I decided to replace the whole orifice instead of just the 'spark plug'. In doing so it became apparent that the screws would not come off easily and so I purchased a couple of those to make sure I had enough just in case. Good thing, 2 were messed up taking them out. It was also pretty dirty after 13 years of cooking so I took the time to clean up most of the bits. It was a difficult thing to do and took me a while to get thru all the screws in correct order to remove the part and... Read more
Burner base for gas ranges that directs gas to the burner head and holds the orifice. Replace if cracked, rusted, or broken to restore proper fit.
I looked on line for a parts manual, then typed in a part, and this site came up. They had all the parts I needed. I never did a job like this, but the parts manual pictures made it simple, and then this site made it simple to order the parts. All together looking online, and tearing apart, ordering online, then putting it back together, about 3 hours. I do know how to use tools. Read more
Almond spray paint for appliance exteriors. Covers scratches, chips, and worn finishes on refrigerators, freezers, and other units. 13 oz can.
Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !! Read more
Replace your refrigerator's decorative handle trim panel when cracked, chipped, faded, or missing. Covers handle mounting area for a clean finish.
Just removed the broken items and replaced new ones all in under five minutes. Read more
Fix noisy operation or poor ice dispensing caused by a worn drive sleeve coupling. This connector transmits motor rotation in your refrigerator's drive assembly.
Spoke with a representive that diagnosed the problem as a bad control board. After receiving the new control board, I was able to easily perform the replacement by watching the step-by-step instructional video on the website. It is now functioning normally. Read more
Ice won't dispense when paddle is pressed? This dispenser motor assembly drives the auger mechanism. Most DIYers complete installation in 15 minutes.
When there was no ice in the bin, the auger turned, but with any ice, the auger simply stalled and could not push the ice around. Did not know where the problem was, but thought if I replaced the entire lower assembly (ordered a new motor, shaft, spring and coupler for the bottom part), that should do it. Took about 45 minutes from start to finish, but ice now dispenses fine as cubes or crushed. Read more
Fixes compressor that won't start or hums without running. This capacitor provides the electrical boost motors need for reliable startup and operation.
Secures range door panels and internal components to the cabinet frame. Replace if bracket is cracked, broken, or bent to restore proper door alignment.
Mounts in the dispenser to secure the ice housing assembly. Keeps the chute and door aligned for smooth dispensing. Replace if cracked, broken, or worn.
Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half. Read more
Black plastic button that covers the water filter release lever in the toe panel. Replace if cracked, broken, or missing from filter housing assembly.
Replaced water filter Read more
Connects water tubes of different sizes at the base of your refrigerator door. Replace if leaking, cracked, or calcified to restore a watertight seal.
Every once in a while we'd get a small leak just under the left side (freezer door). I moved the fridge out and saw the water stain towards the front of the unit. Carefully removing the grate (see the video on how to do this so you don't snap the plastic brackets. They are part of the grate and there is one on the left and one on the right, centered from top to bottom.) Anyway the problem was visible. There is a water tube that runs into the door and presumedly up to the water dispenser. ... Read more
Oven light not turning on when door opens? This door-activated switch detects door position and controls interior lighting. Easy push-in installation.
Metal frame that surrounds and secures the window glass in your range oven door. Replace if bent, corroded, or damaged to restore proper glass alignment.
Ice dispenser not crushing or auger dropped? This bearing nut secures the ice crusher auger to prevent wobble and jamming. Takes about 30 minutes to replace.
Replaced bearing nut with new one,took about 30 minutes. Read more
Crisper drawer won't adjust humidity or slide is broken? This humidity control slide mounts in the crisper cover to regulate airflow and moisture levels.
Fix weak water flow or dripping at your refrigerator dispenser with this spigot assembly. Routes water from supply line to dispenser outlet.
I was able to replace the ice and water dispenser pads as well as the water spigot, which has solved the problem. While a video wasn't available for my specific model of kitchenaid refrigerator, the resources on AppliancePartsPros.com made the repair easy. Read more