Gsc3500dbb Parts

This replacement chamber collection is the oven's inner cavity assembly that forms the cooking chamber and supports heating components. Replacing a damaged chamber restores the oven's proper enclosure for even cooking and safe operation. What it does

• Serves as the oven's inner liner and structural cavity that holds racks and heating elements
• Helps contain heat for consistent cooking temperatures
• Prevents heat and combustion byproducts from reaching external components
• Common symptom indicators: visible dents, cracks, rust or burn-through, smoke or unusual odors from the oven, or uneven cooking

• Disconnect power (and gas if applicable) before beginning work
• May require removal of the oven door, racks, and heating elements to access the cavity
• Handle carefully to avoid sharp edges; wear gloves and eye protection

This is a genuine replacement screw used to secure components and panels on compatible GE appliances. It restores proper fit and prevents rattling or loose parts for safe, reliable operation. What it does:

• Secures panels, brackets, or internal components to maintain proper alignment
• Stops rattling or vibration caused by loose fasteners
• Replaces missing, stripped, or damaged screws to restore safe operation
• Helps maintain seals and clearances by holding parts firmly in place

• Screw

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to components
• Keep removed fasteners organized to ensure correct reassembly

This wooden decorative trim panel restores the finished look of the appliance's front area and covers the control or fascia opening for a factory appearance. It replaces a damaged or worn wooden face to refresh the unit's exterior. What it does:

• Provides finished wood trim to cover and protect the control/console opening
• Restores the appliance's appearance after damage, wear, or panel replacement
• Hides mounting points and internal components for a clean look
• Works with existing fasteners and brackets to secure the fascia area

• Disconnect power to the appliance before starting any repair.
• Remove any screws or clips holding the old panel and retain hardware if reusing.
• Align the replacement panel with existing mounting points; do not force parts.

The Lower Dishrack is an OEM part for GE dishwashers. It provides a sturdy shelf for placing pots, pans, plates, and other dishware on the bottom level of the dishwasher interior. The lower dishrack supports dish loads, holding them securely in place during the wash cycles. 

Causes of a failing lower dishrack include long-term wear and tear, corrosion from exposure to water and detergents, damage from improper loading, and loose or broken components.

Symptoms of a bad lower dishrack:

• Difficulty sliding the rack in and out
• The rack getting stuck mid-cycle
• Broken or missing wheels/rollers
• Rust formation
• Bent or misshapen wires

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This fill funnel hose directs incoming water from the inlet to the washer tub, helping ensure proper fill and preventing water from spilling into surrounding components. It's a direct-replacement soft hose designed for OEM fit and routing. What it does

• Channels water from the inlet valve to the tub or dispenser so the washer fills correctly.
• Replaces cracked, kinked or deteriorated funnel hoses that can cause leaks or slow fills.
• Helps restore proper water flow and prevents water from contacting electrical components.
• Fits into the original routing to maintain factory water path and sealing.

• One fill funnel hose.

• Recommended for installers comfortable working with appliance water connections; disconnect power and shut off water before starting.
• Inspect inlet valve connection and clamps; replace clamps if corroded.
• Tighten clamps securely to prevent leaks, but avoid overtightening which can damage the hose.
• Run a short water-only cycle after installation to check for leaks before returning to normal use.

This cap tower upper is the replacement cover piece for the top of the dispenser/tower assembly. It restores the finished fit and alignment of the tower so the dispenser components sit correctly and look complete. What it does

• Covers and protects the top section of the tower/dispenser assembly to keep internal components shielded.
• Restores the correct appearance and alignment of the dispenser area after damage or wear.
• Helps prevent debris from entering the tower opening and interfering with nearby parts.
• Commonly replaced when cracked, broken, chipped, or missing, or when the tower no longer seats properly.

• One cap tower upper.

• Disconnect power to the appliance before beginning any repair.
• This part typically snaps or fits into the tower; inspect surrounding clips or tabs for damage before installing.
• Handle plastic tabs carefully to avoid further breakage; replace any damaged mounting clips.

This bearing hinge arm replaces a worn or damaged door hinge on compatible GE laundry appliances, restoring smooth opening and secure door alignment for safe, reliable use. It provides a stable pivot point and reduces binding and noise. What it does:

• Supports the appliance door and provides a smooth pivot with an integrated bearing
• Prevents door sag and helps maintain proper door seal and alignment
• Reduces squeaks, grinding, or sticking when opening and closing the door
• Restores secure door movement after hinge wear or damage

• One bearing hinge arm

• Disconnect power and water before starting any repair
• Remove the door or access panel to reach hinge mounting hardware
• Reuse existing fasteners only if undamaged; tighten hardware securely but avoid over-torquing
• Check door alignment and operation after installation; if binding persists, inspect other hinge or strike components

This CSM module assembly is the control sub-module that manages tub functions on compatible GE top-load washers, restoring normal cycle control and communication between the console and tub components. What it does:

• Controls and coordinates tub operations including agitation, spin, and cycle sequencing
• Helps the washer register and execute user-selected wash cycles
• Addresses symptoms such as washer not starting cycles, intermittent or no agitation/spin, or error codes related to tub control
• Works with the washer's main control and sensors to ensure proper cycle timing and transitions

• 1 CSM module assembly (C-Tub)

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Access typically requires removing the washer cabinet or console; handle the module and connectors gently
• Verify connector orientation and secure all wiring before restoring power

This SCR (silicon-controlled rectifier) is a control-circuit power-regulation component that helps manage electrical flow to appliance subsystems for reliable operation and stable control response. What it does:

• Regulates power flow in an appliance's electronic control circuit for proper component operation
• Helps enable consistent motor, heater, or timing control where used on the control board
• Faulty SCRs can cause intermittent operation, failure to start, or erratic control behavior
• Replacing a damaged SCR can restore steady, predictable appliance function

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle as an electronic/ESD-sensitive component; use proper grounding and avoid static discharge
• Some installations require soldering or board-level replacement—inspect mounting and connections carefully

This timer cover is the replacement trim that surrounds and protects the dryer or washer control timer on the control panel, restoring a finished look and shielding the timer mechanism from dust and debris. What it does:

• Replaces a cracked, faded, or damaged timer trim to improve appearance and protect the underlying timer assembly
• Helps keep lint, dust, and moisture away from the timer control area
• Restores correct alignment and mounting for the timer knob and control components
• Useful when the existing cover is loose, broken, or missing

• One timer cover

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove the control panel or access bezel per your model's service instructions to reach the timer cover
• Use appropriate hand tools (screwdriver) and avoid forcing plastic tabs to prevent breakage

This left-side door arm hinge secures and guides the appliance door, restoring proper alignment and smooth opening/closing. It replaces a bent or broken hinge to reduce sagging and uneven door movement. What it does:

• Supports the door on the left side and helps control its travel and position
• Restores proper door alignment when a hinge is bent, worn, or broken
• Helps eliminate door sagging, scraping, or uneven closing
• Works with existing hinge pins and mounting points to stabilize the door

• One left-side arm hinge

• Installation requires basic hand tools; refer to your model's service manual for step-by-step instructions
• Disconnect power (and water for washers) before starting any repair
• Inspect adjacent hinge hardware and fasteners; replace if worn to ensure proper fit and function

This right-hand arm hinge secures and guides the appliance door or access panel for proper alignment and smooth operation. It replaces a worn or broken hinge to restore correct door movement and positioning. What it does:

• Attaches the door to the cabinet and provides a pivot point for opening and closing
• Keeps the door aligned to prevent sagging, gaps, or rubbing
• Restores smooth, consistent door motion when the original hinge is bent, worn, or broken
• Helps reduce stress on the door and adjacent components caused by misalignment

• Install with power disconnected and appliance stable to avoid injury
• Tighten mounting fasteners securely but avoid over-torquing to prevent damage
• If replacing both sides or multiple components, inspect companion hinge and fasteners for wear

This fill funnel gasket seals the water-inlet funnel where water enters the dishwasher tub. Replacing a worn seal helps prevent drips at the inlet and keeps incoming water directed into the tub during the fill cycle.

• Provides a watertight seal between the fill funnel and tub wall
• Helps prevent leaks from the inlet area and under the toe-kick
• Directs incoming water properly into the tub during fill
• Replace if the gasket is cracked, deformed, or leaking

• Disconnect power and turn off the water supply before servicing
• Access the fill funnel area; remove the old gasket and clean the sealing surfaces
• Seat the new gasket evenly and ensure the funnel fully engages the opening
• Reassemble and run a short fill to check for leaks

This harness plug connects the dishwasher's wiring to the water inlet valve. Replacing a burnt, brittle, or loose connector restores a solid electrical connection so the valve energizes correctly and the tub fills when the cycle begins.

• Provides a secure, keyed connection between the harness and water inlet valve terminals
• Helps resolve no-fill or intermittent fill caused by heat damage, corrosion, or loose contacts at the connector
• Supports proper valve operation to reduce humming-without-fill complaints
• Useful when replacing a damaged plug during valve or harness service

• Disconnect power at the breaker and shut off water supply before servicing
• Note wire orientation; transfer or splice leads per appliance wiring and connector design
• Seat the plug fully on the valve and ensure tight, insulated connections
• Restore power and run a fill test; check for leaks at the valve and hose connections