Gsd406on10ss Parts

Replacement bracket that secures the flood/leak detection switch inside the appliance, keeping the switch positioned to sense unwanted water and help the leak-detection system work as intended. What it does:

• Holds the flood/leak switch in the correct position so it can detect water accumulation.
• Ensures consistent switch activation when water pools under the cabinet or base pan.
• Common repair when you find water under the appliance, persistent leaks, or when leak detection isn't responding.
• Simple, passive mounting part—no electrical function.

• Disconnect power and shut off the water supply before accessing the appliance.
• Remove the appropriate access panels to reach the bracket location; note orientation of the switch before removing.
• Reinstall bracket using the original fasteners or equivalent screws; keep parts organized during disassembly.
• Restore power/water and test the appliance for proper leak-detection operation after reassembly.

This is a replacement washer drive motor that powers the tub to spin and agitate, restoring normal wash and spin cycles. Fits specified GE top-load washers and matches OEM form and function. What it does

• Spins the wash tub to perform spin cycles and remove water
• Powers the agitation/oscillation action during wash cycles
• Commonly replaced when the washer won't spin, won't agitate, or hums without turning
• Helps eliminate intermittent power-to-motor issues when motor failure is the root cause

• One replacement drive motor

• Disconnect power before starting any repair to avoid electric shock
• May require removing the washer cabinet or access panels and detaching the old motor wiring and mounting screws
• Handle carefully — support the tub/drum as needed during motor removal and reinstallation

This hose clamp secures a washer or dryer hose connection to help prevent leaks and keep hoses firmly attached during operation. It's a simple replacement for worn or loose hose fasteners. What it does:

• Holds inlet or drain hose to the appliance fitting to reduce slipping and leaks
• Restores a tight seal at hose connection points that may be leaking or wobbling
• Keeps hoses positioned correctly during fill and drain cycles
• Useful when clamp is rusted, stretched, or no longer grips reliably

• One hose clamp

• Disconnect power and turn off the water supply before replacing the clamp
• Slide clamp onto hose, position over the fitting, then compress or tighten per clamp type (use pliers or screwdriver as required)
• Inspect the hose and fitting; replace the hose if cracked or damaged
• Test for leaks after restoring power and water

A stainless steel hex-washer-head screw used to secure panels and components on compatible appliances. Corrosion-resistant construction helps maintain a secure fit where short, strong fasteners are required. What it does

• Fastens appliance panels, trim, or brackets where an 8-18 thread and short 3/8" length are specified
• Hex washer head provides a larger bearing surface to reduce pull-through
• Stainless finish resists rust in humid appliance areas
• Common replacement when original mounting screw is stripped, missing, or corroded

• One stainless steel hex-washer-head screw

• Use the correct 8-18 thread fastener and do not force mismatched screws to avoid thread damage
• Tighten securely but avoid overtightening to prevent stripped threads or cracked panels
• Power tools may be used with appropriate bit, but start by hand to ensure proper alignment
• If installing near electrical components, disconnect power before servicing

A 10-24 x 1/2 thread-forming screw used to fasten panels and small components in appliances. Replaces missing or damaged fasteners to restore secure mounting and reduce rattling or misalignment. What it does:

• Secures panels, brackets, or trim to prevent movement and vibration
• Replaces missing, stripped, or damaged screws that allow parts to loosen
• Helps maintain proper alignment of doors and access panels
• Small, general-purpose fastener for a variety of appliance interior and exterior attachments

• Disconnect power to the appliance before beginning any repair
• Use the correct driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread damage
• Compare the old screw to length and thread before installing

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

The Control Kit is an OEM part for GE dishwashers. As a comprehensive kit, it includes all control-related components necessary for the smooth operation of the appliance. 

Symptoms of a bad control kit include:

• Issues with starting or running cycles 
• Faulty or unresponsive control buttons
• Error codes displayed frequently
• Inability to change dishwasher settings

Causes can be normal wear and tear of parts over time, exposure to moisture or chemicals damaging electronics, or faulty wiring connections.

The control kit is also compatible with Hotpoint, RCA, and some Kenmore models. 

This is the mechanism S/S assembly used to control the appliance's mechanical functions and restore proper operation. Replacing a worn or broken mechanism helps resolve intermittent or failed mechanical actions and audible clicking. What it does:

• Transfers user input into mechanical movement to operate the appliance's internal components
• Engages and releases internal linkages for door, latch, or control actions
• Restores consistent mechanical response when original mechanism is worn, stuck, or broken
• Can stop symptoms like inconsistent operation, failure to engage, or unusual noises during cycles

• One mechanism S/S assembly

• Replace only with the exact OEM part number
• Disconnect power (and water, if applicable) before attempting any repair
• Handle small components carefully; keep screws and clips organized for reassembly

Size: 8-32 x 5/8 inch.

This replacement chamber collection is the oven's inner cavity assembly that forms the cooking chamber and supports heating components. Replacing a damaged chamber restores the oven's proper enclosure for even cooking and safe operation. What it does

• Serves as the oven's inner liner and structural cavity that holds racks and heating elements
• Helps contain heat for consistent cooking temperatures
• Prevents heat and combustion byproducts from reaching external components
• Common symptom indicators: visible dents, cracks, rust or burn-through, smoke or unusual odors from the oven, or uneven cooking

• Disconnect power (and gas if applicable) before beginning work
• May require removal of the oven door, racks, and heating elements to access the cavity
• Handle carefully to avoid sharp edges; wear gloves and eye protection

This is a genuine replacement screw used to secure components and panels on compatible GE appliances. It restores proper fit and prevents rattling or loose parts for safe, reliable operation. What it does:

• Secures panels, brackets, or internal components to maintain proper alignment
• Stops rattling or vibration caused by loose fasteners
• Replaces missing, stripped, or damaged screws to restore safe operation
• Helps maintain seals and clearances by holding parts firmly in place

• Screw

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to components
• Keep removed fasteners organized to ensure correct reassembly

The Lower Dishrack is an OEM part for GE dishwashers. It provides a sturdy shelf for placing pots, pans, plates, and other dishware on the bottom level of the dishwasher interior. The lower dishrack supports dish loads, holding them securely in place during the wash cycles. 

Causes of a failing lower dishrack include long-term wear and tear, corrosion from exposure to water and detergents, damage from improper loading, and loose or broken components.

Symptoms of a bad lower dishrack:

• Difficulty sliding the rack in and out
• The rack getting stuck mid-cycle
• Broken or missing wheels/rollers
• Rust formation
• Bent or misshapen wires

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This E-Ring is a small retaining clip that snaps into a shaft groove to keep dishwasher components securely in place. Replacing a worn or missing ring restores proper fit and helps prevent parts from loosening during cycles.

• Locks a component onto a shaft/axle by engaging the groove
• Helps stop wobble, rattling, or components sliding off
• Common clue it's needed: clip is bent, broken, or missing
• Maintains alignment for smooth operation

• Disconnect power and shut off water before servicing
• Access the affected assembly and support the part being retained
• Use needle-nose pliers or a small flat-blade tool to remove/install; wear eye protection
• Ensure the ring is fully seated in the groove and the component cannot slide off