Gsd406on10ss Parts

This fill funnel hose directs incoming water from the inlet to the washer tub, helping ensure proper fill and preventing water from spilling into surrounding components. It's a direct-replacement soft hose designed for OEM fit and routing. What it does

• Channels water from the inlet valve to the tub or dispenser so the washer fills correctly.
• Replaces cracked, kinked or deteriorated funnel hoses that can cause leaks or slow fills.
• Helps restore proper water flow and prevents water from contacting electrical components.
• Fits into the original routing to maintain factory water path and sealing.

• One fill funnel hose.

• Recommended for installers comfortable working with appliance water connections; disconnect power and shut off water before starting.
• Inspect inlet valve connection and clamps; replace clamps if corroded.
• Tighten clamps securely to prevent leaks, but avoid overtightening which can damage the hose.
• Run a short water-only cycle after installation to check for leaks before returning to normal use.

This bearing hinge arm replaces a worn or damaged door hinge on compatible GE laundry appliances, restoring smooth opening and secure door alignment for safe, reliable use. It provides a stable pivot point and reduces binding and noise. What it does:

• Supports the appliance door and provides a smooth pivot with an integrated bearing
• Prevents door sag and helps maintain proper door seal and alignment
• Reduces squeaks, grinding, or sticking when opening and closing the door
• Restores secure door movement after hinge wear or damage

• One bearing hinge arm

• Disconnect power and water before starting any repair
• Remove the door or access panel to reach hinge mounting hardware
• Reuse existing fasteners only if undamaged; tighten hardware securely but avoid over-torquing
• Check door alignment and operation after installation; if binding persists, inspect other hinge or strike components

This CSM module assembly is the control sub-module that manages tub functions on compatible GE top-load washers, restoring normal cycle control and communication between the console and tub components. What it does:

• Controls and coordinates tub operations including agitation, spin, and cycle sequencing
• Helps the washer register and execute user-selected wash cycles
• Addresses symptoms such as washer not starting cycles, intermittent or no agitation/spin, or error codes related to tub control
• Works with the washer's main control and sensors to ensure proper cycle timing and transitions

• 1 CSM module assembly (C-Tub)

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Access typically requires removing the washer cabinet or console; handle the module and connectors gently
• Verify connector orientation and secure all wiring before restoring power

This outer door panel replaces a damaged or dented exterior door surface to restore appearance and protect inner door components. The stainless steel finish provides a clean look and resists everyday wear. What it does:

• Covers and protects the dishwasher/dryer/washer door assembly from impact and cosmetic damage
• Restores a uniform stainless finish to improve appliance appearance
• Helps keep internal door components free from moisture and debris
• Addresses symptoms such as dents, deep scratches, peeling finish, or visible corrosion on the outer door

• One outer door panel (stainless steel)

• Designed as a direct-fit replacement; follow your model's service manual for disassembly and reassembly steps
• Turn off power and water to the appliance before beginning service
• Use proper tools and support the door during removal to avoid dropping or bending the panel
• If clips or fasteners show damage, replace them; only install items explicitly shown as included

This SCR (silicon-controlled rectifier) is a control-circuit power-regulation component that helps manage electrical flow to appliance subsystems for reliable operation and stable control response. What it does:

• Regulates power flow in an appliance's electronic control circuit for proper component operation
• Helps enable consistent motor, heater, or timing control where used on the control board
• Faulty SCRs can cause intermittent operation, failure to start, or erratic control behavior
• Replacing a damaged SCR can restore steady, predictable appliance function

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle as an electronic/ESD-sensitive component; use proper grounding and avoid static discharge
• Some installations require soldering or board-level replacement—inspect mounting and connections carefully

This cap seals the washer sump area to help prevent leaks and keep water contained during cycles. It replaces a worn or damaged sump cap to restore a watertight seal and normal draining. What it does:

• Covers and seals the sump opening to prevent water from leaking out of the pump/sump area
• Helps maintain proper drainage by keeping contaminants out of the sump cavity
• Common part to replace when you see water pooling under the washer or around the base
• Fits the sump/pump assembly area and works with existing seals and hoses

• One cap sump

• Disconnect power and water before starting any repair
• Access usually requires removing the washer's lower access panel or front panel; follow your model's service manual
• Inspect nearby seals, hoses and the pump for wear; replace any damaged components to prevent repeat leaks

This timer cover is the replacement trim that surrounds and protects the dryer or washer control timer on the control panel, restoring a finished look and shielding the timer mechanism from dust and debris. What it does:

• Replaces a cracked, faded, or damaged timer trim to improve appearance and protect the underlying timer assembly
• Helps keep lint, dust, and moisture away from the timer control area
• Restores correct alignment and mounting for the timer knob and control components
• Useful when the existing cover is loose, broken, or missing

• One timer cover

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove the control panel or access bezel per your model's service instructions to reach the timer cover
• Use appropriate hand tools (screwdriver) and avoid forcing plastic tabs to prevent breakage

This left-side door arm hinge secures and guides the appliance door, restoring proper alignment and smooth opening/closing. It replaces a bent or broken hinge to reduce sagging and uneven door movement. What it does:

• Supports the door on the left side and helps control its travel and position
• Restores proper door alignment when a hinge is bent, worn, or broken
• Helps eliminate door sagging, scraping, or uneven closing
• Works with existing hinge pins and mounting points to stabilize the door

• One left-side arm hinge

• Installation requires basic hand tools; refer to your model's service manual for step-by-step instructions
• Disconnect power (and water for washers) before starting any repair
• Inspect adjacent hinge hardware and fasteners; replace if worn to ensure proper fit and function

This right-hand arm hinge secures and guides the appliance door or access panel for proper alignment and smooth operation. It replaces a worn or broken hinge to restore correct door movement and positioning. What it does:

• Attaches the door to the cabinet and provides a pivot point for opening and closing
• Keeps the door aligned to prevent sagging, gaps, or rubbing
• Restores smooth, consistent door motion when the original hinge is bent, worn, or broken
• Helps reduce stress on the door and adjacent components caused by misalignment

• Install with power disconnected and appliance stable to avoid injury
• Tighten mounting fasteners securely but avoid over-torquing to prevent damage
• If replacing both sides or multiple components, inspect companion hinge and fasteners for wear

A stainless-steel #6-20 screw (1/2" length) used to fasten appliance panels and components securely. Durable corrosion-resistant finish helps maintain a tight fit and long-lasting hold in wet or humid areas. What it does:

• Fastens trim, brackets, panels, and internal components where a #6-20 x 1/2" screw is specified
• Provides a corrosion-resistant connection for areas exposed to moisture
• Restores loose or missing fasteners that cause rattling or misalignment
• Matches OEM thread and length for proper fit and function

• One stainless steel #6-20 x 1/2" screw

• Turn power off and unplug appliance before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; stop when the component is snug and aligned
• Replace any additional damaged fasteners with matching OEM screws

This fill funnel gasket seals the water-inlet funnel where water enters the dishwasher tub. Replacing a worn seal helps prevent drips at the inlet and keeps incoming water directed into the tub during the fill cycle.

• Provides a watertight seal between the fill funnel and tub wall
• Helps prevent leaks from the inlet area and under the toe-kick
• Directs incoming water properly into the tub during fill
• Replace if the gasket is cracked, deformed, or leaking

• Disconnect power and turn off the water supply before servicing
• Access the fill funnel area; remove the old gasket and clean the sealing surfaces
• Seat the new gasket evenly and ensure the funnel fully engages the opening
• Reassemble and run a short fill to check for leaks