Gse25ghecss Parts

This spacer is a small mounting support used to maintain proper clearance and alignment between refrigerator panels, doors, or components. It helps reduce rubbing, vibration, and noise by restoring correct spacing and fit. What it does:

• Keeps panels, trim, or components spaced correctly to prevent metal-on-metal contact and wear
• Helps align doors and panels for a flush fit and smoother operation
• Reduces vibration and rattling caused by misaligned parts
• Used wherever a fixed clearance or gap is required during reassembly

• Disconnect power to the appliance before beginning any service that requires panel or component removal
• Inspect mating surfaces for damage or debris before installing the spacer; replace any damaged fasteners
• Install in the same orientation and location as the original spacer; do not overtighten mounting hardware

This fixed freezer module shelf supports and secures the freezer module assembly, restoring stable storage and preventing items from shifting or contacting the module. It's a direct replacement for a cracked, warped, or missing shelf. What it does:

• Holds and supports the freezer module assembly so it stays properly positioned.
• Keeps stored items from contacting or damaging the module.
• Replaces shelves that are cracked, broken, or bent and that allow items to slide or fall.
• Reduces rattling or movement caused by a loose or broken shelf.

• Disconnect power to the refrigerator before servicing to prevent electrical hazard.
• Empty the freezer area and remove loose shelves or bins that block access.
• Align the shelf with its mounting points and seat it gently; do not force or modify the part.
• If fasteners are present, reuse OEM fasteners or replace with manufacturer-specified hardware.

This 8-18 x 9/16 screw is a short sheet-metal fastener used to secure panels, trim and small components on appliances. It replaces missing or stripped screws to restore proper fit and reduce noise from loose parts. What it does

• Secures appliance panels, brackets and trim to prevent movement and rattling
• Holds small components in correct alignment for reliable operation
• Replaces lost, worn or stripped screws that cause gaps or loose fittings
• Common symptom link: fixes rattling panels, loose trim, or parts that shift during use

• One 8-18 x 9/16 screw

• Use the correct 8-18 driver bit and hand or low-torque power driver to avoid stripping
• Do not overtighten; snug until secure to prevent thread damage or panel deformation
• Turn power off/unplug appliance when installing near electrical components
• Keep extra screws on hand—hardware often comes in single quantities

This replacement screw fastens refrigerator components such as brackets, panels, and handles. Replacing a missing or stripped fastener with the correct size helps restore a secure fit, proper alignment, and quieter operation.

• Secures brackets, trim, or handle assemblies to the cabinet or liner
• Replaces stripped, corroded, or missing hardware
• Helps reduce rattles and looseness from vibration
• Maintains proper alignment of attached parts

• Unplug the refrigerator and shut off the water supply before service
• Match thread size and length to the original; start threads by hand to avoid cross-threading
• Use the correct driver bit for the head style; do not overtighten
• Reinstall any washers or spacers in the original order

A replacement cover hinge that protects and secures the door hinge assembly so the door opens and closes smoothly while keeping hinge hardware hidden. Fits select refrigerators and restores proper hinge alignment and appearance. What it does

• Covers and protects the door hinge area from dirt and damage.
• Helps maintain correct hinge alignment for consistent door movement.
• Prevents direct contact with hinge hardware for safer use.
• Commonly replaced when cracked, broken, or missing and causing loose or misaligned doors.

• Installation requires basic hand tools; remove power to the appliance for safety before starting.
• Support the door while removing or installing hinge components to avoid damage or injury.
• Inspect adjoining hinge hardware and mounting surfaces; replace any worn parts as needed.
• Follow the appliance manufacturer's instructions for proper torque and reassembly.

This arc handle assembly replaces a curved refrigerator door handle to restore a secure, finished grip and normal door operation. It matches OEM fit and the original door styling for a clean appearance. What it does:

• Replaces a damaged, cracked or loose curved refrigerator door handle
• Provides a secure grip for opening and closing the refrigerator door
• Restores proper handle alignment and appearance
• Helps prevent further damage from using a broken handle

• One arc handle assembly

• Disconnect power to the appliance before beginning any repair
• Remove door trim or screws as needed to access mounting points; keep fasteners for reassembly
• Use common hand tools (screwdriver/socket) and avoid overtightening to prevent damage

This plenum fan moves cold air from the evaporator into the refrigerator cabinet to help maintain even temperatures and proper cooling performance. It's a direct-replacement evaporator air-moving component. What it does:

• Circulates cold air from the evaporator coil through the refrigerator compartments
• Helps the appliance reach and hold set temperatures for food safety
• Commonly associated with weak cooling, uneven temperatures, or excessive frost buildup when failing
• Works with the evaporator motor system to maintain proper airflow

• One plenum fan (evaporator) assembly

• Disconnect power to the appliance before beginning any repair
• Handle evaporator fins and fan blades carefully to avoid damage
• May require removing interior panels or the evaporator cover; use basic hand tools

This auger motor service kit replaces the drive components that move ice from the bin through the refrigerator door dispenser, helping restore reliable ice delivery. Use it when the dispenser won't turn or only hums. What it does:

• Powers and turns the auger to push ice through the dispenser — for symptoms like no ice dispensed or auger not turning.
• Replaces worn or failed motor/drive components that can cause the motor to hum without rotating.
• Helps eliminate intermittent dispensing, slow or weak auger movement, and auger-related jams.
• Restores engagement between the motor and auger so ice feeds consistently from the bin to the door.

• Disconnect power to the refrigerator before starting any repair.
• Remove ice bin/door panels per manufacturer instructions and keep fasteners organized.
• Follow OEM service instructions for correct motor alignment and secure mounting; test the dispenser after reassembly.

A direct-replacement evaporator defrost heater that melts frost and ice buildup on the freezer evaporator so the cooling system runs efficiently. Replaces a failed heater to restore normal automatic defrost operation. What it does:

• Heats the evaporator coil during the defrost cycle to remove frost and ice buildup.
• Helps prevent thick ice accumulation that can reduce airflow and cooling performance.
• Frequently replaced when frost repeatedly builds on the evaporator or the freezer runs colder than normal.
• Works with the refrigerator's existing defrost control and thermostat to restore automatic defrosting.

• One defrost heater (single assembly only)

• Disconnect power to the appliance before servicing to avoid shock.
• Remove freezer panels and handle the evaporator coil carefully to avoid damage.
• Verify defrost thermostat, control, and wiring are functioning before installing a new heater.

A direct-replacement crusher solenoid that actuates the ice-crushing mechanism in the dispenser/ice bucket, restoring normal crusher movement so the dispenser can break and deliver crushed ice without jams. What it does:

• Actuates the crusher assembly to move the crusher blades or gate during ice dispensing.
• Restores crushing action when the ice dispenser fails to produce crushed ice.
• Can help stop symptoms such as ice not crushing, dispenser jams, or a crusher mechanism that won't move.
• Engages electrically with the dispenser control when crush mode is selected.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access may require removing the dispenser inner door, ice bucket, or panel.
• Handle plastic components and electrical connectors carefully; do not force connectors or wiring.
• After installation, restore power and test the dispenser through multiple cycles to ensure proper crusher operation.

Size: 8-32 t. Includes 12 screws.

This black cover hinge replaces a damaged or worn hinge cover to restore proper fit and appearance where the hinge mounts. It helps protect the hinge area and keeps the lid or top closing and opening smoothly. What it does:

• Covers and secures the hinge area to prevent wear and reduce rubbing or noise
• Helps keep the lid/top aligned for smooth opening and closing
• Restores finished appearance where the original hinge cover is cracked or missing
• Commonly used when the hinge cover is broken, loose, or causes wobble or misalignment

• Disconnect power to the appliance before servicing to avoid shock or injury
• Basic hand tools (screwdriver, socket) are typically required; keep removed fasteners for reinstallation
• Handle sharp edges carefully and support the lid/top during removal and installation

This stop door is the dispenser closure that helps control and seal the ice/water opening so the dispenser stays closed when not in use. It restores proper sealing and prevents drafts or drips from the dispenser area. What it does:

• Closes and seals the dispenser opening to help stop air exchange and reduce moisture entry
• Moves with the dispenser actuator to expose the chute only during dispensing
• Helps prevent water or ice from dripping when the dispenser is idle
• Reduces airflow that can cause frost or temperature issues in the dispensing area

• One stop door

• Disconnect power to the appliance before starting any repair
• Remove dispenser cover/panel per your model's service instructions to access the stop door assembly
• Inspect mounting pins and the actuator linkage; replace any broken fasteners for proper operation
• Handle plastic components carefully to avoid cracking; re-test dispenser operation after reassembly

The Mobility Wheel S Kit is an OEM part for GE refrigerators. This kit includes the necessary components to replace or install the wheels on the bottom of your refrigerator cabinet, allowing for easy movement and repositioning of the appliance.

A bad mobility wheel assembly can be caused by normal wear and tear over time, damage due to heavy loads or rough handling, or malfunctioning wheel mechanisms. If you find it difficult to move or reposition your refrigerator, or if the existing wheels are damaged, it may be time to replace the mobility wheel assembly.

Symptoms of a bad wheel assembly include:

• Difficulty in moving or sliding the refrigerator
• Uneven or unstable positioning of the appliance
• Excessive noise or scraping sounds when moving the refrigerator
• Damaged or worn-out wheels

Replace your faulty mobility wheel assembly with this genuine OEM part to restore your refrigerator. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This molded duct assembly directs cold air from the freezer compartment into the fresh-food section to help maintain proper airflow and temperature balance. It replaces a damaged or cracked transition duct to restore directed air circulation. What it does:

• Channels freezer-cooled air into the refrigerator compartment for even cooling distribution
• Helps reduce warm spots in the fresh-food area when functioning correctly
• Can prevent excessive frost or ice buildup caused by misdirected airflow
• Supports proper operation of the freezer-to-fridge venting system

• Disconnect power to the appliance before service to avoid electrical shock
• Remove shelves, drawers, and access panels as needed to reach the duct
• Handle the duct carefully to avoid cracking plastic tabs; use appropriate fasteners when reinstalling