Gslj25fxb Parts

This light socket connects the interior lamp to the refrigerator wiring so the interior light turns on when the door opens. It replaces a damaged or burned socket to restore reliable lighting. What it does:

• Holds the interior lamp securely and provides the electrical contact for operation
• Restores lighting when a damaged socket causes the light to fail or flicker
• Prevents intermittent connections from poor contacts or heat damage
• Works with the appliance's existing wiring and bulb style

• Disconnect power to the appliance before inspecting or replacing the socket.
• Handle bulbs and sockets carefully; use gloves to avoid cuts and for hygiene.
• Test operation after installation; replace the bulb if necessary.

Fresh food

A stationary blades assembly that secures the stationary blade in place so the cutting or dispensing mechanism operates smoothly. Replacing a worn or broken assembly restores proper blade alignment and reduces noise or poor cutting performance. What it does:

• Holds the stationary blade securely to stabilize rotation and cutting action
• Maintains correct blade alignment to prevent wobble, jamming, or uneven cutting
• Helps reduce abnormal noise and vibration caused by a loose or damaged blade mount
• Restores reliable operation of the appliance's blade/dispensing mechanism when original part is worn or cracked

• One stationary blades assembly

• Disconnect power (or unplug) and turn off water supply if applicable before beginning repair
• Remove access panels or covers to reach the blade area; keep track of fasteners and trim
• Inspect mating parts (rotor, fasteners, seals) for wear and replace if damaged

Lower gasket shield protects and supports the bottom edge of the refrigerator/freezer door gasket for a tighter seal, reducing air leaks and moisture build-up while keeping the gasket aligned for reliable sealing. What it does:

• Protects and secures the lower edge of the door gasket to maintain proper gasket positioning and contact.
• Helps prevent cold air loss, frost buildup, and condensation caused by a misaligned or damaged lower gasket area.
• Provides a mounting surface that keeps the gasket from folding or pulling away at the bottom of the door.
• Replaces worn, cracked, or broken lower shield pieces that can cause visible gaps or sealing issues.

• Disconnect power to the appliance before beginning any repairs and follow manufacturer service instructions.
• Remove the door gasket or lower trim per OEM steps to access the shield; keep fasteners and note orientation for reassembly.
• Do not force plastic parts; if removal is tight, work slowly to avoid cracking the cabinet or new shield.

This rear gasket cover secures the refrigerator door gasket and helps maintain a clean seal at the back edge of the door. It restores proper gasket alignment and helps reduce air leaks and moisture buildup. What it does:

• Holds the rear edge of the door gasket in place for a consistent seal.
• Helps prevent cold air loss and condensation by keeping the gasket aligned.
• Reduces rubbing and wear on the gasket edge caused by movement.
• Commonly replaced when the cover is cracked, missing, or allows the gasket to pull loose.

• One rear gasket cover.

• Remove power to the appliance before beginning any work.
• Typically installs by snapping or sliding into the door gasket channel; inspect surrounding trim for damage.
• Use basic hand tools; avoid forcing the cover to prevent breaking the part or the door.
• If gasket damage is present, replace the gasket as needed to ensure a proper seal.

This support slide holds and guides a refrigerator or freezer basket so it opens and closes smoothly, preventing sagging and keeping stored items accessible. It restores proper basket movement and alignment for safer, more reliable use. What it does

• Replaces a worn or broken slide that supports the basket and allows it to glide.
• Restores smooth in-and-out motion so the basket doesn't stick or bind.
• Prevents the basket from tipping or sagging when loaded.
• Helps reduce noise and uneven movement caused by damaged slides.

• Disconnect power to the appliance before starting any repair.
• Remove the basket or drawer to access the slide assembly; reinstall the slide in the same orientation.
• Align the slide with the mounting points and secure until it snaps/locks into place; verify smooth operation before returning items to the basket.
• Replace it with the correct OEM fasteners only.

This support slide secures and guides a refrigerator freezer basket so it opens and closes smoothly and stays aligned. It replaces worn or broken slides to restore proper basket support and movement. What it does:

• Guides the basket along its track for smooth in-and-out motion
• Helps keep the basket level and prevents it from sagging or tilting
• Replaces damaged or worn slide hardware that can cause sticking or uneven travel
• Addresses symptoms like a basket that won't slide smoothly, drops, or misaligns

• One support slide

• Turn off power to the appliance and remove stored items from the basket before starting
• Compare the old slide to the new one to confirm orientation and mounting points
• Install by aligning the slide with the mounting points and securing per OEM fastener locations

This silicon controlled rectifier (SCR) is an electronic switching device used to control power to oven/stove heating circuits, helping the appliance regulate temperature and heat output for cooking performance. What it does:

• Switches and regulates AC power to heating elements for controlled heat
• Enables cycle-based or phase-controlled heating used by oven/range controls
• Common replacement when an element won't heat consistently or unit won't maintain temperature
• Helps stop erratic heating caused by a failed power control component

• Disconnect power to the appliance before inspecting or replacing the SCR
• Observe ESD precautions and handle the component by insulated edges

This is a 6-10 x 1/2 inch Phillips pan-head screw used to fasten appliance panels and components. It replaces stripped or missing fasteners so panels and brackets stay securely attached and aligned. What it does

• Secures trim, panels, brackets, and internal components to prevent loosening or rattling
• Restores proper fit and alignment after repair or disassembly
• Helps maintain grounding/connection where screw retention is required
• Common symptom: loose or missing screws causing vibration, rattles, or gaps in panels

• One Phillips pan-head screw (6-10 x 1/2 in)

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct #2 Phillips driver and seat the bit fully to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or damage plastic parts
• Replace with the exact OEM screw for best fit and finish

This light reflector directs and protects the appliance lamp, improving illumination and preventing direct bulb contact. It restores proper light focus so interior areas are evenly lit and bulbs remain securely positioned. What it does:

• Reflects and directs light from the lamp for better interior visibility
• Shields the bulb from contact with food or components
• Helps maintain consistent light output and coverage
• Commonly replaced when light appears dim, uneven, or the reflector is cracked or missing

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove the bulb before installing the reflector; handle bulbs and reflector with care to avoid damage
• Use only compatible replacement parts and follow the appliance manufacturer's instructions

This tail handle is the replacement end piece for a refrigerator door handle assembly, restoring a finished grip and proper handle fit. It helps maintain a secure, comfortable hold and keeps the door handle aligned. What it does:

• Replaces a cracked, broken or missing tail/end piece on a refrigerator door handle
• Restores proper fit and finish so the handle sits securely and functions normally
• Helps eliminate looseness, wobble or sharp edges caused by a damaged tail piece
• Matches OEM shape to maintain original handle appearance

• One tail handle piece as shown

• High-level installation: access the door handle ends, remove any retaining screws or clips, swap the damaged tail piece for the replacement, and reassemble
• Use basic hand tools; avoid over-tightening fasteners to prevent cracking
• If the handle is painted or scratched, handle replacement part carefully to avoid surface damage
• Disconnect power only if working near electrical components or lights; otherwise no electrical disconnection is typically required

This front door shelf is a replacement freezer door bin that restores lost door storage and helps keep frozen items organized and accessible. Built to match the original fit and function for a secure door storage solution. What it does:

• Replaces a cracked, broken or missing freezer door shelf to restore door storage
• Holds frozen foods and small items that sit on the freezer door
• Keeps items organized and prevents them from falling out when the door opens
• Matches original mounting points to maintain proper fit and alignment

• Unplug or disconnect power to the appliance before servicing
• Remove food and empty the door before replacing the shelf
• Align the shelf with the door mounting points and press into place until it snaps or seats securely
• If original mounting clips or supports are damaged, replace them to ensure a proper fit

This replacement rack can restores a damaged or missing support cup that helps hold and stabilize a refrigerator rack. It lets shelves sit level so stored items stay secure and the rack moves smoothly. What it does

• Supports a refrigerator shelf or rack pivot so the rack stays level and aligned.
• Replaces cracked, split, or missing support cups that allow racks to tilt or drop.
• Reduces rattling, binding, or uneven sliding caused by a failed rack support.
• Restores proper engagement with rack tracks or pivots for safe storage.

• One rack can (support cup) as pictured.

• Disconnect power (unplug or shut off breaker) before working inside the appliance.
• Remove the affected rack or shelf to access the support cup; installation typically snaps or presses into the rack/frame.
• Inspect mating surfaces for debris or damage; clean before installing the new cup for a secure fit.

This replacement front evaporator fan motor bracket secures the evaporator fan motor and axial fan blade to the freezer evaporator assembly, helping restore proper airflow and reduce vibration. It's a direct-fit mounting support designed for like-for-like replacement. What it does

• Holds the evaporator fan motor and blade in the correct position for consistent airflow across the evaporator coil
• Keeps the motor stable to prevent excessive vibration or rubbing noises
• Helps maintain proper clearance between the fan blade and surrounding shrouds
• Supports reliable fan operation that assists with proper cooling and frost control

• One front evaporator fan motor bracket

• Disconnect power to the appliance before starting any repair
• Remove interior panels and the evaporator cover to access the bracket
• Inspect and replace any damaged fasteners; tighten mounting screws securely but avoid overtightening plastic tabs
• Handle evaporator fins and the fan blade carefully to avoid damage; test fan operation before reassembling all panels