Gss25iynbhfs Parts

This factory screw secures panels, brackets, and other components inside your refrigerator. Replacing a missing or stripped fastener restores a tight fit, reduces vibration, and helps keep parts aligned so covers and assemblies stay in place.

• Fastens sheet-metal, plastic, and bracket assemblies to the cabinet or liner
• Replaces lost, corroded, or stripped hardware
• Can help address loose or rattling parts and minor misalignment
• Fits original threaded mounting points for a proper, secure hold

• Disconnect power; shut off water supply if working near water lines
• Match to the original location; start threads by hand to avoid cross-threading
• Tighten snugly only—overtightening can strip threads or crack plastic

The Top Hinge & Pin Assembly is an OEM part for GE refrigerators. It helps maintain the alignment of the door and ensures a tight seal, keeping the cold air inside and the warm air out.

A bad top hinge and pin assembly can be caused by wear and tear over time, excessive weight or force applied to the door, or damage due to accidental impact or mishandling.

Symptoms of a bad top hinge and pin assembly include:

• Difficulty in opening or closing the refrigerator door.
• Uneven alignment or gaps between the door and the refrigerator body.
• Squeaking or creaking sounds when opening or closing the door.
• The door not staying closed.

Replace your worn-out or damaged top hinge and pin assembly with this OEM part and restore the smooth operation of your refrigerator door.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Top pan cover assembly protects the appliance's upper cavity components and restores a finished appearance. Replacing a damaged cover helps keep debris and moisture out of internal areas and restores proper mounting for related parts. What it does:

• Shields the top pan area to protect wiring, insulation and nearby components from debris and spills.
• Provides the mounting/trim surface for associated parts and helps maintain cabinet alignment.
• Replace if the cover is cracked, bent, missing or causing rattles, vibration or exposed internal parts.
• Helps reduce the chance of foreign material entering the cabinet through the top opening.

• Disconnect power (and water supply if applicable) before beginning any repair.
• Remove access panels and fasteners to reach the top pan; keep hardware for reassembly.
• Handle carefully to avoid damaging surrounding insulation or wiring; verify proper alignment and secure all fasteners.

This 8-18 x 9/16 screw is a short sheet-metal fastener used to secure panels, trim and small components on appliances. It replaces missing or stripped screws to restore proper fit and reduce noise from loose parts. What it does

• Secures appliance panels, brackets and trim to prevent movement and rattling
• Holds small components in correct alignment for reliable operation
• Replaces lost, worn or stripped screws that cause gaps or loose fittings
• Common symptom link: fixes rattling panels, loose trim, or parts that shift during use

• One 8-18 x 9/16 screw

• Use the correct 8-18 driver bit and hand or low-torque power driver to avoid stripping
• Do not overtighten; snug until secure to prevent thread damage or panel deformation
• Turn power off/unplug appliance when installing near electrical components
• Keep extra screws on hand—hardware often comes in single quantities

This replacement screw fastens refrigerator components such as brackets, panels, and handles. Replacing a missing or stripped fastener with the correct size helps restore a secure fit, proper alignment, and quieter operation.

• Secures brackets, trim, or handle assemblies to the cabinet or liner
• Replaces stripped, corroded, or missing hardware
• Helps reduce rattles and looseness from vibration
• Maintains proper alignment of attached parts

• Unplug the refrigerator and shut off the water supply before service
• Match thread size and length to the original; start threads by hand to avoid cross-threading
• Use the correct driver bit for the head style; do not overtighten
• Reinstall any washers or spacers in the original order

This dispenser housing shield is the outer stainless trim piece that fits around the refrigerator dispenser to restore appearance and protect internal dispenser components. It gives the dispenser a finished look and helps channel dispensed water and ice. What it does:

• Covers and protects dispenser controls and internal dispenser components from spills and debris
• Provides a finished stainless trim around the dispenser area for improved appearance
• Helps direct water and ice from the dispenser to the user, reducing splash
• Replaces a dented, scratched, or corroded dispenser face for a like-new look

• One dispenser housing shield (stainless)

• Disconnect power to the appliance before starting any repair
• May require removal of the dispenser bezel or door panel—keep fasteners and trim organized
• Handle gently to avoid scratching the stainless finish during installation

This auger motor service kit replaces the drive components that move ice from the bin through the refrigerator door dispenser, helping restore reliable ice delivery. Use it when the dispenser won't turn or only hums. What it does:

• Powers and turns the auger to push ice through the dispenser — for symptoms like no ice dispensed or auger not turning.
• Replaces worn or failed motor/drive components that can cause the motor to hum without rotating.
• Helps eliminate intermittent dispensing, slow or weak auger movement, and auger-related jams.
• Restores engagement between the motor and auger so ice feeds consistently from the bin to the door.

• Disconnect power to the refrigerator before starting any repair.
• Remove ice bin/door panels per manufacturer instructions and keep fasteners organized.
• Follow OEM service instructions for correct motor alignment and secure mounting; test the dispenser after reassembly.

A direct-replacement evaporator defrost heater that melts frost and ice buildup on the freezer evaporator so the cooling system runs efficiently. Replaces a failed heater to restore normal automatic defrost operation. What it does:

• Heats the evaporator coil during the defrost cycle to remove frost and ice buildup.
• Helps prevent thick ice accumulation that can reduce airflow and cooling performance.
• Frequently replaced when frost repeatedly builds on the evaporator or the freezer runs colder than normal.
• Works with the refrigerator's existing defrost control and thermostat to restore automatic defrosting.

• One defrost heater (single assembly only)

• Disconnect power to the appliance before servicing to avoid shock.
• Remove freezer panels and handle the evaporator coil carefully to avoid damage.
• Verify defrost thermostat, control, and wiring are functioning before installing a new heater.

A direct-replacement crusher solenoid that actuates the ice-crushing mechanism in the dispenser/ice bucket, restoring normal crusher movement so the dispenser can break and deliver crushed ice without jams. What it does:

• Actuates the crusher assembly to move the crusher blades or gate during ice dispensing.
• Restores crushing action when the ice dispenser fails to produce crushed ice.
• Can help stop symptoms such as ice not crushing, dispenser jams, or a crusher mechanism that won't move.
• Engages electrically with the dispenser control when crush mode is selected.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access may require removing the dispenser inner door, ice bucket, or panel.
• Handle plastic components and electrical connectors carefully; do not force connectors or wiring.
• After installation, restore power and test the dispenser through multiple cycles to ensure proper crusher operation.

Size: 8-32 t. Includes 12 screws.

The Mobility Wheel S Kit is an OEM part for GE refrigerators. This kit includes the necessary components to replace or install the wheels on the bottom of your refrigerator cabinet, allowing for easy movement and repositioning of the appliance.

A bad mobility wheel assembly can be caused by normal wear and tear over time, damage due to heavy loads or rough handling, or malfunctioning wheel mechanisms. If you find it difficult to move or reposition your refrigerator, or if the existing wheels are damaged, it may be time to replace the mobility wheel assembly.

Symptoms of a bad wheel assembly include:

• Difficulty in moving or sliding the refrigerator
• Uneven or unstable positioning of the appliance
• Excessive noise or scraping sounds when moving the refrigerator
• Damaged or worn-out wheels

Replace your faulty mobility wheel assembly with this genuine OEM part to restore your refrigerator. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This molded duct assembly directs cold air from the freezer compartment into the fresh-food section to help maintain proper airflow and temperature balance. It replaces a damaged or cracked transition duct to restore directed air circulation. What it does:

• Channels freezer-cooled air into the refrigerator compartment for even cooling distribution
• Helps reduce warm spots in the fresh-food area when functioning correctly
• Can prevent excessive frost or ice buildup caused by misdirected airflow
• Supports proper operation of the freezer-to-fridge venting system

• Disconnect power to the appliance before service to avoid electrical shock
• Remove shelves, drawers, and access panels as needed to reach the duct
• Handle the duct carefully to avoid cracking plastic tabs; use appropriate fasteners when reinstalling

This hinge top & pin assembly secures the refrigerator/freezer door to the cabinet and helps the door pivot smoothly and stay aligned. Replacing a worn hinge restores proper door alignment and closing. What it does

• Provides the pivot point for the door at the cabinet top
• Keeps the door aligned to prevent rubbing, sagging, or uneven gaps
• Helps the door close securely to maintain proper seal
• Replaces damaged, bent, or worn hinge hardware that can cause noise or misalignment

• One hinge top with pin assembly

• Unplug the appliance or disconnect power before beginning work
• Support the door while removing the old hinge to prevent it from dropping
• Keep original screws and mounting hardware unless replacement hardware is supplied

This shield trough assembly catches and channels defrost and condensation water away from the refrigerator cabinet to help prevent leaks and ice buildup. It's a direct-fit replacement that restores proper water drainage and containment. What it does

• Collects defrost and condensation runoff and directs it to the drain pan
• Helps prevent water pooling inside the cabinet and under the appliance
• Reduces ice or frost accumulation caused by redirected water
• Provides structural support for adjacent trim and evaporator covers where applicable

• Disconnect power to the appliance before beginning any repair.
• Remove relevant shelves, drawers, and trim panels to access the trough; keep fasteners organized.
• Handle gently to avoid bending or damaging mounting tabs and seal surfaces.

This badge is the small decorative nameplate used on the appliance exterior to display the manufacturer's emblem. It restores factory appearance and covers the original mounting location for a clean, finished look. What it does

• Replaces a damaged, faded, or missing exterior emblem to restore the appliance's original look
• Snaps or adheres into the existing badge location for a factory-correct appearance
• Helps identify the appliance visually without affecting function
• Common symptom: missing, scratched, or peeled badge on the appliance front

• One replacement badge/nameplate (exact fit for the listed part number)

• Installation is typically simple: align badge with mounting location and press into place; adhesive backing or snap clips may be used depending on model
• Clean mounting surface before installing to ensure good adhesion
• Use gentle pressure; avoid sharp tools that could scratch the finish
• If clips break during removal, replace clips only if explicitly listed as included