Gss26c5xxyop Parts

This cover-wire protects and organizes a machine's wire harness to help prevent chafing and accidental contact with hot or moving parts. It keeps wiring routed and out of the way for safer, more reliable appliance operation. What it does:

• Shields wiring from abrasion and contact with sharp edges or moving components
• Helps prevent intermittent electrical faults caused by rubbing or pinched wires
• Keeps harnesses neatly routed for easier service and reduced strain on connections
• Useful when you see visible wear on insulation or wires rubbing against chassis parts

• One cover-wire as shown

• Disconnect power to the appliance before inspecting or replacing wiring components
• Verify correct routing and orientation; secure into existing clips or mounting locations
• Do not splice, modify, or stretch the part; replace if damaged
• If you see melted insulation, burnt wiring, or connector damage, replace affected wiring/components per OEM guidance

This replacement clip secures the defrost heater to the evaporator so the heater stays in proper contact and defrosts frost buildup efficiently. Durable, OEM-style retention clip designed for refrigerators. What it does

• Secures the defrost heater to the evaporator assembly to ensure consistent defrost cycles
• Prevents the heater from shifting or coming loose, which can cause frost buildup or interrupted defrosting
• Helps maintain proper contact for efficient heat transfer during defrost
• Small, inexpensive part that can prevent larger ice/frost-related issues

• Disconnect power to the appliance before accessing the evaporator compartment.
• Handle the evaporator fins and heater element carefully to avoid damage.
• Typically installs with basic hand tools; replace any damaged or corroded clips.

This electronic control is the console control board that manages oven functions and user inputs, restoring proper cycle selection and display feedback for affected ranges. It replaces a failed control to return responsive touch and timed operations. What it does:

• Controls oven heat cycles, timers and front-panel commands
• Processes user inputs from buttons/knobs and updates the display
• Helps correct symptoms like unresponsive controls, error codes, or no display activity
• Regulates timed functions such as delayed start and bake/ broil cycles

• Disconnect power at the breaker before beginning any repair
• Handle the control board carefully; avoid static discharge and bending connectors
• Some disassembly of the console may be required; keep fasteners and panels organized

This pan cover assembly protects the oven/range pan area and helps keep spills, crumbs and heat away from internal components for cleaner operation and easier cleanup. It restores the pan opening with a finished, replaceable cover. What it does:

• Shields the pan area from food drips and debris that can burn or smoke during use
• Helps direct heat and prevents direct contact with underlying parts
• Prevents gaps that allow spills into cavities, reducing odors and cleanup needs
• Replaces damaged, warped or missing covers that can cause uneven appearance or trapping of debris

• Disconnect power to the appliance before beginning any service.
• Remove racks and existing pan cover per your model's service instructions to access the cover area.
• Use basic hand tools; handle edges carefully to avoid cuts or damage to the finish.
• Test fit and confirm proper seating before restoring power.

This user interface (UI) assembly controls the front touch/display functions on the appliance, restoring responsive controls and normal display operation for oven/range features. Replaces a worn, damaged, or unresponsive control panel. What it does:

• Provides the touchpads, display, and control logic for setting temperatures, timers, and modes
• Sends user commands to the oven/range control system so selected functions start correctly
• Commonly replaces a panel that is unresponsive, has missing or flickering display segments, or shows error codes related to the UI
• Restores visible button/indicator feedback and normal front-panel operation

• One user interface (UI) assembly (stealth) as shown

• Disconnect power at the breaker before starting to avoid shock or damage
• Handle the assembly carefully to avoid damaging the display or ribbon connectors
• Verify connector seating and routing; secure any mounting screws and trim after installation

This air duct clip secures an appliance's air duct or vent to the housing, keeping airflow channels properly aligned and reducing air leaks. A simple replacement that restores correct duct positioning and minimizes airflow issues. What it does:

• Holds the air duct or vent in place to maintain proper airflow alignment
• Prevents the duct from slipping or separating from the housing
• Helps reduce air leaks that can affect performance or cause noise
• Fits where a small plastic/metal retainer is required to secure ducting

• One air duct clip/retainer

• Disconnect power before servicing the appliance to avoid shock or injury
• Use basic hand tools to remove the old clip and snap or screw the new clip into place
• Handle carefully to avoid breaking plastic tabs; the clip fully engages the duct and housing
• If the clip doesn't fit securely, re-check the duct orientation and mounting position

Size: 3/16 inch.

Size: 5/16 inch.

Size: 3/8 inch.

Size: 3/4 inch.

This replacement cover is a molded housing piece that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while helping reduce noise and debris entry. What it does:

• Protects internal components and wiring from physical damage and contamination
• Helps reduce vibration noise and rattling by covering exposed parts
• Restores a finished appearance to the appliance cabinet or control area
• Can prevent loose parts from shifting during operation

• Disconnect power (unplug appliance or switch off breaker) before beginning service
• Use basic hand tools; support the appliance panel while removing fasteners
• Handle with care to avoid scratching painted surfaces or breaking tabs

This ice door covers the dispenser chute to help keep cold air in and prevent spills when the ice dispenser is not in use. Replaces a cracked, bent, or non-sealing chute door to restore normal dispenser operation. What it does:

• Seals the ice dispenser opening to reduce warm air and moisture from entering the freezer compartment
• Allows ice to pass through when actuated and stays closed otherwise to prevent drips and debris
• Helps stop ice from falling out or jamming when the dispenser is at rest
• Common symptom fixes: dispenser door won't close, visible cracks or damage, ice falling out, or excess frost near the chute

• One ice dispenser door

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim or access panel per your model's service instructions to reach the door assembly
• Handle plastic parts carefully to avoid cracking; confirm correct orientation before reassembly

This is an evaporator that is located inside many refrigerators. It has a part to play in ensuring the items inside the appliance stay cold. When the refrigerator turns from a liquid into a gas through evaporation, it cools the area nearby and makes it ideal for storing perishable food items. The evaporator pulls air from the refrigerator and blows it over the coils to keep it at the appropriate temperature. There are several signs that the evaporator is damaged or no longer working correctly. Sometimes it will make a chirping or squealing noise. It may cause the refrigerator to be too warm, which may cause issues with the food items inside. Frost buildup on the coils is also a bad sign. If the evaporator is damaged, it needs to be replaced. Unplug the refrigerator and remove the panel over the evaporator. Remove the clamps to uninstall the part. The new part can be installed in the same place. Make sure to test before use.This evaporator is made to be compatible with Maytag, Whirlpool, KitchenAid, and Kenmore refrigerators. It is directly sourced from the manufacturer and sold on an individual basis. This is an authentic OEM replacement component.

Size: 1/4 lb.