Gtd 65G8s J3ws Parts

This plate motor drives the microwave/oven turntable, keeping the glass tray rotating for even cooking and heating. Replaces a worn or failed motor to restore tray rotation and reduce uneven heating. What it does:

• Turns the glass turntable so food cooks evenly
• Stops rotation or hesitates when motor fails or wears out
• May make buzzing, grinding, or intermittent noises before failing
• Prevents the turntable from rotating if the motor no longer engages

• One replacement plate (turntable) motor

• Disconnect power before servicing to avoid shock; verify unit is fully powered off
• Remove the turntable glass and roller guide to access the motor underneath the oven/microwave floor
• Typical install requires removing interior fasteners and unplugging the motor connector; retain hardware for reassembly

This motor and blower assembly powers airflow and drum rotation in compatible laundry appliances, restoring proper ventilation and tumble performance. Replaces the single combined motor/blower unit so the appliance can move air and dry clothes efficiently. What it does:

• Drives the blower wheel to circulate air through the drum and exhaust system
• Powers drum rotation where applicable so loads tumble evenly
• Helps remove moisture and lint from the drying chamber
• Symptoms of a failing unit: little or no airflow, poor drying, unusual noise, or the drum not turning

• One motor and blower assembly

• Disconnect power before servicing to avoid shock or injury
• Handle the blower wheel and motor carefully to avoid bending fins or damaging wiring
• Ensure mounting hardware and duct connections are secure for proper airflow

This gasket is a direct-fit door seal that restores the appliance's airtight closure to help maintain proper temperature and reduce energy loss. It replaces worn, torn, or compressed seals to improve performance. What it does:

• Creates an airtight seal around the door to keep conditioned air inside
• Helps prevent warm air intrusion, frost buildup, and excess cycling
• Reduces condensation and keeps food at intended temperatures
• Restores efficient operation when the original seal is cracked or deformed

• One door gasket

• High-level replacement: remove the old gasket, clean the gasket channel, then align and press the new gasket into the channel until fully seated
• Inspect gasket mounting tabs or retainer channels and reuse any clips or screws if applicable
• Work with the appliance powered off; unplug or switch off power for safety where appropriate
• If the gasket feels stiff, warm it gently for easier fitting; avoid sharp tools that could damage the new gasket

This combustion chamber is the metal housing that surrounds and directs the gas burner flame in a gas dryer, protecting surrounding components and guiding combustion for reliable heating performance. What it does

• Houses and aligns the burner assembly and igniter to ensure proper flame direction
• Channels exhaust and combustion flow away from sensitive parts
• Helps prevent heat damage to the dryer cabinet and nearby components
• Symptoms this can fix: poor or uneven heating, burner flame misalignment, or burner noise from loose housing

• One combustion chamber housing

• Turn off and unplug the dryer and shut off the gas supply before servicing
• Inspect and replace any damaged gaskets or mounting hardware for a proper seal
• Use basic hand tools; avoid bending or deforming the chamber during installation

This wire group assembly routes power and signals between controls and components, restoring reliable electrical connections for proper appliance operation. Fits replacement needs where the original harness is damaged, burnt, or has failed terminals. What it does:

• Replaces the main electrical harness that delivers power and control signals to internal components
• Restores missing or intermittent function caused by broken, frayed, or overheated wires
• Helps resolve symptoms like no power to components, intermittent operation, or visible wiring damage
• Provides factory-style connectors for proper fit and secure connection

• Disconnect all power before starting — risk of shock or injury if energized
• Compare the harness to the original for connector types and routing before installing
• Route wires to avoid sharp edges and hot surfaces; secure with existing clips or ties
• If connectors are damaged or terminals are loose, replace the harness rather than splicing

This genuine replacement side cabinet panel restores the appliance's exterior finish and protects internal components from dust and accidental contact. Ideal for repairing dents, corrosion, or missing/damaged side panels to improve appearance and safety. What it does

• Covers and protects the refrigerator/freezer cabinet side, shielding internal parts and wiring.
• Restores a smooth, finished exterior when the original panel is dented, rusted, or missing.
• Helps prevent dust and debris from entering service areas along the side of the cabinet.
• Improves overall appliance appearance after accidental damage or corrosion.

• Disconnect power to the appliance before starting any repair.
• Remove any trim, screws, or fasteners securing the old panel; handle edges carefully to avoid cuts.
• Use appropriate tools and a helper if panel size/weight requires two people to maneuver.

This drum assembly is the rotating tub that holds and tumbles clothes in the dryer, restoring proper load rotation for efficient drying and gentle fabric handling. It replaces a worn or damaged drum to eliminate rubbing and uneven tumbling. What it does

• Provides the rotating drum surface for clothes to tumble during a dry cycle
• Restores smooth rotation if the original drum was dented, cracked, or worn
• Addresses rubbing, scraping, or fabric-catching noises caused by drum damage
• Helps correct uneven tumbling or garments sticking to the drum surface

• One drum assembly

• Disconnect power (and gas, for gas dryers) before beginning service
• Drum assemblies are heavy and may require two people to remove and install safely
• Inspect or replace related parts (belt, rollers, idler, seals) if they show wear