Gtd45gasjws Parts

These duct trap slides replace the moving rails that let the dryer's duct trap assembly open and close smoothly, helping restore proper vent access and reduce rattling or binding. Designed to match OEM fit and function. What it does:

• Guides the dryer duct trap so the trap door opens and closes smoothly
• Helps prevent the trap from sticking, misaligning, or making noise
• Restores proper vent access for cleaning and maintenance
• Works with the duct trap assembly to maintain a secure fit

• Recommended for experienced DIYers; unplug appliance and move away from the wall before beginning
• Remove front access panel or lint trap assembly to reach trap slides
• Inspect surrounding clips and fasteners; replace any damaged hardware to ensure secure fit

This 120V replacement power cord restores household current to gas ranges and ovens that use a corded connection for clocks, lights, igniters and controls. It provides a straightforward way to replace a damaged or worn cord and regain safe power to the appliance. What it does

• Supplies 120-volt power from the wall outlet to the range/oven's control system, clock and lights.
• Restores ignition and control functions when a frayed or broken cord prevents the appliance from receiving power.
• Replaces cords that show signs of burning, cracking, loose connections, or exposed wiring.
• Reduces risk of electrical faults caused by damaged insulation or terminals.

• One 120V power cord

• Disconnect power at the circuit breaker or unplug the appliance before starting; ensure the appliance is de-energized.
• Route and secure the cord to avoid pinching; tighten terminal screws to manufacturer torque recommendations.

This replacement screw fastens appliance panels, brackets, and trim. The 8-18 thread with 1-3/4-inch length provides reliable bite in sheet metal or plastic, restoring a secure fit when an original fastener is missing or damaged.

• Secures panels, brackets, and trim to the cabinet or frame
• Replaces lost, stripped, or corroded fasteners
• Helps address loose or rattling panels, minor gaps, or misalignment
• Appropriate for sheet-metal applications that require ~1-3/4-inch reach

• Disconnect power before servicing; wear cut-resistant gloves
• Support the panel or part being fastened and use the correct driver for the screw head
• Start threads by hand to avoid cross-threading; do not overtighten into plastic or thin metal
• Repair or replace the anchor before installing

This variable buzzer provides audible alerts for cycle end, timers, and error notifications on compatible GE appliances. It restores clear, adjustable-tone beeps that signal user and diagnostic events. What it does

• Produces variable-tone audible signals for timers, end-of-cycle notices, and alerts
• Replaces a failed, intermittent, or silent buzzer to restore audible feedback
• Works with the appliance control board to emit distinct tones for different events
• Helps identify audible error codes when troubleshooting

• One buzzer assembly

• Disconnect power to the appliance before beginning any service
• Access typically requires removing the control panel or console; handle panels and clips gently
• Match the connector and mounting location to the original part before installing

This replacement side panel restores the exterior cabinet surface and protects internal components from dust and damage while keeping the appliance looking finished. It matches OEM fit and finish for a seamless appearance. What it does:

• Replaces a dented, scratched, or corroded cabinet side to restore the appliance's exterior
• Shields wiring, insulation, and internal components from accidental contact and debris
• Helps maintain proper airflow gaps and enclosure integrity where applicable
• Improves overall appearance for a like-new look

• One replacement side panel

• Disconnect power (and water if applicable) before starting any repair
• Remove trim, screws, or mounting clips securing the existing panel; retain fasteners unless replacements are provided
• Align the new panel carefully and secure with the original mounting hardware

This gas diffuser directs and evens the burner flame for reliable cooking performance. It helps stabilize heat distribution so burners light and heat more consistently across cookware. What it does:

• Spreads and evens gas flame to reduce hot spots and uneven cooking
• Helps stabilize burner ignition and maintain consistent flame shape
• Prevents direct flame contact with surrounding components
• Addresses symptoms like uneven heating, unstable flame, or partial burner operation

• One gas diffuser

• Turn off the gas supply and unplug the appliance before servicing
• Use basic hand tools; avoid overtightening or distorting the part
• If corrosion or sealed fasteners are present, replace affected hardware and check surrounding components

This ground strap assembly provides a secure electrical path from the appliance chassis to the grounding point, helping maintain proper grounding and reduce shock and interference risks. Designed to replace a worn or damaged grounding connection. What it does:

• Connects the appliance cabinet to the designated grounding point to complete the electrical ground path
• Restores a solid metal-to-metal grounding connection when original strap is corroded, broken, or loose
• Helps prevent arcing, intermittent electrical faults, and improper grounding-related behavior
• Supports safe operation of controls and reduces the risk of electrical shock from energized components

• One ground strap assembly (quantity: 1)

• Disconnect power (unplug or shut off breaker) before inspecting or replacing grounding components
• Use basic hand tools to remove and reinstall mounting screws; ensure ring terminals sit flat under screw heads
• Tighten fasteners to firm contact without over-torquing; verify strap is free of paint, corrosion, or debris at contact points

The Shoe Drying Rack is an OEM accessory component specifically designed for select GE dryers. As an added feature, this rack provides a convenient way to dry shoes along with regular laundry items. It allows wet shoes to be tumbled gently while being fully ventilated to dry effectively.

Symptoms of a bad shoe drying rack include:

• Broken or cracked rack supports that collapse the structure
• Missing hooks or attachment points to secure the rack in place  
• Rust, corrosion, or other damage that compromises its functionality

Causes of a bad shoe drying rack can include normal wear and tear over extended use, exposure to excessive heat levels, or damage from overloading or improper handling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This factory screw fastens appliance panels, brackets, and internal components. Replacing missing or damaged hardware restores a secure fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, and assemblies as designed for your model
• Replaces missing, stripped, or corroded hardware
• Helps resolve loose panels, vibration/rattling, or misalignment
• Maintains proper fit and function of mounted components

• Disconnect power; shut off gas and water before service
• Match to the original screw and location; order the quantity your model requires
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Refer to your model's parts diagram or service information for exact placement

This kit converts a compatible gas dryer from natural gas to liquid propane (LP). Use it when installing the dryer on a propane supply to help ensure proper burner operation, safe ignition, and consistent heat output.

• Converts fuel configuration from natural gas (NG) to liquid propane (LP) for specified gas dryers
• Provides correct burner orifice sizing and setup for propane operation
• Helps maintain proper flame characteristics and drying performance on LP
• Designed for NG-to-LP conversions only

• Installation should be performed by a service professional; follow local codes and the included instructions
• Disconnect electrical power and shut off the gas supply before servicing; allow the dryer to cool
• Replace the burner orifice and adjust the gas pressure regulator as directed; leak-test all gas connections after conversion

This backsplash assembly is the dryer's rear control console. It supports and protects the user controls and wiring, restoring a secure fit and clean appearance when the original panel is cracked, warped, or broken.

• Forms the rear control console/backguard of the dryer
• Provides mounting points for user controls and helps protect internal wiring
• Keeps knobs and switches aligned and secure
• Helps resolve: cracked or broken console, loose or recessed controls, rattling/vibration, or difficulty securing the control panel

• Disconnect power; turn off gas supply for gas models
• Remove control knobs and any screws/clips securing the existing console
• Transfer existing controls and hardware to the new backsplash as needed
• Reinstall the console and verify proper control operation before use

This Valve & Burner Assembly is an OEM part for GE dryers. Responsible for controlling the flow of gas to the burner where it is ignited to produce heat. This assembly ensures that the dryer heats up efficiently and safely, playing a vital role in the overall performance and reliability of the appliance. 

The need for replacement can stem from wear and tear, functional degradation, or issues with gas flow regulation.

Symptoms of a faulty Valve & Burner Assembly include:

• Insufficient or no heat production in the dryer.
• Unusual noises or smells indicating gas leakage or improper combustion.
• The dryer takes longer to dry clothes, indicating inefficient heating.
• The dryer failed to start the heating cycle.
• Visible signs of wear or damage to the assembly components.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This rotary switch is the user control that selects heat/settings for the appliance, restoring reliable selection and responsive control of cycles or temperature settings. It replaces a worn or non-responsive selector control. What it does:

• Switches between user-selected settings or heat levels when the control knob is turned
• Restores proper electrical contact for consistent operation and accurate selection
• Common symptom: knob turns but appliance does not change setting or cycle
• Common symptom: intermittent operation or loss of selected function

• One rotary selector switch

• Disconnect power to the appliance before servicing to avoid shock hazard
• Access typically requires removing the console or control panel; keep fasteners organized
• Verify knob alignment and any retaining clip or harness connector seating during reassembly

This white front panel restores the visible exterior and protects the control area on compatible GE ranges. It replaces cracked, dented or discolored panels to give the appliance a clean, finished appearance and support for mounted components. What it does:

• Covers and protects the control console and internal components from spills, heat, and impact
• Restores worn or damaged cosmetic finish and helps the range look like new again
• Provides the proper mounting surface and alignment for trim and controls
• Helps prevent debris from entering internal compartments that can affect operation

• Disconnect power (and gas if applicable) before starting any service to avoid shock or injury
• Remove the existing front panel by removing retaining screws; handle edges carefully to avoid cuts
• Reuse original mounting hardware unless new hardware is explicitly included

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged