Gtd550hgd4ww Parts

This heater housing directs heated air from the dryer's heating assembly into the drum and protects internal components. It restores proper airflow routing for consistent drying and helps contain the heating element and sensors. What it does:

• Houses and protects the dryer's heating element and related sensors/thermostats
• Channels heated air into the drum for efficient drying
• Prevents hot spots and directs exhaust airflow to venting system
• Symptoms a failing housing may be linked with: poor or uneven drying, overheating/shutdowns, or unusual smells

• One heater housing

• Disconnect power to the appliance before starting any repair; electric shock and burn hazards exist
• Basic disassembly typically involves removing the dryer front or top and drum to access the housing; follow OEM service instructions
• Inspect heating element, thermostats, and wiring while replacing the housing; replace any damaged components
• Use care handling sharp sheet-metal edges and ensure all seals/gaskets are properly seated for good airflow

The Water Valve is an OEM part for GE electric dryers. Located near the bottom of the machine, it controls water flow into the condenser system during moisture-sensing cycles.

The moisture sensing function uses this valve to introduce precise amounts of water vapor into the exhaust air stream periodically. This allows the condenser to capture moisture readings accurately and determine optimal cycle time based on humidity levels. 

Causes of failure include mineral buildup restricting flow, worn seals enabling leaks, or misaligned internal components hindering valve movement.

Symptoms of a faulty water valve are: 

• Loss of moisture sensing ability
• Incomplete or improper readings affecting cycle times  
• Water leaks from the valve area
• Failure to inject water vapor as needed

This part is also compatible with some Kenmore models using GE components.

This electric dryer wiring harness routes power and signals between the dryer's terminal block and internal components to restore reliable electrical connections and safe operation. It replaces a damaged or worn main harness to help restore normal drying performance. What it does:

• Carries electrical power from the dryer's terminal block to internal components
• Replaces frayed, burned, or disconnected wiring that can cause intermittent power or no-heat conditions
• Restores secure connections to motors, heaters, and control circuits to prevent arcing
• Helps resolve symptoms like no power to drum/heater, blown fuses, or visible wiring damage

• One complete dryer wiring harness assembly

• Always disconnect all power before servicing the dryer to avoid shock or injury
• Inspect connectors and terminal block for heat or burn damage and replace if needed
• Route and secure the harness following the dryer's wiring paths; avoid contact with moving parts or sharp edges

This replacement side panel restores the exterior cabinet surface and protects internal components from dust and damage while keeping the appliance looking finished. It matches OEM fit and finish for a seamless appearance. What it does:

• Replaces a dented, scratched, or corroded cabinet side to restore the appliance's exterior
• Shields wiring, insulation, and internal components from accidental contact and debris
• Helps maintain proper airflow gaps and enclosure integrity where applicable
• Improves overall appearance for a like-new look

• One replacement side panel

• Disconnect power (and water if applicable) before starting any repair
• Remove trim, screws, or mounting clips securing the existing panel; retain fasteners unless replacements are provided
• Align the new panel carefully and secure with the original mounting hardware

This steam kit is the OEM steam generator assembly that supplies steam for steam-refresh and wrinkle-care cycles. It restores the appliance's ability to produce steam for improved fabric care and odor removal. What it does

• Heats and releases water as steam into the drum during steam cycles to help relax wrinkles and freshen clothes.
• Addresses weak or no-steam symptoms when the dryer runs steam cycles but garments remain untreated.
• Works with the appliance's control system to deliver steam only during designated cycle phases.
• Helps reduce the need for ironing by loosening fabric fibers during the cycle.

• One steam generator assembly (steam kit) as shown.

• Disconnect power before starting any repair to avoid shock or flooding.
• Suitable for technicians or experienced DIYers; follow the appliance service manual for disassembly and routing of water/steam lines.
• Inspect and replace any brittle or cracked tubing and seals to prevent leaks; test for proper steam delivery after installation.
• Do not operate the dryer with missing or damaged panels; ensure all connectors are secure.

This replacement screw restores secure fastening for appliance components, helping stop loose panels and rattles. Use it to replace a missing or stripped fastener and keep assemblies aligned and stable. What it does

• Fastens panels, brackets, or small assemblies to maintain proper alignment
• Prevents vibration-related noise and movement from loose parts
• Replaces missing, worn, or stripped screws that allow components to shift
• Simple hardware solution that restores secure connections

• Disconnect power and water before beginning any repair
• Use the correct screwdriver or nut driver to avoid cam-out or damage
• Start threads by hand to avoid cross-threading; tighten until snug
• Do not overtighten—excess torque can strip threads or damage parts

This is a 10-16 x 1/2 screw used to fasten small appliance components and panels; it restores secure attachment and helps stop rattling or loose parts for reliable operation. What it does:

• Secures panels, brackets, and small assemblies to the appliance
• Prevents movement that can cause noise, vibration or misalignment
• Restores proper fit where a worn or missing screw caused loose parts
• Matches OEM size so replacement fits original mounting points

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and do not overtighten—stop when snug to avoid damage
• Replace like-for-like; if corrosion or stripped threads are present, repair or replace the mating part as needed

This socket assembly is the replacement connector that restores a secure electrical connection between wiring and the appliance component, helping eliminate intermittent power or component failure caused by a damaged socket. What it does:

• Provides a secure electrical connection for the targeted component to restore reliable operation
• Replaces a worn, cracked, or burnt socket that can cause intermittent power, no operation, or arcing
• Holds wiring and the component plug in correct alignment to prevent loose contacts
• Helps prevent heat buildup or further wiring damage when the original socket is compromised

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Inspect surrounding wiring and connectors; replace any damaged wires or terminals

This main wiring harness routes power and signals between the dryer's control and major components, restoring reliable electrical connections so the dryer can run cycles and heat as intended. What it does

• Carries power and control signals between the timer/control, motor, heating element and safety switches
• Replaces damaged, burnt, or disconnected wiring that can prevent the dryer from starting
• Addresses intermittent power, sporadic operation, or loss of heating when caused by wiring faults
• Restores proper connector fit and circuit continuity when original harness terminals are corroded or loose

• Always disconnect the dryer from power (unplug or shut off breaker) before beginning work
• Verify correct routing and secure connections to match the original harness; avoid pinching or sharp bends
• Inspect mating connectors and terminals for damage; replace if necessary

This gas diffuser directs and evens the burner flame for reliable cooking performance. It helps stabilize heat distribution so burners light and heat more consistently across cookware. What it does:

• Spreads and evens gas flame to reduce hot spots and uneven cooking
• Helps stabilize burner ignition and maintain consistent flame shape
• Prevents direct flame contact with surrounding components
• Addresses symptoms like uneven heating, unstable flame, or partial burner operation

• One gas diffuser

• Turn off the gas supply and unplug the appliance before servicing
• Use basic hand tools; avoid overtightening or distorting the part
• If corrosion or sealed fasteners are present, replace affected hardware and check surrounding components

This ground strap assembly provides a secure electrical path from the appliance chassis to the grounding point, helping maintain proper grounding and reduce shock and interference risks. Designed to replace a worn or damaged grounding connection. What it does:

• Connects the appliance cabinet to the designated grounding point to complete the electrical ground path
• Restores a solid metal-to-metal grounding connection when original strap is corroded, broken, or loose
• Helps prevent arcing, intermittent electrical faults, and improper grounding-related behavior
• Supports safe operation of controls and reduces the risk of electrical shock from energized components

• One ground strap assembly (quantity: 1)

• Disconnect power (unplug or shut off breaker) before inspecting or replacing grounding components
• Use basic hand tools to remove and reinstall mounting screws; ensure ring terminals sit flat under screw heads
• Tighten fasteners to firm contact without over-torquing; verify strap is free of paint, corrosion, or debris at contact points

This front console panel replaces a damaged or worn exterior panel to restore your appliance's appearance and protect the underlying controls. It provides a clean surface and helps keep the control area sealed from spills and debris. What it does:

• Covers and protects the control console and underlying components from everyday wear.
• Restores a uniform exterior finish if the original panel is cracked, scratched, or faded.
• Helps prevent moisture and food debris from reaching electronic controls and switches.
• Improves usability and appearance when buttons, display trim, or surrounding trim are missing or damaged.

• One panel front

• Disconnect power to the appliance before starting; follow basic electrical safety.
• Most installs require removing screws or clips that secure the existing panel; keep original fasteners for reuse if possible.
• Handle carefully to avoid scratching the new panel during installation.
• If the panel covers electronic controls, avoid direct contact with circuit boards and connectors.

The Backsplash is an OEM part for GE dryers. The backsplash provides a user-friendly interface for selecting various drying options, such as cycle type, temperature, and special features. 

A bad backsplash control panel can occur due to wear and tear, electrical malfunctions, or physical damage. If you notice symptoms such as unresponsive buttons, error codes on the display, or the panel not lighting up, it may be time to replace this part.

Symptoms of a bad backsplash control panel include:

• Cosmetic damage
• Buttons not working
• Panel not lighting up

Regain full control over your GE dryer's settings by replacing the faulty backsplash control panel with this genuine OEM part.

This GE replacement part is designed specifically for GE dryers and may not be compatible with other brands.
 

This factory screw fastens appliance panels, brackets, and internal components. Replacing missing or damaged hardware restores a secure fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, and assemblies as designed for your model
• Replaces missing, stripped, or corroded hardware
• Helps resolve loose panels, vibration/rattling, or misalignment
• Maintains proper fit and function of mounted components

• Disconnect power; shut off gas and water before service
• Match to the original screw and location; order the quantity your model requires
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Refer to your model's parts diagram or service information for exact placement

The Shoe Drying Rack is an OEM accessory component specifically designed for select GE dryers. As an added feature, this rack provides a convenient way to dry shoes along with regular laundry items. It allows wet shoes to be tumbled gently while being fully ventilated to dry effectively.

Symptoms of a bad shoe drying rack include:

• Broken or cracked rack supports that collapse the structure
• Missing hooks or attachment points to secure the rack in place  
• Rust, corrosion, or other damage that compromises its functionality

Causes of a bad shoe drying rack can include normal wear and tear over extended use, exposure to excessive heat levels, or damage from overloading or improper handling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.