Gtd550hgd4ww Parts

This kit converts a compatible gas dryer from natural gas to liquid propane (LP). Use it when installing the dryer on a propane supply to help ensure proper burner operation, safe ignition, and consistent heat output.

• Converts fuel configuration from natural gas (NG) to liquid propane (LP) for specified gas dryers
• Provides correct burner orifice sizing and setup for propane operation
• Helps maintain proper flame characteristics and drying performance on LP
• Designed for NG-to-LP conversions only

• Installation should be performed by a service professional; follow local codes and the included instructions
• Disconnect electrical power and shut off the gas supply before servicing; allow the dryer to cool
• Replace the burner orifice and adjust the gas pressure regulator as directed; leak-test all gas connections after conversion

The Trap Duct Assembly is an OEM part for GE dryers. It is responsible for guiding airflow through the dryer and out the vent, while also trapping lint and debris before it exits the dryer. 

Causes of a bad trap duct assembly can include excess buildup of lint that clogs the assembly, damage or cracks in the assembly that reduce airflow, or loose or missing components. 

Symptoms of a bad Trap Duct Assembly include: 

• Reduced or inefficient drying times 
• Vibrating or rattling noises from the vent area
• Excessive lint building up inside the dryer
• Vent blockages or restrictions 

This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Selector Knob is an OEM part for GE washing machines. It allows users to directly choose specific wash settings like temperature, spin speed, and soil level from the control panel interface.

Symptoms of a bad selector knob include:

• Knob inadvertently moves between positions during washing   
• Settings do not stay firmly engaged and jump to different options
• Illegible or faded lettering obscuring chosen temperature/settings
• Difficult, grinding, or inconsistent movement-making selection challenging  

Causes can be repeated rotational use over cycles causing wear, or loose, corroded mounting points compromising secure fitting. 

This GE OEM replacement selector knob ensures reliable cycle programming. Compatible with some Hotpoint, RCA, and Kenmore models as well, it maintains convenient setting adjustment. 

This backsplash assembly is the dryer's rear control console. It supports and protects the user controls and wiring, restoring a secure fit and clean appearance when the original panel is cracked, warped, or broken.

• Forms the rear control console/backguard of the dryer
• Provides mounting points for user controls and helps protect internal wiring
• Keeps knobs and switches aligned and secure
• Helps resolve: cracked or broken console, loose or recessed controls, rattling/vibration, or difficulty securing the control panel

• Disconnect power; turn off gas supply for gas models
• Remove control knobs and any screws/clips securing the existing console
• Transfer existing controls and hardware to the new backsplash as needed
• Reinstall the console and verify proper control operation before use

The HARNESS SENSOR ASSEMBLY is an OEM part for GE electric dryers. It is a comprehensive harness assembly that includes sensors to monitor temperature and moisture levels during drying cycles. These sensors relay crucial data to the dryer control board allowing for optimized cycle times and prevention of over-drying.

Symptoms of a bad harness sensor assembly include:

• Dryer cycles not running for full expected time durations   
• Clothes continually coming out damp rather than fully dried
• Dryer failing to advance through programmed cycles properly
• Error codes or faults displayed on the control panel 

Causes can arise from damaged or loose wiring connections, faulty sensors that provide inaccurate readings, or general failure over time due to environmental exposure.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This Valve & Burner Assembly is an OEM part for GE dryers. Responsible for controlling the flow of gas to the burner where it is ignited to produce heat. This assembly ensures that the dryer heats up efficiently and safely, playing a vital role in the overall performance and reliability of the appliance. 

The need for replacement can stem from wear and tear, functional degradation, or issues with gas flow regulation.

Symptoms of a faulty Valve & Burner Assembly include:

• Insufficient or no heat production in the dryer.
• Unusual noises or smells indicating gas leakage or improper combustion.
• The dryer takes longer to dry clothes, indicating inefficient heating.
• The dryer failed to start the heating cycle.
• Visible signs of wear or damage to the assembly components.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This OEM part is a control board for washing machines. The control board is the main computer that controls the essential functions of the washer. If the washer is no longer spinning, rinsing, or draining properly, it might be time for a new control board. Luckily, replacing the control board is a simple process.To replace the control board, make sure the washer is unplugged. Pull the washer out to gain access to the upper back panel of the appliance. Remove the upper back panel and locate the old control board. Take note of the orientation of the wires with a phone camera. Remove the wire harness and individual wires. Connect the wires to the new control board in the correct order. Snap the control board back into its original place and reinstall the top panel of the washing machine.This genuine replacement control board is compatible with General Electric, Hotpoint, and RCA brand washing machines.

This rotary switch is the user control that selects heat/settings for the appliance, restoring reliable selection and responsive control of cycles or temperature settings. It replaces a worn or non-responsive selector control. What it does:

• Switches between user-selected settings or heat levels when the control knob is turned
• Restores proper electrical contact for consistent operation and accurate selection
• Common symptom: knob turns but appliance does not change setting or cycle
• Common symptom: intermittent operation or loss of selected function

• One rotary selector switch

• Disconnect power to the appliance before servicing to avoid shock hazard
• Access typically requires removing the console or control panel; keep fasteners organized
• Verify knob alignment and any retaining clip or harness connector seating during reassembly

This duct trap redirects and contains exhaust from the appliance's ventilation opening to help guide airflow and capture debris before it enters the main ductwork. It's a direct-replacement service part designed to restore proper vent routing and reduce buildup in the duct path. What it does:

• Funnels exhaust from the appliance outlet into the duct system for proper ventilation
• Helps prevent large debris and lint from entering the main duct run
• Restores correct vent alignment and sealing for efficient airflow
• Commonly replaced when damaged, cracked, or allowing exhaust leaks

• One duct trap

• Disconnect power to the appliance before starting any work; if gas is present, follow gas-safety shutoff procedures
• Access may require removing the rear/discharge panel or lowering the appliance; keep track of fasteners
• Inspect adjoining ductwork and seals; replace or reseal with appropriate high-temp duct tape when reinstalling
• Wear gloves and eye protection

This white front panel restores the visible exterior and protects the control area on compatible GE ranges. It replaces cracked, dented or discolored panels to give the appliance a clean, finished appearance and support for mounted components. What it does:

• Covers and protects the control console and internal components from spills, heat, and impact
• Restores worn or damaged cosmetic finish and helps the range look like new again
• Provides the proper mounting surface and alignment for trim and controls
• Helps prevent debris from entering internal compartments that can affect operation

• Disconnect power (and gas if applicable) before starting any service to avoid shock or injury
• Remove the existing front panel by removing retaining screws; handle edges carefully to avoid cuts
• Reuse original mounting hardware unless new hardware is explicitly included

This main wiring harness routes power and signals between the dryer's controls and internal components so the dryer can operate reliably. It restores proper electrical connectivity for affected circuits. What it does

• Provides the primary electrical connections between the control console, motor, heating circuit and sensors
• Restores power and signal paths that allow the dryer to start and run
• Resolves symptoms such as no start, intermittent operation, or control/heat-related failures
• Replaces a damaged, burnt, or fractured harness that causes open or shorted circuits

• Disconnect power at the breaker or unplug the dryer before servicing
• Compare the new harness to the old one and route wires exactly as originally installed
• Reconnect all plugs and terminals fully; ensure secure, corrosion-free connections

This complete door assembly replaces a damaged or non-closing door to restore proper sealing and safe operation. It provides the outer panel, inner panel, and hardware needed for a factory-style repair. What it does

• Replaces cracked or broken door panels and visible damage that prevents normal use
• Restores proper door alignment and sealing to help the appliance close and latch correctly
• Replaces worn or loose hinges and mounting points that cause sagging or uneven gaps
• Stops drafts, light leaks, and helps maintain internal temperature by restoring a solid door fit

• One complete door assembly

• Disconnect power (and water, if applicable) before starting any repair
• Handle glass components carefully; wear gloves and eye protection to avoid injury
• Door assemblies are often heavy or awkward — a second person may be needed for safe alignment
• Follow manufacturer instructions for correct torque and seal seating

This complete dryer drum assembly replaces the rotating tub that holds and tumbles clothes, restoring proper drum movement and drying performance. Fits compatible GE/TAPPAN dryers and brings back secure, balanced load tumbling. What it does:

• Replaces the dryer's spinning drum so clothes tumble freely during cycles
• Restores even airflow and contact with the heating element for consistent drying
• Stops squeaks, scraping, or grinding caused by a damaged or warped drum
• Helps eliminate clothes catching or rubbing on drum edges that can cause wear

• One complete dryer drum assembly

• Disconnect power before servicing; this part requires panel and/or front removal
• Use basic hand tools; lifting the drum may require two people to avoid strain
• Inspect glide rings, rollers, seals, and belt while replacing the drum and replace as needed

This wire group assembly routes electrical power and signals between oven components to restore proper operation and safety. Replacing a damaged harness helps stop intermittent power, faulty controls, or non-working elements. What it does:

• Connects control board, switches, heating elements and sensors so components receive correct power and signals.
• Replaces frayed, burned or broken wires that can cause intermittent operation or loss of function.
• Helps resolve symptoms like burners or oven elements not heating, controls not responding, or lights failing.
• Keeps wiring organized and secured to reduce stress and chafing that can lead to shorts.

• Disconnect all power (unplug or shut off breaker) before beginning any repair.
• Compare new harness to the original for connector types and routing before removing the old part.
• Route harness along original clips and fasteners; avoid contact with sharp edges or hot surfaces.
• If wires show heat damage at terminals, inspect connected components and replace as needed.

This ground screw secures the appliance chassis ground connection to the cabinet, restoring a reliable earth path for safe operation and reducing risk of electrical faults. Simple replacement keeps electrical components properly grounded. What it does

• Secures the ground wire or grounding strap to the appliance chassis to maintain a safe earth connection.
• Restores proper grounding when the original screw is missing, loose, or corroded.
• Helps prevent intermittent power/grounding issues and reduces risk of electrical arcing at the chassis connection.
• Works wherever a dedicated grounding point is required on the cabinet or frame.

• Single ground screw

• Always disconnect power (unplug or switch off circuit breaker) before servicing electrical connections.
• Verify chassis is de-energized and wear appropriate PPE when working on electrical parts.
• Use the correct driver bit and size to avoid stripping the screw; tighten securely but avoid over-torquing.
• Replace corroded grounding hardware and ensure the ground wire/strap has clean metal-to-metal contact.

This socket assembly provides a secure electrical connection for the appliance's component, restoring reliable power transfer where a worn or damaged socket prevents operation. It's a direct-fit replacement designed to reinstall using the original wiring and mounting points. What it does:

• Re-establishes a solid electrical connection between the appliance wiring and the component to restore functionality
• Commonly replaces sockets that are cracked, corroded, burned, or loose and cause intermittent operation
• Helps stop arcing, overheating at the terminal, or loss of power to the connected component
• Matches OEM fit and mounting to maintain safe, stable contact under normal use

• One socket assembly

• Disconnect power (unplug or switch off circuit breaker) before starting any repair
• Note wire colors/locations or take a photo before removing old socket to ensure correct reconnection
• Use appropriate tools; avoid crimping or pinching wires—replace any damaged wiring or terminals
• If corrosion, heat damage, or melting is present on surrounding components, inspect and replace affected parts.