Gtd550hgd4ww Parts

A genuine replacement mounting screw used to secure appliance panels and trim pieces. Replaces a single worn, stripped or missing fastener to restore proper fit and prevent rattling or loose components. What it does:

• Secures panels, brackets or trim to the appliance frame
• Stops rattling or vibration caused by loose or missing screws
• Restores proper alignment when existing fasteners are stripped or damaged
• Matches OEM fit and thread for reliable fastening

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until secure to prevent thread damage
• Keep removed hardware organized to ensure correct reassembly

These duct trap slides replace the moving rails that let the dryer's duct trap assembly open and close smoothly, helping restore proper vent access and reduce rattling or binding. Designed to match OEM fit and function. What it does:

• Guides the dryer duct trap so the trap door opens and closes smoothly
• Helps prevent the trap from sticking, misaligning, or making noise
• Restores proper vent access for cleaning and maintenance
• Works with the duct trap assembly to maintain a secure fit

• Recommended for experienced DIYers; unplug appliance and move away from the wall before beginning
• Remove front access panel or lint trap assembly to reach trap slides
• Inspect surrounding clips and fasteners; replace any damaged hardware to ensure secure fit

The Motor and Blower Assembly is an OEM part for GE dryers. This part creates the necessary airflow to circulate hot air and remove moisture from your laundry. 

A bad motor and blower assembly can occur due to wear and tear, mechanical failure, or electrical issues. If you notice symptoms such as the drum not spinning, reduced airflow, unusual noises during operation, or the dryer not heating properly, it may be time to replace this assembly.

Symptoms of a bad motor and blower assembly include:

• Drum not spinning
• Reduced airflow
• Unusual noises during operation
• Dryer not heating properly

Restore your GE dryer by replacing the faulty motor and blower assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Replacement screw that secures appliance panels and internal components, restoring proper fit and helping prevent rattling or misalignment. Use this fastener when original screws are stripped, missing, or damaged to keep parts stable and secure. What it does:

• Secures panels, trim pieces, brackets and other components to maintain proper alignment and fit.
• Replaces stripped, corroded, or missing screws that can cause rattling, vibration, or loose parts.
• Restores stable mounting for service panels and access covers to reduce noise and movement during operation.
• Simple hardware replacement — helps prevent secondary damage caused by loose or shifted components.

• Disconnect power or gas (when applicable) before servicing to avoid shock or injury.
• Use the correct screwdriver or bit to avoid stripping the head; turn until snug—do not overtighten.
• Keep track of small parts and wear eye protection when working in tight spaces.
• If threads are damaged, replace with the correct OEM screw rather than forcing reuse.

8-18 hi/lo 5/8

Size: 8-32 t. Includes 12 screws.

The Trap Duct Assembly is an OEM replacement part for GE dryers. This assembly provides the ducting and pathway to direct lint from the dryer drum to the lint trap. It plays a crucial role in efficiently removing lint and preventing blockages. 

Causes of a bad trap duct assembly can include cracks or breaks in the ducting material, crushing or collapsing of the duct, or loose connections that allow lint to bypass the trap. 

Symptoms of a bad trap duct assembly include:

• Increased drying times as lint is not properly exhausted 
• Lint building up inside the dryer instead of collecting in the trap
• Vibrating or rattling noises from loose or damaged ducting
• Reduced airflow leading to inefficient drying performance

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models. Replace yours today for optimal lint removal and dryer operation.

This harness high-limit assembly connects the oven/dryer high-limit thermostat to the control system to help protect against overheating. It replaces a damaged or worn high-limit wiring harness to restore proper thermal cutoff signaling. What it does:

• Routes electrical connections between the high-limit thermostat/thermal cutoff and the appliance control
• Allows the high-limit device to open the circuit when temperatures exceed safe limits
• Common symptom: appliance fails to heat or repeatedly trips a thermal cutoff
• Common symptom: visible damaged/frayed wires or loose connector fit at the high-limit

• One high-limit harness assembly as shown

• Disconnect all power (unplug or shut off breaker) before starting service
• Use basic hand tools; ensure connectors are fully seated and insulated

This 120V replacement power cord restores household current to gas ranges and ovens that use a corded connection for clocks, lights, igniters and controls. It provides a straightforward way to replace a damaged or worn cord and regain safe power to the appliance. What it does

• Supplies 120-volt power from the wall outlet to the range/oven's control system, clock and lights.
• Restores ignition and control functions when a frayed or broken cord prevents the appliance from receiving power.
• Replaces cords that show signs of burning, cracking, loose connections, or exposed wiring.
• Reduces risk of electrical faults caused by damaged insulation or terminals.

• One 120V power cord

• Disconnect power at the circuit breaker or unplug the appliance before starting; ensure the appliance is de-energized.
• Route and secure the cord to avoid pinching; tighten terminal screws to manufacturer torque recommendations.

This exhaust duct is a replacement vent connector that routes appliance exhaust air safely away from the unit, helping restore proper airflow and reduce heat buildup. Use it to replace a damaged or missing duct for safer venting. What it does:

• Channels exhaust air from the appliance to the household vent system
• Restores proper airflow when the original duct is cracked, bent, or disconnected
• Helps reduce heat and moisture buildup around the appliance
• Supports safe operation by maintaining a clear exhaust path

• Disconnect power to the appliance before beginning any service
• Confirm orientation and fit with the appliance vent opening before final installation
• Use appropriate clamps or fasteners and ensure a secure, airtight connection
• If venting to the outdoors, verify the exterior vent is clear of obstructions after installation

This valve and burner assembly controls gas flow to a cooktop/oven burner so your appliance ignites and holds a steady flame. Replaces a worn or failed valve/burner to restore safe, consistent heating. What it does:

• Regulates gas flow to the burner for ignition and steady flame control.
• Commonly used when a burner won't light, has no flame, or flame is weak/uneven.
• Replaces a cracked, leaking, or malfunctioning valve or damaged burner component.
• Works as a direct replacement part where this assembly is specified.

• Shut off the gas supply and unplug the appliance before servicing.
• Installation may require removing the cooktop/oven top and disconnecting gas and electrical connections.
• After installation, check all gas connections for leaks and verify proper operation before regular use.

This replacement screw fastens appliance panels, brackets, and trim. The 8-18 thread with 1-3/4-inch length provides reliable bite in sheet metal or plastic, restoring a secure fit when an original fastener is missing or damaged.

• Secures panels, brackets, and trim to the cabinet or frame
• Replaces lost, stripped, or corroded fasteners
• Helps address loose or rattling panels, minor gaps, or misalignment
• Appropriate for sheet-metal applications that require ~1-3/4-inch reach

• Disconnect power before servicing; wear cut-resistant gloves
• Support the panel or part being fastened and use the correct driver for the screw head
• Start threads by hand to avoid cross-threading; do not overtighten into plastic or thin metal
• Repair or replace the anchor before installing

This knob assembly replaces a worn, broken, or missing control knob so you can reliably select heat or settings on your range or cooktop. It restores safe, accurate user control and a finished appearance. What it does:

• Fits onto the control shaft to allow turning the switch for burner/oven settings
• Restores tactile grip and clear position selection when the original had stripped or cracked
• Helps stop slipping or intermittently losing contact between the user and the control
• Suitable for use where the original knob assembly is damaged or missing

• Disconnect power (or turn off gas appliance supply) before servicing controls.
• Push the knob straight onto the control shaft until fully seated; pull straight off to remove.
• Inspect the switch/shaft for damage; replace the switch or shaft if the knob does not seat securely.

This variable buzzer provides audible alerts for cycle end, timers, and error notifications on compatible GE appliances. It restores clear, adjustable-tone beeps that signal user and diagnostic events. What it does

• Produces variable-tone audible signals for timers, end-of-cycle notices, and alerts
• Replaces a failed, intermittent, or silent buzzer to restore audible feedback
• Works with the appliance control board to emit distinct tones for different events
• Helps identify audible error codes when troubleshooting

• One buzzer assembly

• Disconnect power to the appliance before beginning any service
• Access typically requires removing the control panel or console; handle panels and clips gently
• Match the connector and mounting location to the original part before installing

The Valve and Burner Assembly is an OEM part for GE dryers. As an integrated sub-assembly, it includes gas control valves, pilot components, and the main burner.  

Working together as a system, this assembly regulates gas flow to the heating elements. It provides consistent thermal output throughout drying cycles under control board direction.

Causes of failure can include normal wear over extended use. Mineral or debris buildup may also interfere with proper functioning over time. 

Symptoms of a faulty assembly comprise:  

• Inability to properly ignite or maintain burner flames
• Fluctuations in heating element output impacting dry times  
• Potential gas leaks or unsafe unburned gas emissions
• Issues fully completing designated drying cycles

This genuine GE replacement assembly ensures all gas components function reliably once more. Compatible with some Hotpoint, RCA, and select Kenmore models too, safety and performance are restored through precise thermal regulation.