Gts18gbemrww Parts

This rear mobility wheel replaces a worn or broken wheel on the back of your refrigerator, restoring smooth rolling movement so you can pull the unit out safely for cleaning, servicing, or leveling without dragging or floor damage.

• Mounts to the rear base/roller bracket to support and roll the refrigerator for positioning or service
• Replace if the wheel is cracked, missing, flat-spotted, or seized
• Common symptoms: unit is hard to move, scrapes the floor, sits unevenly, or makes grinding noises when moved
• Helps maintain proper cabinet support during movement

• Disconnect power and turn off the water supply before servicing
• Protect flooring and use a helper—appliances are heavy and can tip
• Access the rear base area; remove the old wheel and install the new wheel using the existing hardware
• After re-positioning, re-level the refrigerator per the owner's manual

This plug button thimble is a small control-panel insert that secures and centers push buttons, helping keep button caps in place and reducing moisture or debris entry. It restores proper button feel and alignment on the control panel. What it does:

• Centers and retains push-button caps so buttons press and release correctly
• Helps prevent dirt and spills from entering the control-panel opening
• Replaces a cracked, worn, or missing thimble that lets buttons wobble or fall inward
• Compatible with the original push-button assembly to restore original fit and function

• Simple, non-electrical replacement—power to the appliance is not required for this exterior part, but unplugging is recommended if removing trim near live components
• Remove the button cap first, press the old thimble out from the front or back as applicable, then press the new thimble into the panel opening until fully seated
• Inspect button cap and surrounding trim for damage; replace any damaged mating parts for best fit
• Use care to avoid scratching the control panel; keep small parts away from children

Specs: 8-32 ca hxw 1/2

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This right-hand gusset is a small structural bracket that supports and stabilizes a refrigerator door or drawer assembly, restoring proper alignment and smooth operation when the original bracket is cracked or worn. What it does:

• Reinforces the door/drawer frame to prevent sagging or misalignment
• Restores proper hinge alignment for smooth opening and closing
• Helps eliminate rubbing, catching, or uneven gaps around the door/drawer
• Commonly replaced when visible cracks, breaks, or loose mounting points are present

• Installation requires basic hand tools; remove power to appliance and open door/drawer as needed for access
• Retain and reuse existing fasteners unless replacements are specified by the manufacturer
• Inspect adjacent hinges and mounting points for wear; replace if damaged

This control knob fits onto the control shaft to let you adjust settings on your refrigerator. Replacing a cracked or missing knob restores smooth adjustments and keeps the control easy to use.

• Attaches to the control shaft to select temperature/settings
• Common fix for a knob that is cracked, stripped, loose, or missing
• Helps when the knob spins without engaging the shaft or falls off
• Restores proper feel for everyday adjustments

• Unplug the refrigerator before working near the control area
• Pull the old knob straight off—avoid prying on the panel
• Align the flat/D-shaped opening with the shaft and press firmly until seated
• If the knob won't seat, inspect the control shaft for damage before forcing

This machine screw secures refrigerator brackets, panels, and hardware. Its 12-24 thread and integrated hex-washer head provide a snug, vibration-resistant hold to keep components properly mounted and aligned.

• Fastens mounting brackets, covers, and other hardware to the refrigerator cabinet or frame
• Replaces a missing, stripped, or corroded screw to restore a secure attachment
• Helps reduce rattles, vibration, or shifting caused by loose fasteners
• Supports proper fit and alignment of serviced components

• Disconnect power before servicing; wear cut-resistant gloves
• Match thread and length to the original; do not force mismatched hardware
• Start by hand to avoid cross-threading; tighten snugly without overtightening, especially into plastic
• Retain and transfer any spacers or clips from the original hardware

This top hinge and pin assembly secures the refrigerator door to the cabinet and provides a durable pivot point for smooth opening and closing. Replacing a worn hinge restores proper door alignment and sealing. What it does:

• Supports the top of the door and transfers weight to the cabinet frame
• Provides the pivot pin for consistent, smooth door movement
• Helps maintain proper door alignment and a tight seal to prevent cool-air loss
• Can resolve symptoms such as door sagging, uneven gaps, rubbing, or noisy hinge operation

• Disconnect power and remove food from door area before starting repair
• Support the door to prevent dropping or damage during hinge removal
• Keep track of mounting hardware and orientation for correct reinstallation; follow the appliance manufacturer's service instructions
• Do not force or overtighten fasteners; check door alignment and operation after installation