Gts18gthglrbb Parts

The Ice Bucket is an OEM part for GE refrigerators. It is a component that stores ice from the icemaker in the freezer compartment. The ice bucket allows for convenient access to ice on demand, fitting seamlessly within the refrigerator design.

Symptoms of a bad ice bucket include:

• Cracks or damage to the plastic material
• Inability to easily remove or insert the bucket  
• Ice falling out of the bucket improperly
• Missing parts like the handle

Note: This is just the ice bucket. It does not include other ice maker components.

Replace your worn ice bucket before further issues arise like ice spilling in the freezer. This OEM GE part restores your refrigerator’s storage and access to ice. It is also compatible with Hotpoint, RCA, and Kenmore refrigerators.
 

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This rear access cover replaces the panel that protects and conceals components at the back of the refrigerator cabinet. It restores the finished appearance and helps keep dust and debris away from electrical and service areas. What it does:

• Covers and shields rear-mounted components and wiring from dust, dirt, and accidental contact
• Helps maintain a finished exterior at the rear of the cabinet after service or component replacement
• Reduces the chance of loose debris or small tools contacting internal parts during operation
• Restores proper access panel fit for service technicians and future maintenance

• One rear access cover panel

• Disconnect power to the appliance before attempting any service
• Typically secures with screws; keep original fasteners or use OEM-specified hardware
• Move the appliance away from the wall for safe access and stable working space
• Replace any damaged clips or screws to ensure a secure fit and proper protection

This genuine fastener secures appliance components such as panels and brackets. Replacing a missing or stripped screw restores proper fit and helps reduce vibration or rattling. Features 12-24 threads and an approximate 0.785-inch length. What it does:

• Fastens panels, brackets, covers, and other hardware points in the appliance
• Helps maintain proper alignment and a tight fit of components
• Replaces damaged, stripped, or missing hardware
• Common symptoms include loose or rattling parts and hardware that won't tighten

• One screw

• Disconnect power before servicing; shut off water supply if working near water components
• Start the screw by hand to avoid cross-threading; replace one-for-one in the original location
• Use the correct driver bit for the head style; tighten snugly without overtightening into plastic or thin metal

This control housing is the outer console frame that holds the oven/range control board and user interface, restoring a clean, secure mounting for switches, buttons and the display. It helps keep controls aligned and protected for reliable operation. What it does:

• Secures the electronic control board and control panel components in the appliance console
• Keeps buttons, knobs and display window properly aligned and protected from debris
• Helps prevent intermittent button or display contact caused by a loose or cracked housing
• Addresses symptoms like loose or rattling controls, misaligned buttons, or visible cracks in the console

• Disconnect power (unplug appliance or shut off breaker) before starting any repair
• Remove screws and any trim pieces to access the control housing; handle plastic parts gently to avoid cracking
• Support the control board and wiring when removing the housing to avoid strain on connectors

The Compressor is an OEM component specifically designed for GE top-mounted and bottom-mounted refrigerator freezers. Responsible for circulating refrigerant, its robust motor compressively moves gas to chill interiors reliably. Permanent lubrication withstands constant operation.

Symptoms of a faulty compressor commonly involve cycling off too frequently or inefficient temperature regulation. Loss of pressure from degradation risks expensive repairs necessitating replacement. 

Causes of a bad compressor relate to typical wear reducing circulation. Over-activation exposes motor windings to damage requiring timely change.

Causes of a bad compressor can involve:

• Failure to maintain set temperatures 
• Frost buildup impairing performance
• Vibrations transferring to cabinetry

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire refrigerators. Replace to retain steady refrigeration preserving freshness for dependable operation long-term.
 

A replacement freezer door panel that restores the exterior finish and sealing surface on compatible refrigerators. Helps maintain proper cold retention and gives a clean, uniform appearance to the freezer compartment. What it does:

• Replaces a cracked, dented, or discolored freezer door panel to restore look and function
• Provides the outer surface that mates to the freezer door assembly and trim
• Helps maintain an even seal and reduces cold air loss when the door closes
• Useful when a door panel is damaged by impact or cosmetic wear

• One white freezer door panel

• Basic door trim removal and reassembly required; retain all fasteners and clips for reuse if undamaged
• Disconnect power to the appliance before starting work to avoid electrical hazards
• Handle panel carefully to avoid scratching the finish; use protective gloves and a soft surface
• If the door contains internal components (liners, insulation, hinges), reattach per manufacturer instructions

This refrigerator door stop cushions and limits the door swing to prevent over-travel and protect the cabinet and hinge. Durable plastic design restores proper door alignment and reduces slamming for a quieter, safer fridge. What it does

• Replaces a worn or broken door stop to stop the door from swinging too far.
• Helps prevent damage to the cabinet edge and hinge by absorbing impact.
• Reduces door noise and improves door alignment for a consistent seal.
• Commonly used where the original plastic stop is cracked, missing, or worn.

• One refrigerator door stop (white), as shown.

• Basic hand tools typically required; disconnect power only if working near electrical components.
• Keep original fasteners; replace only with like hardware if specified.
• Inspect surrounding hinge and mounting area for wear and replace if necessary.

This top hinge and pin assembly secures and guides a refrigerator door so it opens and closes smoothly. Replacing a worn hinge restores proper door alignment and helps the door seal correctly. What it does

• Supports the top of the refrigerator door and provides the pivot point for opening and closing
• Replaces a bent, worn, or broken hinge that can cause a sagging or misaligned door
• Helps stop rubbing, squeaking, or noisy door movement caused by a damaged hinge
• Restores correct door positioning to improve gasket sealing and cold retention

• Disconnect power and remove all items from the door before starting work.
• Support the door (have a second person if needed) while removing and installing the hinge to prevent injury or damage.
• Use basic hand tools; follow the refrigerator manufacturer's service instructions for proper alignment and torque.

This lamp socket is the light bulb receptacle that secures and supplies power to an appliance interior lamp, restoring reliable electrical contact and a stable bulb connection for safe, visible lighting. What it does

• Holds the light bulb and provides the electrical contacts needed for the lamp to power on.
• Replaces cracked, melted, or loose sockets that can cause poor contact or intermittent lighting.
• Helps stop symptoms like a bulb that flickers, won't stay seated, or won't light despite a good bulb.
• Restores a secure mounting so the bulb stays in place and maintains consistent illumination.

• One lamp socket.

• Disconnect power to the appliance before starting any repair to avoid shock.
• Use the correct replacement bulb type and wattage for your appliance;
• Inspect wiring and connectors for damage; replace wiring or connectors if they are burnt or corroded.

The Door Gasket is an OEM part for GE refrigerators. This gasket forms a seal around the refrigerator door, ensuring that the cold air remains inside and warm air stays out. By maintaining a proper seal, the door gasket helps in preserving the freshness of the food and contributes to the energy efficiency of the appliance.

Causes of a bad door gasket can include wear and tear over time, exposure to temperature fluctuations, or damage from cleaning chemicals. Physical damage such as cuts or tears can also compromise the gasket's effectiveness. Replacing a faulty door gasket is essential to maintain the refrigerator's performance and energy efficiency.

Symptoms of a bad door gasket include:

• Warm spots inside the refrigerator
• Excessive frost buildup
• The door not closing properly or staying shut
• Higher than usual energy bills due to increased cooling effort

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Gasket Door is an OEM replacement part for GE refrigerators. It is a crucial component responsible for creating an airtight seal between the refrigerator door and the cabinet. This gasket helps maintain the desired temperature inside the refrigerator, prevents air leaks, and enhances energy efficiency.  The gasket measures approximately 26.5 in. x 44 in.

Symptoms of a bad Gasket Door include:

• Difficulty closing the refrigerator door properly
• Air leaks causing the refrigerator to work harder to maintain the set temperature
• Condensation buildup on the inside of the refrigerator
• Increased energy consumption due to the refrigerator's inability to maintain optimal cooling

Causes of a bad gasket can include normal wear and tear over time, exposure to extreme temperatures, or damage from mishandling or improper cleaning. If the gasket becomes cracked, brittle, or loses its pliability, it can compromise the airtight seal, leading to inefficient cooling and potential food spoilage.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.