Gts18ibrwrcc Parts

This white door corner cap covers and protects the exposed corner of a refrigerator/freezer door, restoring a finished look and preventing further wear. It's a simple cosmetic replacement that keeps the door edge neat and protected. What it does:

• Covers damaged, cracked, or missing door corner for improved appearance
• Protects the door edge from chips, dings, and contact wear
• Hides exposed hardware or rough edges that can catch on clothing
• Helps maintain a consistent door seal area by replacing worn corner trim

• Snap-on replacement; may require gently prying off the old cap with a flat tool
• No wiring or electrical disconnect typically required, but unplug appliance if working near electrical components
• Inspect surrounding trim and hinge for damage while replacing the cap
• If cap does not seat easily, check for obstructions or broken mounting tabs before forcing

This white corner cap is a small plastic cover that snaps onto a refrigerator door corner to protect the hinge area, conceal fasteners, and restore a finished appearance. Simple replacement for visible damage or missing trim. What it does:

• Covers and protects the door corner and hinge area from dirt and damage
• Hides exposed screws and hardware for a cleaner look
• Prevents sharp edges or gaps that can catch clothing or fingers
• Commonly replaced when cracked, broken, or missing after impact or wear

• Snaps into place
• No wiring; no disassembly beyond removing the damaged cap in most installs
• Disconnect power only if you must remove nearby electrical components; otherwise work with the appliance idle
• Handle plastic parts carefully to avoid cracking; do not force into place

A replacement small handle assembly that restores a secure, easy-to-grip door handle for your appliance. Fits the OEM small-handle location and replaces cracked, broken or missing handles so the door opens and closes normally. What it does:

• Replaces a damaged or missing small door handle assembly
• Restores a secure grip for opening and closing the door
• Eliminates looseness, cracking, or split plastic at the handle mounting
• Helps prevent further damage to the door trim by providing proper support

• High-level replacement — basic hand tools typically required
• Follow OEM instructions and hardware sequence when removing trim or panels
• Do not overtighten fasteners; ensure proper alignment before final torque

This push-button plug insulates and seals a control panel push-button, helping keep the button stable and protecting the switch from moisture and debris. Fits where a small plastic button bushing or insulator is needed on the control panel. What it does:

• Provides an insulating bushing for a control panel push-button or switch
• Helps hold the button aligned and reduces wobble or uneven operation
• Shields the switch contacts from moisture and dirt that can cause intermittent operation
• Commonly replaced when the button is loose, damaged, cracked, or missing

• Disconnect power to the appliance before removing the control panel or working near electrical components
• Remove the control panel or trim; use appropriate tools to avoid cracking surrounding plastic
• Install the plug gently; do not force or use excessive heat

This evaporator coil circulates refrigerant inside the freezer compartment to absorb heat and keep internal temperatures cold. Replacing a damaged evaporator restores proper cold transfer for reliable cooling performance. What it does:

• Absorbs heat from the freezer compartment by circulating refrigerant through the coil
• Helps maintain proper freezer and refrigerator temperatures when functioning correctly
• Common symptom: excessive frost or ice buildup on the evaporator fins
• Common symptom: warm freezer or refrigerator temps and longer run cycles
• Common symptom: compressor runs constantly or cooling becomes inconsistent

• Disconnect power to the appliance before any service to avoid electrical shock
• Refrigerant system access or refrigerant evacuation may be required; have a certified HVAC/refrigeration technician perform refrigerant work
• May require removal of interior panels, shelving, and insulation for access; follow factory service instructions
• Handle the coil carefully to avoid bending fins or damaging tubing

Replacement cantilever half glass shelf that restores a flat, easy-to-clean storage surface inside the refrigerator. Provides a stable platform for containers and replaces a cracked, chipped, or missing shelf. What it does:

• Provides a flat, sturdy surface for storing food and containers on refrigerator shelving rails.
• Slides into existing cantilever shelf supports for quick replacement.
• Restores full usable shelf space after a broken or missing glass shelf.
• Helps contain small spills on a smooth, easy-to-clean surface.

• Remove all contents from the area before installing and place on a padded surface to avoid damage.
• Handle with care and wear cut-resistant gloves; glass edges may be sharp if broken.
• Slide the shelf into the existing side supports until fully seated; do not force if misaligned.
• Dispose of any broken glass safely and check that supporting rails or brackets are intact and secure.

A full-width cantilever shelf that restores stable, level storage inside the refrigerator. Replaces a bent or broken shelf to keep food organized and prevent items from sliding or falling. What it does:

• Supports refrigerator items on a full-width shelf, keeping contents level and secure
• Replaces damaged or bent cantilever shelving hardware that causes shelves to tilt or collapse
• Restores proper shelf alignment for even storage and safer handling
• Works with existing shelf tracks/brackets so the shelf locks into place

• Remove food and glass shelves from the area before installing
• Slide or snap the cantilever ends into the existing shelf tracks
• No special tools typically required; handle glass or edged surfaces with care

This is a push-on spring knob used to operate a range or cooktop control shaft, restoring a secure grip and reliable control feel. Fits common GE control stems to replace a worn, cracked, or missing knob. What it does

• Replaces a damaged or missing control knob so you can safely set burner or oven heat levels.
• Provides a firm, spring-loaded fit to help the knob stay centered and prevent slipping.
• Restores tactile feedback for precise temperature or setting selection.
• Helps eliminate spinning or play caused by worn original knobs.

• One spring knob

• Push the knob straight onto the control shaft until it fully seats; no tools typically required.
• Disconnect power or gas supply and follow appliance safety instructions before servicing nearby components.
• If the control shaft is damaged or the knob does not secure properly, stop and inspect the control assembly; do not force the knob.