Gtw465asn Parts

This is a self-tapping Plastite screw with a hex washer head and a 5/8 in. length that secures plastic and thin-sheet components. Use it to replace missing or damaged mounting screws for a snug, reliable fit. What it does:

• Forms threads in plastic (Plastite style) to fasten panels, brackets, and trims.
• Hex washer head provides a larger bearing surface for better holding power.
• Replaces stripped, corroded, or missing screws to stop loose or rattling parts.
• Works where a self-tapping screw is required for secure mounting without a separate nut.

• Use the correct hex/nut driver and a properly fitting bit to avoid stripping the head.
• Hand-start the screw and drive straight to prevent cross-threading; stop when snug—do not overtighten into plastic.
• Unplug the appliance or shut off power before disassembling or working near electrical components.
• Replace with the same screw type and size to maintain proper fit and function.

LID BUSHING LEFT

LID BUSHING RIGHT

This belt protector is a replacement cover that shields the dryer drive belt and nearby components from damage, helping maintain smooth drum rotation and prevent premature belt wear. What it does:

• Covers and protects the dryer drive belt from contact with the cabinet and foreign objects
• Helps prevent belt fraying and rubbing that can cause noise or reduced performance
• Keeps lint and debris away from the belt path to reduce overheating risk
• Supports proper belt routing for consistent drum movement

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the dryer top or rear panel—use basic hand tools
• Inspect the drive belt and idler for wear while the protector is off; replace if damaged

This left-side wireform hinge secures and guides a top lid, restoring smooth opening and stable closure for affected appliances. It replaces a bent or worn hinge to reduce sagging, uneven gaps, and noisy or sticky lid movement. What it does

• Supports the lid on the left side and keeps it aligned during open/close cycles
• Restores smooth pivoting when the original hinge is bent, stretched, or broken
• Helps eliminate lid sag, uneven gaps, or rubbing against the cabinet
• Reduces rattling or binding caused by a damaged wireform hinge

• Disconnect power to the appliance before starting repairs to avoid injury
• Basic hand tools typically required; remove any trim or screws securing the old hinge
• Align the new hinge carefully and test the lid travel before fully tightening fasteners

This 6-32 machine flat-head hinge lid screw secures the lid hinge on compatible GE appliances, restoring proper lid alignment and smooth opening and closing. A simple replacement that addresses loose or rattling lids. What it does

• Fastens the lid hinge to the cabinet or hinge assembly
• Keeps the lid aligned for smooth opening and closing
• Helps stop lid wobble, rattling or uneven seating
• Replaces worn, stripped, or missing hinge screws

• One 6-32 machine flat-head hinge screw

• Turn power off and unplug appliance before servicing
• Use the correct-size screwdriver or nut driver to avoid stripping the head
• Thread screw in by hand to start, then tighten snugly—do not over-torque
• Check hinge alignment and lid operation after installation

A general-purpose appliance grease used to lubricate moving parts and reduce friction for smoother operation. Helps protect metal components from wear and keeps mechanisms operating quietly and reliably. What it does:

• Lubricates gears, hinges, rollers and other moving parts to reduce friction and wear
• Helps stop or reduce squeaks, grinding noises and stiff or sticking movement
• Aids smooth operation of controls and mechanical linkages
• Provides light protection against corrosion on contact surfaces

• Disconnect power before servicing the appliance to avoid shock or injury
• Clean and dry the area to be lubricated; apply a light, even amount where parts make contact
• Avoid getting grease on electrical components, heating elements, or surfaces that require friction
• Wipe away excess lubricant and test operation before returning the appliance to regular use

This control board shield protects the appliance's electronic control board from debris, heat, and accidental contact to help maintain reliable operation. It's a direct-fit replacement designed to restore proper protection for the control electronics. What it does:

• Covers and shields the electronic control board from dust, moisture splash, and physical contact
• Helps reduce risk of short circuits caused by loose debris or small objects
• Preserves board components from incidental heat exposure and wear
• Commonly replaced when the old shield is cracked, broken, or missing

• One control board shield

• Disconnect power before servicing to avoid shock or damage to electronics
• Handle shield and control board carefully to avoid bending tabs or damaging connectors
• Reuse original fasteners if undamaged; replace any broken clips or screws

This hex-head machine screw secures appliance panels and internal components where a 5/16-24 x 1 inch fastener is required. Durable replacement for stripped or missing screws to restore safe assembly and reduce vibration. What it does:

• Fastens panels, brackets, and assemblies with a 5/16-24 machine thread.
• Replaces worn, stripped, or missing screws that can cause rattling or loose parts.
• Provides a secure, threaded connection for metal-to-metal or tapped-hole repairs.
• Matches OEM thread and length to maintain proper fit and alignment.

• Disconnect power and unplug the appliance before servicing.
• Use the correct hex driver or socket to avoid rounding the head.
• Thread into matching 5/16-24 tapped holes; do not force into incorrect thread sizes.
• Tighten snugly but avoid over-torquing to prevent stripping the tapped hole.

This decorative badge is the exterior emblem that mounts to the appliance cabinet or door to restore factory appearance and identification. It replaces a missing, faded, cracked, or detached emblem for a clean, finished look. What it does:

• Replaces a worn, damaged, or missing appliance emblem
• Restores original exterior appearance and branding visual
• Prevents loose badges from catching on clothing or edges
• Designed to match OEM fit and finish for a seamless look

• Typically installs on the appliance front using clips or adhesive
• Clean and dry the mounting surface before installing to ensure proper adhesion or fit
• Avoid excessive force when seating the badge to prevent damaging trim or clips
• Wear gloves to protect finish and follow general appliance-safety practices

The Ground Screw is an OEM part for GE dryers. It ensures proper grounding and electrical safety for your dryer. This screw securely connects the ground wire to the dryer chassis, providing a path for electrical current to safely discharge in the event of a fault or power surge.

A bad Ground Screw can lead to electrical issues and potential safety hazards. Causes of a bad Ground Screw can include corrosion, loose connections, or damage due to accidental mishandling or improper installation.

Symptoms of a bad Ground Screw include:

• Intermittent dryer operation
• Visible signs of damage or deterioration on the screw or ground wire
• Tripped circuit breakers or blown fuses

Replace your faulty or damaged Ground Screw with this genuine OEM GE part to ensure proper grounding and electrical safety for your dryer. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.