Gtw46oasj6ww Parts

This dual harness connector is a direct-fit replacement plug that secures two wire harnesses to restore a reliable electrical connection. It helps eliminate loose or intermittent wiring connections for affected appliance circuits. What it does:

• Provides a secure, snap-fit connection between two wire harnesses
• Restores continuity to circuits that show intermittent power, no power, or erratic operation
• Holds wiring in proper alignment to prevent accidental disconnection
• Used where a dual-wire plug mates to a control, switch, or component

• One dual harness connector

• Always disconnect power to the appliance before servicing
• Inspect wire ends and terminals for damage; replace or repair wiring if needed
• Use appropriate tools to seat the connector fully; do not force or bend terminals

This left backsplash support is the metal bracket that secures the range/oven backsplash and helps keep the control panel and rear trim stable. It restores proper alignment and reduces movement of the upper back assembly. What it does

• Provides structural support for the left side of the backsplash and control panel area
• Keeps the backsplash and rear trim aligned to prevent wobble or sagging
• Helps stop vibration or rattling coming from the upper rear of the appliance
• Replaces a bent, broken, or missing left support bracket

• One left backsplash support bracket

• Disconnect power to the appliance before starting any repair
• You may need to remove the range top, control panel, or rear access panel to access mounting screws
• Use basic hand tools; keep fasteners for reuse and note their original locations
• If you see additional damaged or missing fasteners or trim, replace them as needed for a secure fit

This control panel is the user interface assembly for the 460/465 series, restoring visible controls and button response so you can operate the appliance safely and reliably. Fits into the front console to replace a cracked or non-responsive panel. What it does:

• Houses the touchpads/buttons and display area used to select cycles and settings
• Replaces worn, cracked, or unresponsive control surfaces to restore normal operation
• Helps resolve issues like unresponsive buttons, missing labels, or cosmetic damage
• Works with the console electronics to transmit user inputs for cycle selection

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Installation typically requires removing the console trim; handle the panel carefully to avoid scratching or damaging the display
• If the control panel is attached to electronic modules, avoid contact with circuit boards and static-sensitive components
• Verify function after reassembly; if problems persist, check related electronic modules or wiring

This 8-18 x 5/8 screw fastens appliance panels and components for a secure, vibration-resistant fit. Stainless construction resists corrosion for durable long-term holding in interior appliance assemblies. What it does:

• Secures control panels, brackets, trim, and other sheet-metal parts
• Designed for 8-18 threads to match mating threaded inserts or nuts
• Square-recess (TSQ) head accepts matching driver for positive engagement
• Replaces missing, stripped, or corroded mounting screws that cause rattle or loosened parts

• One 8-18 x 5/8 screw

• Use the correct square-head driver to avoid cam-out and head damage
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow all safety precautions before working on the appliance
• Keep spare screws on hand when removing panels to prevent loss

This rear control panel replaces the damaged or worn console panel that mounts behind the range/oven controls, restoring a secure mounting surface and proper protection for control wiring and components. Fits styles that use a rear-mounted control console. What it does

• Provides the mounting surface and enclosure for control switches, touchpads, and indicator lights.
• Protects internal wiring and control components from heat, debris, and accidental contact.
• Restores proper alignment for knobs, buttons, and display modules when the original panel is bent, cracked, or missing.
• Helps eliminate loose or vibrating controls and can resolve cosmetic damage to the console area.

• One rear control panel.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Removal typically requires taking off back access panels and disconnecting any attached control cables or grounding screws; keep hardware for reinstallation.
• Handle edges and sheet-metal openings with care; wear gloves and eye protection to avoid cuts.
• Note wiring locations and take photos before disconnecting for correct reassembly.

A molded metal support bracket that holds the right side of the oven/range backsplash assembly in place, restoring secure alignment and preventing sagging or gaps behind the control area. What it does

• Secures the right side of the backsplash or backguard assembly to the range frame.
• Helps prevent the backsplash from sagging, shifting, or coming loose when using controls or cleaning.
• Can stop visible gaps that allow debris or steam behind the control panel.
• Works with the existing backsplash components and mounting hardware to maintain proper fit.

• One right backsplash support bracket.

• Disconnect power to the appliance before attempting any service.
• Access may require removing the cooktop, control panel, or top trim.
• Use appropriate hand tools; keep track of fasteners and any clips removed.
• If the backsplash or adjacent parts are damaged, inspect related fasteners and supports for wear before reassembly.

This decorative badge is the exterior emblem that mounts to the appliance cabinet or door to restore factory appearance and identification. It replaces a missing, faded, cracked, or detached emblem for a clean, finished look. What it does:

• Replaces a worn, damaged, or missing appliance emblem
• Restores original exterior appearance and branding visual
• Prevents loose badges from catching on clothing or edges
• Designed to match OEM fit and finish for a seamless look

• Typically installs on the appliance front using clips or adhesive
• Clean and dry the mounting surface before installing to ensure proper adhesion or fit
• Avoid excessive force when seating the badge to prevent damaging trim or clips
• Wear gloves to protect finish and follow general appliance-safety practices