Gtw725bsnows Parts

This replacement bleach cup holds and releases liquid bleach into the washer during the wash cycle, helping the machine dispense bleach safely and evenly. It restores proper bleach delivery when the original cup is cracked or worn. What it does:

• Holds liquid bleach and channels it into the wash tub during the dispense portion of the cycle
• Helps prevent bleach from pooling on clothing by directing flow into the washer
• Commonly replaced when cracked, split, or otherwise leaking
• Works with the washer's existing dispenser assembly to activate bleach delivery

• One bleach cup

• Disconnect power and water supply before beginning any repair
• Remove the dispenser drawer or top panel per the washer's service instructions to access the cup
• Inspect surrounding dispenser parts for wear; replace damaged components as needed

This tub cover is the outer panel that protects and secures the dryer drum assembly, helping keep laundry contained and reducing noise from rotating parts. It restores a proper enclosure after service or repair. What it does:

• Covers and protects the dryer drum and internal components from lint and debris.
• Helps maintain proper drum alignment and reduces rubbing or scraping noises.
• Prevents loose items from entering the cabinet during operation.
• Supports correct airflow paths to help the dryer operate as intended.

• One tub cover for the dryer.

• Recommended for technicians or experienced DIYers; follow the dryer manufacturer's service manual.
• Disconnect power (unplug electric or switch off gas/electric supply) before beginning work.
• Keep fasteners and any removed panels organized for reassembly; verify seal and fit before use.
• If you encounter broken clips or additional damaged parts, inspect adjacent components and replace as needed.

The Ground Screw is an OEM part for GE dryers. It ensures proper grounding and electrical safety for your dryer. This screw securely connects the ground wire to the dryer chassis, providing a path for electrical current to safely discharge in the event of a fault or power surge.

A bad Ground Screw can lead to electrical issues and potential safety hazards. Causes of a bad Ground Screw can include corrosion, loose connections, or damage due to accidental mishandling or improper installation.

Symptoms of a bad Ground Screw include:

• Intermittent dryer operation
• Visible signs of damage or deterioration on the screw or ground wire
• Tripped circuit breakers or blown fuses

Replace your faulty or damaged Ground Screw with this genuine OEM GE part to ensure proper grounding and electrical safety for your dryer. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This replacement Basket (4.8) restores a damaged or missing interior storage basket so you can organize and secure items inside your appliance for normal use. It fits the original mounting style and restores proper containment. What it does:

• Holds and separates small items that sit inside the appliance compartment
• Replaces cracked, broken or missing baskets that allow items to fall or shift
• Restores proper fit so drawers/shelves close and operate as intended
• Helps prevent spills and keeps contents organized during use

• One replacement Basket (4.8)

• Inspect the mounting area for broken clips or debris before installing
• Install by sliding or snapping the basket into position until it seats securely
• Use care to avoid pinching fingers; wear gloves if edges are sharp

This jumper harness is an OEM-style electrical connector harness that restores reliable connector-to-connector wiring between components. It replaces a worn or damaged harness to help re-establish proper electrical connections and operation. What it does:

• Links two or more electrical connectors to complete a circuit between controls and components.
• Replaces damaged, frayed, or corroded wires that can cause intermittent operation or loss of power.
• Commonly used when console, control board, or component-to-component connections fail or show error symptoms.
• Helps eliminate open circuits and poor connections that trigger faults or prevent operation.

• One jumper harness as shown

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Match connector shapes and wire colors before connecting; do not force connectors together.
• Route and secure the harness away from moving parts and heat sources; use existing clips or ties.

This inverter jumper harness connects the refrigerator's inverter board to the main control, restoring the electrical pathway needed for proper inverter operation. Replaces a damaged or worn harness to help resolve intermittent power or communication issues. What it does:

• Provides the electrical connection between the inverter module and the main control board
• Transmits power and signal needed for inverter-driven compressor operation
• Commonly used when a frayed or damaged harness causes intermittent cooling, error codes, or compressor not running
• Helps eliminate poor connections that can trigger fault codes or erratic system behavior

• Disconnect power to the appliance before starting any repair
• Handle connectors gently; align pins and secure clips to avoid damage
• Route the harness away from moving parts, sharp edges, and heat sources

This inner drain hose mounting panel secures and routes the inner drain hose so wastewater flows correctly and stays clear of moving parts. It helps maintain reliable drainage and reduces pinch or chafe points that can cause leaks. What it does:

• Holds the inner drain hose in the correct position and alignment
• Prevents the hose from rubbing against sharp edges or moving components
• Helps reduce risk of hose kinks that can restrict drainage
• Supports stable hose routing during normal operation and access

• One inner drain hose mounting panel

• Installation requires access to the appliance interior; disconnect power before servicing
• Use existing fasteners or replace with OEM-specified screws as needed
• Inspect hose and clamps while installing; replace damaged hoses or clamps separately

This left-side connector bracket secures a wiring connector or harness to the appliance frame, keeping electrical connections stable and reducing strain on terminals for reliable operation and easier component access. What it does:

• Holds and positions a wiring connector or harness on the left side of the appliance
• Prevents connector movement that can cause intermittent electrical contact or wiring stress
• Keeps terminals aligned for easier reconnection during service or part replacement
• Helps protect connectors from vibration and accidental disconnection

• Disconnect power to the appliance before beginning any repair.
• Remove any panels or components necessary to access the existing bracket; basic hand tools are typically required.
• Transfer the wiring connector into the new bracket without forcing; ensure secure seating and proper alignment.
• Inspect surrounding wiring and terminals for damage and replace or repair as needed.

This right-side connector bracket supports and secures an electrical or wiring connector assembly to the appliance chassis, restoring proper connection alignment and reducing strain on wiring. Fits the original mounting location and shape. What it does:

• Holds the appliance electrical connector in the correct position to prevent loose or strained wiring
• Maintains secure contact for reliable power or signal transfer
• Prevents connector movement that can cause intermittent operation or arcing
• Replaces a cracked, broken, or missing bracket that no longer secures the connector

• One right-side connector bracket

• High-level replacement only; bracket orientation should be confirmed before tightening fasteners
• Use proper-size fasteners and do not overtighten to avoid cracking the part
• Disconnect power to the appliance before starting any repair to avoid shock or damage
• If wiring or connectors are damaged, replace or repair those components per manufacturer instructions