Gtw750 Parts

This washer recirculation tube carries wash water from the recirculation pump back to the tub's spray/waterfall outlet. Replacing a worn or damaged tube helps stop leaks and restores even soaking and detergent distribution.

• Routes water from the recirculation pump to the tub flume/spray during the wash cycle
• Cracks, splits, or loose connections can cause leaks under or inside the cabinet
• Kinks or blockages reduce or stop the recirculation stream, leading to poor cleaning results
• Replace if the tube is brittle, swollen, clogged, or visibly worn

• Disconnect power and turn off water supplies; place towels to catch residual water
• Access the tube routing path and note original orientation and clip points before removal
• Transfer/reuse clamps as needed; fully seat the tube on fittings and route exactly like the original to avoid kinks
• Reassemble and run a short test to check for leaks and proper spray/recirculation

The Top Cover is an OEM part for GE washing machines. It serves as the top panel enclosure for the washer, covering internal components and shielding them from potential water damage or intrusion of foreign objects. The top cover also plays a cosmetic role, providing a sleek design finish to the top of the appliance.

Symptoms of a bad top cover include:  

• Cracks, breaks, or looseness developing in the plastic material over time
• Missing or damaged mounting screws  
• Water leaks or moisture inside the panel enclosure area
• Dents, dings, or other exterior damage affecting appearance

Causes of a bad top cover are generally related to wear and tear from repeated usage and loading/unloading of clothes over the years. General handling can also lead to minor impacts or stresses that result in cracks or breaks.

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This factory-spec screw secures internal brackets, housings, and panels. Replacing a missing, stripped, or corroded fastener with the correct #6-32 size restores a tight, corrosion-resistant fit that keeps assemblies aligned and helps reduce vibration noise.

• Provides #6-32 machine-thread fastening for appliance components
• Helps maintain alignment and stability of brackets, housings, and panels
• Replaces stripped, rusted, or missing hardware that can cause looseness or rattling
• Stainless construction resists corrosion in high-moisture areas

• Disconnect power and, if applicable, shut off the water supply before servicing
• Start threads by hand to avoid cross-threading; use the correct driver for the head type
• Tighten snugly without overtightening, especially into plastic or thin sheet metal

This harness wire tie secures and organizes the appliance's wiring harness. Replacing a damaged or missing tie keeps wires properly routed and protected to help prevent chafing, disconnections, and vibration noise for more reliable operation. What it does:

• Bundles and anchors wiring harnesses along the intended routing path
• Helps prevent wire insulation from rubbing, pinching, or wearing through
• Reduces rattling or vibration noise from loose wires
• Common signs include a broken/missing tie, dangling wires, or visible wear on the harness

• 1 harness wire tie

• Disconnect power before servicing; allow any moving parts to stop
• Note original wire routing and mounting location; take a photo for reference
• Install the new tie at the same point and snug it just enough to secure without crushing wires; trim excess strap
• Verify wires are clear of moving or hot components before restoring power

A small mounting support that provides a stable anchor point for screws used to secure panels or internal assemblies. Replacing a damaged screw platform restores proper fastener engagement and reduces panel movement and vibration. What it does:

• Anchors screws to hold trim, panels or internal components in place
• Restores secure attachment when the original mounting point is cracked or worn
• Helps eliminate rattling, loose panels, or alignment issues caused by a failed mounting surface
• Works with the appliance's existing screws and surrounding hardware to maintain structural fit

• Disconnect power to the appliance before attempting any repair
• Use the correct screws and a properly sized screwdriver to avoid further damage
• Inspect surrounding mounting points and replace any stripped screws or damaged clips as needed

The Lid Hinge is an OEM part for GE washers. It provides the mounting and fulcrum point for the washer lid, allowing smooth movement between open and closed positions. The sturdy hinge construction is designed to withstand repetitive use over many cycles.

Causes of a bad lid hinge can include fatigue from extended use, damage or loosening of mounting screws, or impact dents deforming the metal.

Symptoms include:

• Looseness, wobbling, or sagging of the washer lid 
• Difficulty fully opening or closing the lid securely
• Noise or squeaking emitted from the hinge area
• Physical deformation reducing the proper range of motion

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replacing a worn or faulty lid hinge ensures comfortable, predictable lid movement for years to come.
 

This dispenser lid bezel restores the finished trim around your refrigerator's ice and water dispenser, improving appearance and protecting internal dispenser components from dirt and damage. Simple replacement for cracked, warped, or missing trim. What it does:

• Replaces damaged or cracked dispenser trim to restore a clean, finished look.
• Protects dispenser components and helps keep the dispensing area free of debris.
• Helps maintain proper alignment and access to the dispenser opening for smooth filling.
• Common symptom: visible cracks, chips, warping, or missing bezel trim.

• Disconnect power to the appliance before starting work; shut off the refrigerator's water supply if applicable.
• Use basic hand tools and a non-marring pry tool to remove the old bezel and snap or screw the replacement into place.
• Inspect mounting clips or screws during removal and replace any that are damaged.

The Clamp is an OEM part for GE washers. It is used to securely fasten critical components like hoses, sensors, and wiring harnesses in place inside the washer cabinet. 

As a machine that handles water, chemicals, and moving parts, a washer requires many clamps to organize its internal systems. They ensure hoses and electrical wiring remain properly positioned and protected throughout years of operation. Without solid clamps, connections could loosen or detach, leading to leaks or electrical faults.

Causes of a bad clamp can include fatigue from constant vibration, outright breakage from impact or tension overload, or rust/corrosion damage over extended use. 

Symptoms of a failed clamp include:

• Loose, disconnected or damaged hoses and wiring  
• Water leaks from hose connections
• Electrical or sensor errors

The clamp is also compatible with some Kenmore and other brands that use GE components.

A #8-18 x 9/16-inch hex washer head screw used to secure panels and components in appliances. Provides a proper fit for fast, reliable fastening when replacing missing, damaged, or stripped screws. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable.
• Restores proper fastening when threads are stripped, the original screw is missing, or a head is damaged.
• Helps stop rattling or loose parts caused by worn or broken fasteners.
• Fits applications requiring a #8-18 thread with a 9/16" length and hex washer head style.

• Verify thread size, head style, and length before installation.
• Use the correct hex driver or socket to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or deforming parts.
• Disconnect power and follow appliance-specific safety steps.

This 10-32 hex head screw secures appliance panels and components where a small machine screw is required. It provides a durable, threaded fastening point for repair or reassembly. What it does:

• Fastens panels, brackets, and small components using a 10-32 machine thread
• Hex head accepts a 7/16" socket or wrench for positive torque application
• Replaces worn or damaged screws that cause loose or rattling parts
• Compatible with common metal-to-metal and tapped-hole connections

• One 10-32 hex head screw with 7/16" socket head

• Use the correct 7/16" socket or wrench to avoid rounding the head
• Thread engagement should match the appliance's threaded insert; do not force if resistance is felt
• Follow manufacturer service manual for torque specs and installation sequence
• Disconnect power and follow safety procedures before servicing the appliance

This clip spring cover is a small plastic retainer that secures the spring/clip assembly on compatible appliances, helping keep moving parts aligned and reducing rattles or loose components. Replaces a worn or broken cover to restore proper fit. What it does

• Covers and holds a spring or clip in place to prevent displacement during operation
• Keeps assemblies aligned to reduce noise and intermittent part contact
• Helps maintain consistent tension where a spring or clip is used
• Commonly replaced when the original cover is cracked, broken, or missing

• One clip spring cover

• High-level replacement; basic hand tools may be required to access the location
• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Inspect adjacent springs/clips for wear and replace if damaged

8-18 hi/lo 5/8

This fabric softener drawer is the replacement dispenser cup that holds and releases liquid fabric softener during the wash cycle, restoring proper softener delivery and preventing overflow or buildup in the drawer area. What it does

• Holds fabric softener and routes it into the washer at the correct time in the cycle.
• Helps prevent over-dispensing and keeps softener contained until release.
• Restores proper drawer operation when the original is cracked, warped, or clogged.
• Can stop leaks or drips from the dispenser area caused by a damaged drawer.

• Disconnect power to the appliance before beginning any service.
• Remove the old drawer by pulling it out and releasing any retention clips; install the new drawer by sliding until it seats.
• Inspect the dispenser housing for residue or damage and clean before installing the replacement.

This replacement screw fastens appliance panels, brackets, and trim. The 8-18 thread with 1-3/4-inch length provides reliable bite in sheet metal or plastic, restoring a secure fit when an original fastener is missing or damaged.

• Secures panels, brackets, and trim to the cabinet or frame
• Replaces lost, stripped, or corroded fasteners
• Helps address loose or rattling panels, minor gaps, or misalignment
• Appropriate for sheet-metal applications that require ~1-3/4-inch reach

• Disconnect power before servicing; wear cut-resistant gloves
• Support the panel or part being fastened and use the correct driver for the screw head
• Start threads by hand to avoid cross-threading; do not overtighten into plastic or thin metal
• Repair or replace the anchor before installing

This knob assembly replaces a worn, broken, or missing control knob so you can reliably select heat or settings on your range or cooktop. It restores safe, accurate user control and a finished appearance. What it does:

• Fits onto the control shaft to allow turning the switch for burner/oven settings
• Restores tactile grip and clear position selection when the original had stripped or cracked
• Helps stop slipping or intermittently losing contact between the user and the control
• Suitable for use where the original knob assembly is damaged or missing

• Disconnect power (or turn off gas appliance supply) before servicing controls.
• Push the knob straight onto the control shaft until fully seated; pull straight off to remove.
• Inspect the switch/shaft for damage; replace the switch or shaft if the knob does not seat securely.

This is a 8-18 x 1/2 inch hex washer head screw used to secure appliance panels and components. It provides a reliable, corrosion-resistant fastener for repair or reassembly tasks. What it does:

• Fastens panels, brackets or trim where an 8-18 x 1/2" screw is specified
• Hex washer head offers wider bearing surface to prevent pull-through
• Stainless finish resists rust and corrosion in humid appliance environments
• Restores proper fit and function when original screw is missing or damaged

• One 8-18 x 1/2 in. hex washer head stainless screw

• Use the correct driver/socket to avoid stripping the head
• Tighten securely but avoid over-torquing to prevent damage to plastic or thin metal parts
• Disconnect power and follow appliance safety precautions before working inside the unit
• Replace only with the same size and head style for proper fit