Gtw750 Parts

This decorative badge is the exterior emblem that mounts to the appliance cabinet or door to restore factory appearance and identification. It replaces a missing, faded, cracked, or detached emblem for a clean, finished look. What it does:

• Replaces a worn, damaged, or missing appliance emblem
• Restores original exterior appearance and branding visual
• Prevents loose badges from catching on clothing or edges
• Designed to match OEM fit and finish for a seamless look

• Typically installs on the appliance front using clips or adhesive
• Clean and dry the mounting surface before installing to ensure proper adhesion or fit
• Avoid excessive force when seating the badge to prevent damaging trim or clips
• Wear gloves to protect finish and follow general appliance-safety practices

This tub cover replaces the top washing-tub cover that protects internal components and helps contain water and agitation inside the wash basket. It restores the washer's sealed tub appearance and helps prevent direct contact with the internal tub. What it does

• Covers the top of the washer tub to help keep water and laundry inside the wash basket
• Shields internal components from splashes and debris during a wash cycle
• Helps maintain correct spacing and alignment for the tub assembly
• Commonly replaced when cracked, warped, or visibly damaged

• One tub cover

• Disconnect power and water supply before starting any repair
• Remove control panel/agitator and/or trim as required to access the tub cover
• Replace the cover without forcing parts; check for proper fit and alignment before reassembling

A replacement pressure hose that connects the washer's tub to the water-level sensor to help the machine detect and maintain correct fill levels. Restores reliable water-level sensing and helps prevent overfilling or incorrect cycle fills. What it does:

• Routes air/water pressure from the wash tub to the water-level (pressure) switch or sensor
• Allows the control to accurately detect and maintain proper water level
• Commonly replaced when the washer overfills, underfills, shows erratic fill behavior, or displays water-level related errors
• Keeps pressure path clear when original hose is cracked, kinked, clogged, or leaking

• One replacement pressure hose

• Disconnect power and shut off the water supply before beginning work
• Replace only with the exact part and maintain original routing and clamp locations
• Inspect and replace any damaged clamps or connectors; ensure secure, airtight connections
• After installation, run a test cycle to check for leaks

This dual harness connector is a direct-fit replacement plug that secures two wire harnesses to restore a reliable electrical connection. It helps eliminate loose or intermittent wiring connections for affected appliance circuits. What it does:

• Provides a secure, snap-fit connection between two wire harnesses
• Restores continuity to circuits that show intermittent power, no power, or erratic operation
• Holds wiring in proper alignment to prevent accidental disconnection
• Used where a dual-wire plug mates to a control, switch, or component

• One dual harness connector

• Always disconnect power to the appliance before servicing
• Inspect wire ends and terminals for damage; replace or repair wiring if needed
• Use appropriate tools to seat the connector fully; do not force or bend terminals

This jumper harness is an OEM-style electrical connector harness that restores reliable connector-to-connector wiring between components. It replaces a worn or damaged harness to help re-establish proper electrical connections and operation. What it does:

• Links two or more electrical connectors to complete a circuit between controls and components.
• Replaces damaged, frayed, or corroded wires that can cause intermittent operation or loss of power.
• Commonly used when console, control board, or component-to-component connections fail or show error symptoms.
• Helps eliminate open circuits and poor connections that trigger faults or prevent operation.

• One jumper harness as shown

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Match connector shapes and wire colors before connecting; do not force connectors together.
• Route and secure the harness away from moving parts and heat sources; use existing clips or ties.

A single replacement screw used to secure the lid hinge on top-load washers. Replaces a worn or missing hinge fastener so the lid stays aligned and operates smoothly. What it does

• Secures the lid hinge assembly to the washer cabinet or lid
• Restores proper lid alignment and reduces wobble or sagging
• Helps stop the lid from shifting, binding, or making noise when opened/closed
• Used when original screw is missing, stripped, or damaged

• One lid hinge screw

• Disconnect power and water supply before working on the washer
• Support the lid and hinge assembly while removing and installing the screw to prevent injury or damage
• Use the correct screwdriver or bit to avoid stripping the screw head

Replace a worn or unresponsive user interface with this control panel assembly to restore reliable touch and display control. It provides the ready-made front electronics and keypad needed to operate the appliance's functions. What it does:

• Replaces a cracked, faded, or sticky keypad and its underlying control electronics
• Restores responsive touch/buttons and visible display/LED indicators
• Fixes symptoms such as unresponsive buttons, blank or garbled display, or intermittent control behavior
• Supports normal cycle selection and starts/stops user commands when properly installed

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Handle the assembly carefully to avoid damage to the glass, keypad, or connectors
• Installation typically requires removing the front bezel or control housing; keep screws and small parts organized

This snap-in lid beauty plug restores the finished look of the washer lid and covers exposed screw holes for a cleaner appearance. It helps keep dirt and moisture out of the hinge/screw area while smoothing rough edges. What it does:

• Covers exposed holes or damaged trim on the washer lid to improve appearance.
• Helps block dirt and moisture from reaching screw heads and hinge openings.
• Prevents rough edges from catching clothing or skin.
• Useful when the original plug is missing, cracked, or worn.

• One lid beauty plug (snap-in cover).

• High-level DIY: usually presses into place—no special tools required.
• Always disconnect power to the appliance before working on or near electrical components.
• Avoid forcing the plug; align and press evenly to prevent breakage.
• If mounting area is damaged, replacement of surrounding trim may be required for a secure fit.

This left backsplash support secures the left side of a range or stove backsplash, keeping the backsplash aligned and stable for safe, reliable operation. It replaces a bent or broken support to restore proper fit and appearance. What it does:

• Holds and supports the left edge of the backsplash to prevent sagging or separation
• Restores proper alignment so control panels and trim sit flush
• Helps stop rattling or vibration caused by a damaged support
• Commonly replaced when the support is bent, cracked, or missing

• Install with the appliance unplugged and controls off; disconnect power at the breaker for electric ranges.
• Depending on model, you may need to remove the backsplash trim or rear panel to access mounting points.
• Use correct-size fasteners and verify secure attachment; avoid overtightening to prevent cracking.