Gtwn 4250D1ws Parts

A single replacement screw used to secure appliance panels, trim, and internal brackets so components stay aligned and reduce rattling. Simple, direct-fit fastener for restoring proper mounting and stable operation. What it does:

• Secures panels, mounting brackets, trim pieces and other appliance components
• Helps stop rattling, vibration, or loose panels caused by missing or stripped fasteners
• Restores proper alignment of doors and access panels when original screw is lost or damaged
• Matches the OEM fastening point for a straightforward hardware replacement

• Disconnect power to the appliance before working on electrical components or access panels
• Use the correct screwdriver to avoid stripping the head; match drive type to the screw
• Tighten firmly but do not overtighten—stop when snug to avoid damaging threads or parts
• Keep removed fasteners organized and compare with the replacement to ensure correct fit

This shipping bar assembly secures the oven door and internal components during transport to prevent movement and damage. Replacing a damaged or missing shipping bar helps ensure the range or oven door stays protected while moving the appliance. What it does:

• Holds the oven door and internal parts in place during shipment to reduce jostling and impact
• Prevents door misalignment or damage caused by transit
• Helps avoid rattling or loose parts after relocation
• Used only for transport/protection; remove before regular appliance operation if instructed by manufacturer

• One shipping bar assembly

• Intended for use during shipping/transport — confirm removal instructions in your owner's manual before operating the appliance
• Install or remove with the appliance powered off and according to manufacturer guidance
• Keep small fasteners and clips secure; replace any missing hardware with OEM-specified parts

The Mode Shifter Kit is an OEM component for GE washers designed to last through many load cycles. As an essential mechanism, it allows the washer to switch between available cycles like normal, heavy-duty, spin, and more. 

Symptoms of a failing mode shifter include:

• Inability to select certain wash modes or cycles 
• Delays during the wash cycle
• Strange noises coming from inside the washer

Causes of a bad mode shifter can be typical wear and tear, an overloaded washer, or physical impacts inside the unit. With proper use and maintenance, the average lifespan is 7-10 years.

The part fits Hotpoint, RCA, and select Kenmore models as well.

This damper assembly controls airflow between compartments to help maintain even refrigerator temperatures and proper cooling. It replaces a worn or broken damper to restore regulated cold-air flow and reduce temperature imbalance. What it does:

• Opens and closes to direct cold air where needed, regulating compartment temperatures
• Restores airflow control when the original damper is stuck, cracked, or broken
• Can stop symptoms like uneven cooling, temperature fluctuations, or weak air movement
• Works with the refrigerator's control system to modulate vent position as needed

• One damper assembly

• Disconnect power to the appliance before starting any service
• Access may require removing interior panels, the fresh-food evaporator cover, or a control housing
• Handle the damper fins and linkage carefully to avoid damage or misalignment

This upper door ball joint connects the refrigerator door to the hinge, allowing smooth pivoting and proper door alignment. Replacing a worn or damaged ball joint restores secure door movement and helps maintain a tight seal. What it does:

• Provides a pivot point between the door and top hinge for smooth opening and closing
• Keeps the door aligned to prevent rubbing, sagging, or uneven gaps
• Helps the door seal correctly to preserve internal temperature
• Commonly replaced when the door feels loose, binds, or the joint shows visible wear

• Disconnect power to the appliance before starting any repair
• Typically accessed from the top hinge area after removing the hinge cover and/or door as required
• Use basic hand tools; support the door to prevent damage while replacing the joint

This is a 8-18 x 1/2 inch hex washer head screw used to secure appliance panels and components. It provides a reliable, corrosion-resistant fastener for repair or reassembly tasks. What it does:

• Fastens panels, brackets or trim where an 8-18 x 1/2" screw is specified
• Hex washer head offers wider bearing surface to prevent pull-through
• Stainless finish resists rust and corrosion in humid appliance environments
• Restores proper fit and function when original screw is missing or damaged

• One 8-18 x 1/2 in. hex washer head stainless screw

• Use the correct driver/socket to avoid stripping the head
• Tighten securely but avoid over-torquing to prevent damage to plastic or thin metal parts
• Disconnect power and follow appliance safety precautions before working inside the unit
• Replace only with the same size and head style for proper fit

This suspension rod and spring assembly supports the washer tub and helps control vibration during spin. Replacing a worn assembly restores stable operation and reduces banging, shaking, and off-balance conditions.

• Supports and centers the tub within the cabinet
• Provides spring tension to absorb movement during agitation and spin
• Helps limit vibration and banging noise
• When worn, you may notice shaking, walking, off-balance loads, or the tub leaning

• Disconnect power and water; wear gloves and eye protection
• Support the tub before removing the old rod
• Replace one rod at a time and ensure both ends seat fully in their retainers
• After installation, level the washer and run a test spin to check vibration

Size: 8 - 18 ab.

This backsplash assembly replaces the rear control-panel panel on a freestanding range, restoring a clean appearance and proper mounting for the controls. It covers wiring and support points behind the cooktop for safe, reliable operation. What it does:

• Replaces damaged, bent, or corroded rear panel that exposes wiring or mounting points
• Restores proper mounting surface for control components and trim pieces
• Helps prevent debris from entering the cabinet area behind the cooktop
• Improves the appliance's appearance by replacing scratched or dented sheet metal

• One backsplash assembly

• Disconnect power to the range before starting; verify electrical is off at the breaker
• Remove the cooktop or control panel per manufacturer instructions to access mounting screws
• Handle edges carefully—this is sheet metal and may be sharp; wear gloves and eye protection
• Some installations may require a second person to steady the range or align the panel

This spring-style hose clamp secures flexible appliance hoses to fittings to prevent leaks and hose separation. Replaces worn or damaged clamps to restore a tight, reliable hose connection. What it does

• Holds drain, inlet, or discharge hoses firmly to prevent leaks at fittings
• Stops hoses from slipping off during appliance operation or vibration
• Commonly replaced when rusted, stretched, or visibly damaged
• Helps eliminate intermittent leaks and water pooling under the appliance

• One hose clamp

• Disconnect power and water supply, and drain residual water before starting
• Use pliers to expand the spring clamp for removal and installation
• Ensure clamp sits squarely over the hose and fitting bead for a secure seal
• Replace with the same style and size; do not overtighten or modify the clamp

This is a replacement hex-washer-head screw used to secure panels, brackets, or components on compatible appliances. It restores proper fastening where original mounting hardware is missing or damaged. What it does

• Fastens panels, trim, or internal brackets to maintain correct alignment and stability
• Helps prevent vibration, rattling, or loose parts caused by worn or missing fasteners
• Matches OEM head style for correct fit with corresponding driver/socket
• Used where a 1/4-20 threaded fastener is specified by the manufacturer

• Disconnect power to the appliance before servicing to avoid electrical shock or injury
• Use the correct driver/socket for the hex washer head to avoid stripping the fastener
• Hand-start the screw to ensure proper thread engagement; tighten securely but avoid over-torquing

A flat washer used at the water valve connection to create a reliable seal and help prevent leaks. Small, simple replacement that restores a tight water inlet connection and reduces drip or seepage around the valve. What it does:

• Seats between the water valve fitting and hose or tube to form a watertight seal
• Helps stop leaks or slow drips originating at the valve connection
• Stabilizes the connection to reduce movement-related wear
• Common symptom: visible leaking or dripping at the valve or hose connection

• Turn off water supply and unplug the appliance before servicing
• Remove the hose or fitting, replace the old washer, and reseat the connection
• Hand-tighten fittings, then snug slightly with a wrench—avoid over-tightening
• Inspect valve/gasket surfaces for debris or damage and replace if worn

This genuine replacement clip secures interior appliance parts so panels and components stay in place and operate quietly. It restores proper fit and helps stop rattles or loose trim caused by a broken or missing retainer. What it does:

• Secures and aligns panels, trim, or internal components to prevent shifting
• Stops rattling or vibration caused by a loose or missing clip
• Restores proper fit where the original fastener has broken or worn
• Fits the original mounting point and snaps into place for a firm hold

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access the clip location by removing the panel or trim per your model's service instructions
• Press the clip into the mounting slot until it snaps; replace any damaged surrounding hardware

This electronic control and firmware assembly manages a range of appliance functions, replacing the unit that runs the user interface, cycles, and system logic to restore correct operation. What it does:

• Runs the appliance's control logic and firmware to manage cycles and timed events
• Interfaces with the user controls and display to process inputs and show status
• Sends signals to motors, valves, heaters, and other components to execute commands
• Can resolve symptoms like unresponsive controls, incorrect cycle operations, or persistent error codes tied to the main control

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Handle the board carefully; avoid touching circuit traces and use anti-static precautions if available
• Access typically requires removing control panels or console trim
• Some installations may require reprogramming or calibration per manufacturer instructions.

Alignment pin keeps the appliance door hinge aligned so the door closes evenly and seals correctly. Replacing a damaged pin restores proper door fit and helps stop sagging, rubbing, or uneven gaps. What it does:

• Positions and secures the door hinge during normal operation
• Restores correct hinge alignment when pins are worn or bent
• Helps eliminate door sag, misalignment, grinding, or difficulty closing
• Works with the hinge assembly to maintain an even seal and proper door movement

• Disconnect power to the appliance before beginning any repair; ensure the appliance is stable and cool.
• Support the door or hinge assembly while removing and installing the pin to avoid dropping or misaligning heavy components.
• Use basic hand tools; ensure pin orientation and full engagement in the hinge before testing.
• Keep small parts and fasteners secure during reassembly and test the door several times to ensure proper operation.