Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Color: Black
I replaced the broken glass door and the retainer clips to hold it in place. Read more
Color: Gray. Size: Small. For black order WP3191898. For the large cap order WP3191905.
Took down model# and tried to match on website. However there were 5 sub-models. Had to look very carefully at the pictures of the parts. Also, there were 3 different size caps on the range. Ordered one small, 2 medium, and one large. Arrived in 48 hours. Perfect match. Placed on burners. Repair complete. Read more
Order parts from you Read more
Size: 8-18 x 3/8 inch.
Location: Left front. 14,000 BTU.
Unplug the power cord and shut the gas to the stove. First remove the knobs then remove the 2 screws on either side of the stove. Open the oven door and remove 3 screws on the underside. You can now lift up the glass touch pad, then disconnect the wiring harness. Now lift up to remove the 2 connected igniter switches to expose the burner valves. Use a wrench for the inlet side and a socket wrench for the front side. Pull back on the gas tube and pull out the valve from the manifold. Reassemble... Read more
Color: Black. Size: Large. 14,000 BTU.
Pulled out the range,removed the knobs, removed two screws on lower left side of the front panel, pulled old end cap and front panel out to gain clearance. removed old end cap, put new one in place and fastened in place, pushed range back in place. Read more
Color: White
Replaced it with glass purchased from Appliance Parts PROS Read more
This OEM replacement part is an oven control board. The control board serves as the main computer to the oven and controls all its essential functions such as baking, maintaining temperature, as well as turning it on and off. If the oven is no longer turning on, or there is an error code on the digital display, this could mean that the control board is no longer operable. Luckily replacing a control board is a relatively simple process.To begin, make sure to unplug the oven. After the power has been shut off, proceed to remove the upper back panel of the range. Once removed gain access to the old control board and snap it out of the locking tabs holding it in place. Take note of the orientation of the wires by taking a photo with a phone camera. Remove the wire harness and individual wires from the old board and place them into the correct terminals of the new board. Snap the new board back in place and reinstall the upper back panel.This genuine replacement part is sold individually and is compatible with General Electric, Hotpoint, and RCA brand ovens.
Replaced it with a new one. Read more
Door switch for oven light.