Gwe 4200 Acb Wall Parts

The Lower Door Bin is an OEM replacement part for GE refrigerators. It is designed to provide storage space and organization on the lower right side of your refrigerator door.

A bad lower door bin can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as a cracked or broken bin, difficulty in storing items on the door, or items falling off the shelf, it may indicate a faulty or malfunctioning lower door bin.

Symptoms of a bad lower door bin include:

• Cracked or broken bin
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's lower right door by replacing the faulty shelf bin with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Replace a damaged crisper top with this vegetable drawer cover with glass. It forms the shelf above the vegetable bins, supports stored items, and helps contain small spills so drawers slide correctly and food stays organized.

• Forms the top surface over the vegetable/crisper drawers and supports food placed on it
• Helps contain minor spills above the bins to reduce leaks into drawers
• Restores proper alignment so crisper drawers open and close smoothly
• Common failure signs: cracked or shattered glass, broken frame tabs, sagging or unstable shelf

• Disconnect power to the refrigerator before servicing and handle glass carefully
• Remove items from the shelf area and slide crisper drawers out
• Lift the old cover straight up and out; set the new cover onto the support rails, ensuring tabs are fully seated
• Reinstall drawers and contents; verify drawers glide smoothly

The Meat Pan Slide is an OEM part for GE refrigerators. It is located on the upper shelf and allows for pulling out a multi-purpose pan ideal for storing large food items. 

Causes of a bad Meat Pan Slide can include damage or deformity from exposure to heavy loads over time, broken or cracked plastic parts from repeated pull-out/push-in movement, or obstruction from built-up ice or debris inside the rails.

Symptoms of a bad Meat Pan Slide include:

• The slide becomes stuck and failing to extend or retract
• Gaps appearing between the slide and rails allowing for food items to fall 
• Cracked or broken parts that cause instability or inability to properly support food pans

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Refrigerator Evaporator with Heater is an OEM part for GE refrigerators. This component cools the air within the freezer and fresh food compartments through vaporization and circulation. It also contains an internal heater to prevent condensation and frost formation.

Causes of a bad evaporator can include normal wear over time, damage from leaks, or issues with the heater component. 

Symptoms of a bad evaporator include:

• Inadequate or inconsistent cooling within compartments  
• Frost or condensation buildup that requires frequent defrosting
• High energy usage but inability to maintain proper temperatures
• Foreign or musty odors emanating from within the refrigerator

Replace this evaporator to restore optimal cooling performance, efficiency, and freshness preservation in your refrigerator. This GE OEM part is also compatible with later Hotpoint, RCA, and select Kenmore refrigerator models.
 

This refrigerator vegetable drawer replaces a damaged or missing crisper bin in the fresh food section. It restores a smooth-sliding space to organize produce and helps keep items contained for easy access and a tidier interior.

• Stores fruits and vegetables in the fresh food compartment; slides on the existing tracks
• Replaces cracked, warped, or broken drawers and restores proper fit if the bin is missing
• Helps contain minor spills and keep contents separated
• A drawer that sticks, falls off the rails, or won't stay aligned is a common replacement indicator

• Empty the area and open the door fully to clear the stops
• Lift the front of the old drawer slightly and pull straight out; tilt as needed to remove
• Align the new drawer with both rails and slide it in until fully seated
• Inspect the drawer guides and shelf frame for damage and replace related parts if needed

This access cover closes a service opening on the refrigerator cabinet, protecting internal components and restoring a secure, finished fit. Replacing a cracked or missing cover helps keep debris out and supports proper operation and airflow paths.

• Covers the machine/service compartment to shield wiring, fan, and other components from contact and debris
• Helps maintain designed airflow through the compartment when properly installed
• Reduces vibration and rattling when the cover is secured
• Replace if the cover is missing, cracked, warped, or no longer fastens securely

• Disconnect power before servicing
• Remove any retaining screws/clips and note the cover's orientation and vent/slot alignment
• Transfer any original grommets or insulation to the new cover if present
• Reinstall with existing hardware; do not overtighten; ensure openings/vents remain unobstructed

The Water Filter Head and Insulation Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for securely holding the water filter in place and insulating it from external temperature changes, which helps maintain the temperature of the filtered water, ensuring that it remains cool.

A bad water filter head and insulation assembly can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as water leaks around the filter area, reduced water flow, or a decrease in the effectiveness of the water filter, it may indicate a need to replace this assembly.

Symptoms of a bad water filter head and insulation assembly include:

• Water leaks around the filter area
• Reduced water flow or weak water pressure
• A decrease in the taste or quality of the filtered water

Restore you refrigerator by replacing the faulty water filter head and insulation assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Icemaker Fill Cup is an OEM replacement part for GE refrigerators responsible for directing the water flow into the icemaker, allowing for the creation of ice cubes. It securely attaches to the icemaker, preventing any leaks or spills that could disrupt the ice production.  

A bad fill cup can occur due to several factors. Common causes include cracks, damage, or wear and tear over time. If you notice symptoms such as leaks around the icemaker, improper ice production, or water overflow, it may indicate a need to replace the fill cup.

Symptoms of a bad fill cup include:

• Leaks around the icemaker area
• Insufficient or inconsistent ice production
• Water overflow or spills

Restore your refrigerator's ice-making capabilities by replacing the faulty fill cup with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This intermediate freezer wire harness restores reliable electrical connections within the freezer section. It bridges the cabinet wiring to freezer components so they receive the power and control signals needed for consistent operation and dependable cooling performance.

• Provides a secure, plug-in connection between the main cabinet harness and freezer components
• Replaces harnesses with broken conductors, brittle insulation, or heat-damaged connectors
• Can help when freezer components have intermittent or no power, or when visible wiring/connector damage is present
• Maintains correct routing and strain relief to reduce chafing and shorts

• Disconnect power and wear cut-resistant gloves before servicing
• Photograph connector locations and wire routing for reference during reassembly
• Route the new harness along the original path; secure in existing clips/ties and avoid pinching or stretching wires
• Fully seat each connector until it latches; restore power and test operation

The Icemaker Fill Tube Heater is an OEM component specifically designed for GE refrigerators. Located near the icemaker assembly, this heating element plays a crucial supporting role.

Symptoms of a bad fill tube heater include:

• Irregular or inconsistent ice production amounts  
• Cracked, cloudy or malformed ice cubes being generated
• The icemaker failing to operate or stop working altogether
• Water or moisture around the refrigerator icemaker area 

Causes can include wear over time from powering on during each ice-making cycle. Mineral deposits may also form and insulate the heating surface, reducing effectiveness.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This replacement drain tube channels defrost and condensation water from the evaporator area to the drain pan, helping prevent water pooling and ice build-up in the fresh-food section. Restores proper drainage when the original tube is damaged. What it does:

• Directs defrost/condensation water to the drain pan during the refrigerator's automatic defrost cycle.
• Helps stop water pooling inside the fresh-food compartment and under crisper drawers.
• Reduces risk of frost or ice buildup near the evaporator when the original tube is cracked, kinked, or clogged.
• Provides a direct-fit replacement for the factory drain path when specified by OEM part number.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Remove food and drawer assemblies as needed to access the evaporator/drain area; some residual ice or water may be present.
• Clear any drain blockages and ensure the tube is seated without kinks so water flows freely to the drain pan.

The Center Hinge is an OEM part for GE refrigerators. It is responsible for connecting and supporting the refrigerator doors, allowing them to open and close smoothly.

A bad center hinge can be caused by wear and tear over time, excessive weight or force applied to the doors, or damage due to accidental impact or mishandling.

Symptoms of a bad center hinge include:

• Difficulty in opening or closing the refrigerator doors.
• Squeaking or grinding noises when opening or closing the doors.
• The doors not staying securely closed.
• Uneven alignment of the doors.

Replace your worn-out or damaged center hinge with this genuine OEM part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Evaporator Harness is an OEM replacement part for GE refrigerators. This harness is responsible for connecting the evaporator fan motor and the defrost heater to the main control board, allowing for cooling and defrosting. It enables the fan motor to circulate cold air throughout the refrigerator and the defrost heater to melt any accumulated frost or ice on the evaporator coils.

A bad evaporator harness can occur due to wear and tear, damage, or loose connections. If you notice symptoms such as inadequate cooling, excessive frost or ice buildup in the freezer, or the refrigerator not defrosting properly, it may indicate a need to replace the evaporator harness.

Symptoms of a bad evaporator harness include:

• Inadequate cooling
• Excessive frost or ice buildup in the freezer
• Improper defrosting

Restore your refrigerator by replacing the faulty evaporator harness with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
 

This 12-24 screw secures brackets, panels, and other hardware in GE refrigerator assemblies. Replacing a stripped or missing fastener restores a tight, rattle-free fit and helps keep doors, handles, and internal components properly aligned.

• Fastens components where a #12-24 screw is specified
• Replaces damaged, stripped, corroded, or missing hardware
• Helps resolve loose handles/panels, vibration noises, or minor misalignment caused by missing screws
• OEM-grade hardware for a precise fit in the designated locations

• Disconnect power; turn off water supply if working near water lines
• Match the new screw to the original; start threads by hand to avoid cross-threading
• Support the part being secured (door/handle/panel) during removal and installation
• Use the correct driver/bit that matches the screw head; tighten snugly without overtightening