Gwe9250pwo Parts

This tube clamp secures flexible water tubing to its fitting in refrigerators. It helps maintain a tight seal to prevent leaks and keeps lines from slipping off under normal operating pressure.

• Holds plastic or rubber tubing firmly on a barbed fitting or nipple
• Helps prevent drips and leaks at tube connection points
• Addresses loose or disconnected water lines
• Useful when tubing slips off or won't stay seated

• Disconnect power and shut off the water supply before servicing
• Position the clamp over the tube and fitting; compress with pliers and release to lock in place
• Ensure the clamp is centered and fully seated; tug-test the tube
• Restore water and power; check all connections for leaks

This hinge cap is the small trim piece that covers your refrigerator door hinge. Replacing a cracked or missing cap protects the hinge from dust and restores a clean, finished look to the door area.

• Covers and protects the door hinge hardware from dust and debris
• Restores a clean, factory-finished appearance
• Helps keep the hinge area clear for smooth door movement
• Replace when the original cap is cracked, loose, discolored, or missing

• Disconnect power before servicing the appliance
• Support the door to prevent movement while working near the hinge
• Remove the old cap; align and press the new cap onto the hinge until fully seated; reuse the original fastener if your model uses one
• Verify the cap is secure and does not rub as the door opens/closes

This light shield is the protective interior cover that helps protect the refrigerator light and direct interior illumination for better visibility. It replaces a cracked, yellowed, or missing lens to restore a finished look. What it does:

• Covers and protects the refrigerator bulb or lamp from impacts and food contact
• Helps diffuse and direct light for more even interior illumination
• Restores a clean appearance if the original shield is cracked, discolored, or missing
• Can reduce glare from the bulb and prevent debris buildup on the lamp

• One light shield / interior lamp cover

• Disconnect power to the appliance before replacing the shield
• Remove shelves or clips that obstruct access, then snap or slide the shield into place
• Inspect the bulb and socket while replacing the shield; replace the bulb if needed
• Handle the shield carefully to avoid scratches or cracks; use only genuine replacement parts

This replacement freezer drawer gasket creates a tight seal around the freezer drawer to help keep cold air inside and reduce frost buildup. Fits original mounting channels and restores proper drawer closure and insulation. What it does:

• Seals the freezer drawer to reduce air leaks and help maintain consistent temperatures
• Helps prevent frost and ice buildup by keeping warm, moist air out
• Restores a secure drawer closure for improved cooling performance
• Common symptom fix: cold loss, excessive frost, or a drawer that won't stay fully closed

• Inspect mounting channel and clean surface before installing; replace if channel is damaged
• Push gasket into place along the drawer perimeter; use gentle, even pressure to seat it fully
• If adhesive is present, allow recommended curing time before loading the drawer
• Disconnect power only if needed for access; follow basic safety precautions and appliance-specific service guidance

This condenser fan shroud directs cooling airflow across the condenser and keeps the condenser fan and motor securely positioned for reliable cooling performance. It helps maintain proper condenser airflow and protects fan components from contact. What it does:

• Guides airflow from the condenser fan to improve heat dissipation
• Holds the condenser fan motor and blade in the correct position
• Reduces the risk of fan-to-coil contact and related noise or damage
• Can help address symptoms like noisy fan operation, increased run time, or reduced cooling when damaged or missing

• Disconnect power to the appliance before beginning any work
• Handle carefully — edges and nearby sheet metal can be sharp
• Basic hand tools are typically required; follow OEM instructions for removal/installation

This door case wiring harness connects the refrigerator door components to the main cabinet harness, restoring reliable power and signal routing for lights, dispensers, and sensors. Replaces a damaged or frayed harness to help resolve intermittent or non-working door functions. What it does:

• Transfers power and control signals between the door and cabinet wiring
• Restores operation for door-mounted lights, dispensers, and sensors affected by broken wiring
• Prevents shorts or intermittent failures caused by frayed or pinched wires
• Matches OEM routing and connector locations for a direct-replacement fit

• One door case wiring harness

• Disconnect power to the appliance before starting work to avoid shock or injury
• Handle connectors gently and route wiring per cabinet clips to avoid pinching
• Verify connector orientation and seating; secure any retained clips or screws

The Pcb Asm Humidity Board is an OEM part for GE refrigerators. This humidity control board regulates the humidity levels within the refrigerator's crispers or drawers. It allows you to adjust and maintain the ideal humidity level for different types of produce, extending their shelf life and preserving their quality.

Symptoms of a bad humidity control board include:

• Inconsistent humidity levels
• Excessive moisture buildup
• Rapid spoilage of produce

A bad humidity control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as inconsistent humidity levels, excessive moisture buildup, or produce spoiling quickly, it may be time to replace the humidity control board.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This left-hand door side assembly is the cabinet-mounted control panel support that secures the refrigerator's control and user-interface components for reliable operation and a finished door appearance. What it does:

• Provides the left-side mounting and housing for the fridge control panel and associated switches
• Keeps control components aligned and secured to the door for consistent operation
• Restores proper fit and finish when the original door-side control housing is cracked, loose or damaged
• Can help resolve symptoms like a loose control panel, rattling at the door edge, or exposed electronics

• One left-hand door side control assembly

• Disconnect power to the appliance before starting work to avoid electrical shock
• Remove door panels or trim as needed to access mounting screws; keep hardware for reassembly
• Align assembly carefully and tighten fasteners snugly but do not overtighten plastic threads

This left-side condenser bin holds and protects the refrigerator condenser assembly, keeping airflow pathways clear for efficient cooling and helping prevent debris contact. It's a direct-fit replacement that restores proper condenser support and clearance. What it does

• Secures and positions the condenser coil/assembly to maintain correct airflow
• Shields the condenser from debris that can reduce cooling efficiency
• Prevents condenser contact with other components that can cause rubbing or noise
• Common symptoms: loud/rattling noises near the base, damaged or loose plastic housing, or reduced cooling performance linked to condenser obstruction

• Disconnect power before servicing to avoid electrical shock.
• Handle plastic parts carefully to avoid cracking; confirm clips and mounting tabs align before fastening.
• Use basic hand tools; keep small fasteners organized to prevent loss.

This right-side lower freezer drawer slide allows the freezer drawer to open and close smoothly and keeps the drawer aligned. Replaces a worn or damaged slide to restore stable drawer operation and prevent sticking or sagging. What it does:

• Guides and supports the lower freezer drawer for smooth in-and-out movement
• Replaces a broken, bent or worn right-side slide that causes the drawer to bind or drop
• Restores proper alignment so the drawer seals and closes evenly
• Works with the factory mounting points for a direct replacement

• Disconnect power to the appliance before removing drawers or service panels
• Remove the freezer drawer to access slide mounting screws; keep track of hardware
• Use appropriate hand tools; avoid forcing components to prevent damage

This molded duct assembly directs cold air from the freezer compartment into the fresh-food section to help maintain proper airflow and temperature balance. It replaces a damaged or cracked transition duct to restore directed air circulation. What it does:

• Channels freezer-cooled air into the refrigerator compartment for even cooling distribution
• Helps reduce warm spots in the fresh-food area when functioning correctly
• Can prevent excessive frost or ice buildup caused by misdirected airflow
• Supports proper operation of the freezer-to-fridge venting system

• Disconnect power to the appliance before service to avoid electrical shock
• Remove shelves, drawers, and access panels as needed to reach the duct
• Handle the duct carefully to avoid cracking plastic tabs; use appropriate fasteners when reinstalling

The Hinge Bushing is an OEM part for GE refrigerators designed to fit within the hinge assembly of your refrigerator, providing support and smooth movement for the door.

A bad hinge bushing can be caused by regular wear and tear over time or damage due to mishandling or impact. If you notice that your refrigerator door is not opening or closing smoothly, or if it feels loose or wobbly, it may indicate a problem with the hinge bushing.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the refrigerator door
• Door not staying securely closed
• Door sagging or misaligning with the refrigerator frame

Replace your faulty hinge bushing with this genuine OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This shield trough assembly catches and channels defrost and condensation water away from the refrigerator cabinet to help prevent leaks and ice buildup. It's a direct-fit replacement that restores proper water drainage and containment. What it does

• Collects defrost and condensation runoff and directs it to the drain pan
• Helps prevent water pooling inside the cabinet and under the appliance
• Reduces ice or frost accumulation caused by redirected water
• Provides structural support for adjacent trim and evaporator covers where applicable

• Disconnect power to the appliance before beginning any repair.
• Remove relevant shelves, drawers, and trim panels to access the trough; keep fasteners organized.
• Handle gently to avoid bending or damaging mounting tabs and seal surfaces.

This is a 220v international model icemaker.