Hmc1035sess Parts

The Diode is an OEM part for Bosch microwaves. This small electronic component regulates electricity flow to heating components.

Causes of failure may relate to stresses from continuous power pulsing. Microwave emissions fluctuate temperatures inside rapidly over time stressing connections.

Symptoms of a bad diode include:

• Inconsistent or incomplete cooking from uneven power distribution
• Failure to properly distribute full heating wattage for expected results
• Error code displays or failure to start due to electrical faults in related boards

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement support is the small bracket that holds and positions its mating component so it stays aligned and operates smoothly. Replacing a cracked or missing support restores proper fit, reduces rattling, and helps prevent premature wear. What it does:

• Secures an attached part in the correct position
• Maintains alignment and spacing to prevent rubbing or binding
• Helps reduce vibration, looseness, and noise from misaligned components
• Typical signs of failure: broken tabs, missing piece, loose or sagging part

• 1 support

• Disconnect power; shut off water supply if applicable
• Note the original orientation and location before removal; install the new support the same way
• Handle sharp panels and delicate plastic tabs with care to avoid damage
• Verify smooth operation of the supported component after reassembly

This replacement drive motor powers the wash drum in your machine, supplying the torque needed to tumble clothing and complete cycles under load. Replace a weak, seized, or noisy motor to restore smooth, reliable drum movement.

• Drives the drum/tub during wash and rinse cycles
• Common failure signs: drum won't turn/tumble or stops mid-cycle
• May hum, overheat, or emit a burning smell when failing
• Starts then stalls or trips the breaker on startup
• Some models may show a motor/drive-related error code

• Disconnect power before servicing; allow moving parts to stop completely
• Access the motor per your model (rear or bottom panel on most units)
• Label and disconnect wiring, remove mounting hardware, swap in the new motor
• Reassemble, ensure smooth drum rotation by hand, then run a test cycle

This light socket holds the appliance bulb and provides a secure electrical connection, restoring reliable interior lighting. Replace a cracked, heat-damaged, or loose socket to fix lights that don't come on even with a good bulb.

• Provides the electrical contacts and mechanical support for the light bulb
• Helps resolve no-light or intermittent flicker when the bulb and switch are OK
• Common failure signs: discoloration, melting, burn marks, or loose/broken contacts
• Restores dependable illumination in the designated lighting location

• Disconnect power at the breaker and allow the appliance to cool before servicing
• Wear cut-resistant gloves and eye protection; handle bulbs by the base, not the glass
• Note wire positions and transfer connectors one at a time to the new socket
• Seat the bulb fully and test operation before reinstalling any covers or panels

This high-voltage transformer steps household power up to energize the magnetron, enabling proper heating in your microwave. Replace it if the unit powers on but doesn't heat, hums loudly, or intermittently blows a fuse.

• Supplies the high voltage needed for magnetron operation
• Common symptoms when failing: runs but no heat
• May cause loud humming, burning odor, or tripped breaker/fuse
• Visible overheating or damage on the transformer can indicate failure

• Unplug the appliance; the high-voltage capacitor can retain a dangerous charge
• Document wire locations and transformer orientation before removal
• Reuse original mounting hardware/brackets and secure all connections firmly

The Halogen Lamp is an OEM component specifically designed for select Bosch downdraft ventilation hoods. As an illumination source, it provides sufficient light for safe nighttime cooktop use.

Toughened outer casings protect encased bulbs against accidental breakage. Ventilated globe designs dissipate heat for prolonged lamp life while avoiding premature degradation.

Causes requiring replacement relate to cumulative burning hours expended. Direct physical impacts could also crack protective glass allowing water damage that accelerates filament failure. 

Symptoms of a bad lamp include:

• Diminished lighting failing to sufficiently illuminate cook surfaces   
• Flickering or inability to power on through expected lifecycles
• Broken housing fragments exposing live connectors to short circuits

This OEM Bosch replacement halogen lamp is also compatible with Thermador, Gaggenau, and some Kenmore range hoods employing self-contained lighting solutions. Proper bulb installation will restore intended visibility for safe evening meals.
 

This replacement lamp is the light bulb used in select Bosch appliances. It restores clear visibility during normal operation, helping you see inside the unit or work area whenever the light is activated. What it does:

• Provides illumination when the door opens or the light switch is turned on
• Replaces a burned-out, dim, or broken bulb
• Common symptoms include: light does not turn on, flickers, or works intermittently
• Visible clues may include a darkened glass envelope or broken filament

• 1 lamp

• Disconnect power to the appliance before servicing; allow the bulb and surrounding area to cool
• Access the light assembly and remove the lens/cover as directed in your model's instructions
• Remove the old bulb and install the new lamp without forcing; reinstall the cover securely
• Restore power and test operation; use only the bulb type and wattage specified for your model

The Thermistor is an OEM part for Bosch microwaves. This part is responsible for monitoring and regulating the temperature inside the microwave cavity during operation. It measures the temperature and sends signals to the control board, allowing the microwave to adjust its power output accordingly.

A bad thermistor can occur due to damage, electrical malfunctions, or temperature sensor failure. Signs of a faulty thermistor include inconsistent heating, overcooked or undercooked food, or error messages displayed on the microwave's control panel.

Symptoms of a bad thermistor include:

• Inconsistent heating  
• Error messages displayed

Replace your malfunctioning or damaged microwave thermistor with this genuine OEM Bosch part to restore your microwave. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Frequency Filter is an OEM replacement part for Bosch microwave ovens. Located inside the control panel casing, it prevents electromagnetic interference between electronic circuits. The frequency filter ensures precise cooking settings by filtering out radio waves and high-frequency noise.

Symptoms of a faulty frequency filter include:

• Settings appearing arbitrarily changed or unresponsive  
• Error codes signaling control malfunctions
• Microwave failing to heat or function as anticipated
• Buzzing, crackling, or whining noises emitting from inside

Causes of a bad frequency filter typically involve failures over extended usage. Repeated filtering can degrade or displace sensitive parts interfering with operations. 

Replacing your frequency filter restores reliable cooking and cabinet protection. This genuine Bosch component prevents future issues. Compatible with Thermador, Gaggenau, and select Kenmore microwaves.

This replacement remote control restores convenient, across-the-room operation of your air conditioner. Replace a lost, damaged, or unresponsive remote to regain reliable control of power, temperature, and modes without touching the unit.

• Sends commands to the air conditioner's receiver to adjust power, temperature, mode, and fan settings
• Common fix for no response to button presses, intermittent control, or needing to stand very close to the unit
• Restores normal operation when the original remote is lost, cracked, or has worn-out buttons

• Install fresh batteries with correct polarity (+/-)
• Aim the remote at the unit's receiver with a clear line of sight; remove obstructions
• If the unit does not respond, replace batteries and power-cycle the A/C before further diagnosis

The Capacitor is an OEM part for Bosch vent hoods. This part temporarily stores electrical energy to generate stable high voltage for halogen light operation.

Situated near the light ballast, the capacitor traps charges that build up after each discharge then holds them for instantaneous delivery during the next bulbs ignition. This allows continuous high-frequency halogen lighting for enhanced visibility over cooktops.

Symptoms of a faulty capacitor include:

• Dim or flickering halogen lights failing to illuminate as intended
• Buzzing noises or humming from internal components
• Lights refusing to trigger on or operating intermittently
• Tripped circuit breakers due to capacitor malfunction

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This facia panel is the front console cover for the unit's user interface. Replacing a cracked or worn panel restores a clean appearance and provides proper support and alignment for the controls.

• Covers the control console where cycles and options are selected
• Provides mounting structure for the user interface components
• Helps shield internal components from incidental moisture and debris
• Common signs of failure: visible cracks, broken tabs/clips, panel won't stay secured, controls feel loose or misaligned

• Disconnect power to the appliance; turn off the water supply
• Open the console/door and remove the fasteners securing the existing facia
• Transfer any brackets, seals, or trim from the old panel to the new one
• Reinstall, check control alignment, and avoid overtightening fasteners

This filter module conditions incoming AC power and suppresses electrical interference to help protect the appliance's electronics. Replacing a failed module can restore stable operation when power-related faults cause no-starts or intermittent behavior.

• Suppresses electrical noise (EMI/RFI) on the incoming power line
• Helps deliver clean, stable power to the control system
• Failure symptoms include no power, intermittent shutdowns, tripped breaker/fuse, or repeated control resets
• Typically mounted near the appliance's power-entry area

• Disconnect power at the breaker and verify no voltage before servicing
• Access the module at the power-entry area; photograph or label wires before removal
• Move wires one at a time to the new module to maintain correct connections
• Inspect the power cord, connectors, and strain relief; replace any heat-damaged parts

The Vent Hood Air Filter is an OEM part for Bosch vent hoods. Located inside the hood cavity, it traps grease, smoke, and other cooking residue to keep the ventilation system functioning optimally. 

Causes of a bad air filter can include normal accumulation of grime over prolonged use without replacement, exposure to excessively greasy cooking vapors, or damage from cleaning.

Symptoms of a bad vent hood air filter include:

• Reduced or inefficient ventilation from the hood  
• Untrapped grease and residue collecting on internal surfaces
• Offensive odors escaping back into the kitchen rather than outside
• Increased noise from the ventilation motor straining 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This fan motor circulates air through the appliance to cool internal components and maintain proper operating temperature. Replacing a worn motor restores airflow and can reduce overheating or abnormal noise. What it does:

• Spins the condenser/blower fan to move air over coils and heat-producing parts
• Restores airflow when a motor has failed or slowed
• Commonly linked to symptoms like loud grinding or squealing, reduced/no airflow, or overheating
• Helps the appliance maintain proper temperatures for reliable operation

• One fan motor (single unit as pictured)

• Disconnect power before servicing to avoid shock or injury
• Inspect mounting, fan blade, and wiring harness for damage before installing
• Use the correct connector and secure mounting to prevent vibration and noise

The Module Operating is an OEM part for Bosch chimney-style range hoods. As the main control center, it regulates all hood functions including fan speeds, lights, timers, and sensors. Working seamlessly with other internal components, the operating module ensures precise hood operation.

Causes of a bad operating module can include water damage, failure of electronic components over time, or damage from power surges. 

Symptoms of a bad operating module include: 

• Inability to turn hood functions on or off
• Lights not illuminating when selected  
• Preset fan speeds not engaging properly
• Unusual noises or behaviors from internal workings

This Bosch operating module replacement restores full functionality to the hood. It is also compatible with some Thermador, Gaggenau, and Broan-NuTone models. Replacing the module ensures precise performance and conveniences like easy access to controls.