Hmv5052u Parts

This high-voltage transformer delivers the elevated voltage pulses used by the appliance ignition system to produce sparks for burner ignition. It replaces a failed transformer to restore reliable spark generation and ignition performance. What it does

• Steps up voltage to the ignition/igniter circuit so sparks form at the burner or igniter
• Common symptom: no spark or weak/intermittent sparking during attempted ignition
• Can help resolve ignition failure or repeated relighting when the transformer is the faulty component
• Works as the electrical source for spark modules or igniters in compatible appliance models

• One high-voltage transformer

• Turn off electrical power and gas supply before starting any service
• Handle and test high-voltage components cautiously; avoid contact with terminals when powered

A replacement electronic control board that manages the appliance's user interface, sensors and timed cycles so the unit responds correctly to settings and commands. Restores control functions when the original board fails. What it does:

• Processes user inputs and runs timed cycles for proper operation
• Communicates with sensors and other modules to regulate functions
• Can stop erratic behavior caused by a faulty control board
• Common symptom indicators: unresponsive controls, error codes, or intermittent operation

• Disconnect power to the appliance before starting any work
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available
• Verify model compatibility with the appliance before installing

This replacement support bracket restores secure mounting for the affected appliance component, helping stop movement and reduce noise. A direct-fit part that brings back stable alignment and reliable operation. What it does:

• Provides structural support to the associated component to prevent sagging or shifting
• Restores proper alignment to reduce rubbing, vibration, or rattling noises
• Replaces cracked, bent, or worn supports that can compromise component seating
• Helps ensure connected parts operate smoothly by holding them in the correct position

• Disconnect power and, if applicable, water supply before starting any repair
• Use basic hand tools; follow the schematic for removal and reassembly
• Inspect adjacent fasteners and mounting points; replace any damaged hardware for a secure fit

This is a replacement mounting screw used to secure panels and components in compatible Bosch appliances. It restores proper fastening to help eliminate loose parts, rattles, and misaligned panels during operation. What it does:

• Secures panels, brackets, trim pieces, or small components to restore stable attachment
• Prevents movement that can cause rattling, noise, or misalignment
• Replaces missing or stripped hardware to help maintain normal function and safety
• Small, unobtrusive fastener designed for OEM-fit replacement

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct-size screwdriver or driver bit to avoid stripping the head
• Tighten securely but avoid overtightening, which can strip threads or crack plastic
• Keep small parts out of reach of children and retain any removed hardware for reassembly

Replacement support mounting bracket that secures internal components and restores proper alignment in your appliance. Helps reduce vibration and rattling caused by loose or worn mounting points for smoother, quieter operation. What it does:

• Provides a stable mounting point to hold internal parts in position
• Reduces vibration and rattling that can occur from loose or broken supports
• Restores proper alignment to connected components for reliable operation
• Prevents further wear or damage caused by shifting parts

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Use basic hand tools; handle brackets and fasteners carefully to avoid stripping or damage
• Keep track of any screws or clips removed and reinstall them in the original locations

This temperature regulator is the thermostat control that helps maintain the correct interior temperature by cycling the cooling system on and off. It replaces a failed regulator to restore steady temperature control and reduce temperature swings. What it does:

• Senses and regulates appliance temperature to keep the compartment within set range
• Cycles the compressor or cooling components to maintain consistent cooling
• Commonly used when interior temperature is too warm, fluctuating, or compressor runs continuously
• Works with the appliance's control system to trigger cooling actions as needed

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and terminals carefully; avoid bending or stressing the connector
• Verify correct orientation and secure mounting; confirm electrical connector is fully seated

This fan motor circulates air inside the appliance to support cooling and ventilation, restoring proper airflow and helping prevent overheating. It replaces a worn or failed motor to reduce noise and restore normal operation. What it does:

• Spins the blower wheel to move air for cooling, ventilation or drying functions
• Stops unusual noises caused by worn bearings or imbalanced operation
• Restores airflow when the appliance shows reduced or no air movement
• Helps prevent overheating by maintaining proper internal ventilation

• Disconnect power before starting any repair to avoid electrical shock
• Handle the motor and wiring harness carefully to avoid damage
• Basic hand tools may be required; follow OEM disassembly steps for your model

This small mounting nut secures components in place to maintain stable operation and prevent parts from loosening during normal use. It restores proper fastening where a worn or missing nut causes rattling or loose assemblies. What it does

• Secures panels, brackets, or hardware to prevent movement and vibration
• Restores correct fastening where stripped, missing, or corroded nuts cause noise or misalignment
• Helps maintain electrical and mechanical connections by holding terminals or studs firmly
• Simple, low-profile replacement part used in service and repairs

• Turn off power and unplug the appliance before attempting any repair.
• Use the correct wrench or socket size to avoid rounding the nut; apply moderate torque.
• Inspect mating threads and replace damaged studs or bolts as needed for a secure fit.

This adhesive sticker replaces a missing, damaged, or faded label on your appliance to restore identifying or instructional markings. It's a direct-fit cosmetic and informational label that adheres to a clean surface. What it does:

• Provides factory-style labeling for identification, instructions, or branding
• Restores legible markings when originals are worn, torn, or faded
• Helps owners read required information during service or setup
• Maintains the appliance's finished appearance by covering damaged labels

• One adhesive sticker/label

• Surface must be clean, dry, and free of grease or residue before applying
• Peel backing and press firmly, smoothing out air bubbles for full contact
• Avoid applying to hot surfaces; allow appliance to cool before installation
• For service-related information, record any original data before removing the damaged label

This door handle replaces a worn or damaged appliance door grip to restore safe, reliable opening and closing. It provides a secure hold and a finished look so the door operates properly and looks like new. What it does:

• Replaces a cracked, loose, or broken door handle to restore normal door function
• Provides a secure grip for opening and closing the appliance door
• Helps prevent further damage to the door or latch from using a compromised handle
• Matches original mounting points for a direct-fit replacement when the correct part number is used

• Disconnect power and empty the door (shelves/contents) before starting
• Use common hand tools; handle is typically secured with screws or clips—retain hardware if in good condition
• Do not overtighten fasteners to avoid cracking the handle or door

This inner door access cover protects internal dishwasher components behind the door and helps keep wiring and controls secure. It restores a clean, finished appearance and prevents dust or debris from reaching sensitive parts. What it does:

• Shields wiring, connectors and small components located inside the door cavity
• Keeps control and dispenser areas protected from dirt, moisture and accidental contact
• Helps maintain proper alignment of door-mounted parts and prevents rattling or abrasion
• Commonly replaced when the cover is cracked, broken, missing, or interferes with door operation

• One inner door access cover

• Installation typically requires removing the inner door panel and using common hand tools; follow the appliance's service manual
• Disconnect power to the appliance before beginning any repairs to avoid shock or injury
• Inspect surrounding clips and fasteners and replace any that are damaged to ensure a secure fit

This is a genuine replacement screw used to secure components on compatible Bosch appliances, restoring proper fit and function where original fasteners have become lost or damaged. What it does:

• Fastens appliance panels, brackets, or internal components to maintain structural stability
• Replaces stripped, corroded, or missing screws to stop rattling or loose parts
• Helps ensure secure electrical and mechanical connections by holding parts in correct position
• Used where the OEM screw size and thread match the factory application

• One replacement screw as shown

• Verify screw size and thread match the original before installation
• Use appropriate driver bit and moderate torque to avoid stripping threads
• Disconnect power and follow manufacturer safety instructions before accessing internal components

This cable supply is the replacement power harness that routes electrical power between the appliance control and internal components, restoring lost power connections and enabling normal operation. Use this harness to replace damaged or frayed wiring. What it does

• Delivers electrical power between the control board and internal components so the appliance can run.
• Replaces cracked, frayed, or burned wiring that can cause intermittent power loss or failure to start.
• Helps stop arcing, shorting, and error codes caused by damaged connections.
• Restores reliable connections when original harness insulation or terminals are compromised.

• One cable supply / power harness

• High-level replacement only; disconnect power at the breaker before starting.
• Inspect mounting clips and strain reliefs; reuse or replace as needed to prevent future wear.