Hps10lsbrss Parts

This right door hinge buckle keeps the refrigerator door aligned and secured to the cabinet, restoring smooth opening and reliable closing. It's a direct-fit hinge component designed for the right/upper door mounting location. What it does:

• Supports the door pivot and holds the door in the correct position
• Prevents door sagging, uneven gaps, and misalignment during use
• Helps the door close fully to maintain a proper seal
• Works with existing hinge pin and mounting hardware to stabilize the door

• Disconnect power and remove all items from the door before starting
• Support the door while removing and installing the hinge to prevent dropping or damage
• Retain and reuse existing screws and hinge pin unless replacements are specified

This left door hinge (buckle) secures the refrigerator/freezer door to the cabinet and provides a smooth pivot for opening and closing. It replaces worn or damaged hinge hardware to help restore proper door alignment and operation. What it does:

• Provides the pivot point that supports and aligns the left door
• Keeps the door securely attached while allowing smooth opening and closing
• Helps prevent sagging, misalignment, rubbing, or gaps that can affect seal performance
• Works with the hinge pin and mounting hardware to maintain correct door movement

• Turn power off and remove food from the door area before starting any work
• Use appropriate tools and support the door during removal and installation to avoid injury or damage
• Inspect associated hinge pin, screws, and mounting points; replace any worn components as needed

This cold control housing duct directs cold-air flow around the refrigerator's cold control assembly to help maintain consistent temperature control. It replaces cracked or damaged housings that can allow air leaks or improper airflow. What it does:

• Channels cold air around the thermostat/cold control for reliable temperature sensing
• Protects the control assembly from direct airflow and debris that can affect operation
• Helps prevent air leaks that lead to uneven cooling or excessive run time

• Intended to be installed by someone familiar with appliance disassembly; follow manufacturer instructions
• Disconnect power to the appliance before beginning any repair to avoid shock
• Handle gently to avoid breaking plastic tabs; confirm proper fit before reassembling panels
• No special tools required beyond common hand tools; your model diagram for removal steps

This stainless steel freezer door replaces a damaged or dented outer door to restore appearance and proper sealing. Designed for direct replacement to help maintain temperature control and keep frozen food protected. What it does:

• Replaces a dented, scratched, or corroded freezer door to restore the cabinet's finished look
• Provides the outer barrier that supports the freezer gasket and helps keep cold air inside
• Helps stop common symptoms like poor door sealing, visible cosmetic damage, or rattling/loose door fit
• Restores a clean exterior surface for matched appliance aesthetics

• Handle with care to avoid damaging finish
• Disconnect power and empty door contents before removing the old door
• Keep all fasteners and mounting hardware; replace only if explicitly listed as included
• Check door alignment and gasket condition after install to ensure a proper seal

The Starter is an OEM part for GE refrigerators. It aids in starting the compressor, which is responsible for circulating refrigerant and maintaining the desired temperature inside the appliance.

A bad compressor starter can occur due to electrical issues, wear and tear, or component failure. If you notice symptoms such as the refrigerator not cooling properly, unusual noises coming from the compressor area, or the compressor not starting at all, it may indicate a faulty or malfunctioning starter.

Symptoms of a bad compressor starter include:

• Buzzing sound coming from the refrigerator
• Compressor not turning on or running intermittently
• Compressor not starting or running intermittently

Restore your refrigerator by replacing the faulty compressor starter with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This is a replacement mounting screw used to secure components inside compatible GE appliances. It restores proper fastening where the original screw is missing, stripped, or damaged so parts stay aligned and operate safely. What it does:

• Fastens trim panels, brackets, or internal components to appliance cabinet and chassis
• Replaces missing or damaged screws that can cause rattling, misalignment, or loose parts
• Helps maintain proper component alignment for reliable operation
• Simple hardware repair to restore original fit where the factory screw is lost or worn

• Verify screw size and thread match the original before installation
• Use correct driver to avoid stripping the head; tighten until snug but do not overtighten
• Disconnect power to the appliance before working near electrical components

This is a replacement evaporator cover screw that secures the evaporator cover/trim in the refrigerator evaporator compartment, restoring proper panel fit and helping maintain airflow and temperature control. What it does:

• Fastens the evaporator cover or trim to the evaporator housing or cabinet
• Keeps the evaporator cover secure to prevent rattling and air leaks
• Helps maintain correct airflow over the evaporator for consistent cooling
• Small hardware solution for loose or missing evaporator cover mounting points

• One evaporator cover screw (quantity: 1)

• Intended for use where the evaporator cover screw is missing, stripped, or damaged
• Use matching screwdriver/drill bit and avoid over-tightening to prevent stripping the hole or cracking plastic trim
• Disconnect power to the appliance before accessing internal components and work with caution around sharp sheet metal and cold evaporator surfaces

This cross-recessed hexagon bolt secures appliance components where a low-profile, cross-drive head and hex socket are required, restoring fit and preventing rattles or loose parts. Simple replacement for a single fastener. What it does:

• Fastens panels, brackets, or assemblies to hold parts securely in place.
• Stops vibration-related noise or movement caused by a loose or worn bolt.
• Provides a reliable drive profile for a screwdriver or bit to tighten or remove.
• Used wherever the appliance design specifies a cross-recessed hexagon head fastener.

• One hexagon bolt (cross-recessed) — only the bolt shown.

• Disconnect power and water before servicing to avoid shock or injury.
• Match the bolt location and orientation; hand-start threads to avoid cross-threading.
• Tighten snugly but do not overtighten — excessive force can strip threads or damage components.
• Use the correct screwdriver/bit size for a clean engagement with the cross recess.

A replacement middle hinge plug (button) that covers the refrigerator's center hinge area for a neat, finished appearance and helps keep dirt and moisture out of the hinge cavity. What it does:

• Covers the middle hinge opening to protect hinge components from dirt and debris
• Restores the appliance's finished look after a broken or missing plug
• Helps reduce exposure of the hinge to moisture that can accelerate wear
• Can prevent small items from getting caught in the hinge cavity and affecting operation

• Typically snaps into the hinge opening—no special tools required for most models
• Align plug with the hinge cavity and press firmly until it seats; avoid forcing to prevent damage
• Remove/install the plug as directed by your service manual

This wiring box cover protects the appliance's terminal block and wiring junction, keeping wires secure and reducing exposure to electrical contacts. It restores a finished, safe access point for the wiring compartment. What it does:

• Covers and protects the terminal block/wiring junction from accidental contact
• Helps keep dust and debris out of the wiring compartment
• Secures wiring in place to prevent snagging or strain on connections
• Restores the factory access cover for safe servicing and operation

• One wiring box cover

• Disconnect power to the appliance before starting any work
• Use basic hand tools (screwdriver) to remove the old cover and fasten the replacement
• Ensure all wires and terminals are tucked safely inside the box before installing the cover
• If terminals or wiring are damaged, replace or repair them before re-applying power.